Investigation of Eccentrically Loaded CFRP-Confined Elliptical Concrete Columns
Publication: Journal of Composites for Construction
Volume 12, Issue 1
Abstract
This paper presents a finite-element analysis study of elliptical concrete columns, converted from rectangular cross sections and confined with carbon fiber-reinforced polymers (CFRP) through an enhancement/strengthening procedure, under eccentric loadings. The parameters considered for the finite-element analysis study include various eccentric loads, and the number of CFRP layers as well as their orientation with respect to circumferential axis of concrete columns. Validation of the finite-element model was performed leveraging an experimental study reported in the literature. Study findings suggest that eccentric loading versus concentric loading considerably reduces the efficiency of the CFRP wrapping. The study, however, also shows that it is possible to diminish the adverse effect of eccentric loading through proper adjustment of the wrap configuration, i.e., the number of layers as well as the orientation of the fibers.
Get full access to this article
View all available purchase options and get full access to this article.
References
Bangash, M. Y. H. (2001). Manual of numerical methods in concrete-modeling and applications validated by experiment and site monitoring data, Telford, London.
Chaallal, O., and Shahawy, M. (2000). “Performance of fiber-reinforced polymer-wrapped reinforced concrete column under combined axial-flexural loading.” ACI Struct. J., 97(4), 659–668.
De Lorenzis, L., and Tepfers, R. (2003). “Comparative study of models on confinement of concrete cylinders with fiber-reinforced polymer composites.” J. Compos. Constr., 7(3), 219–237.
Fam, A., Mandal, S., Schnerch, D., and Rizkalla, S. (2003). “Rectangular FRP tubes filled with concrete for beam and column applications.” Proc., 6th Int. Symp. on Fiber-Reinforced Polymer Reinforcement for Concrete Structures (FRPRCS-6), Singapore, 685–694.
Harmon, T. G., Ramakrishnan, S., and Wang, E. H. (1998). “Confined concrete subjected to uniaxial monotonic loading.” J. Eng. Mech., 124(12), 1303–1309.
Harries, K. A., and Carey, S. A. (2003). “Shape and gap effects on the behavior of variably confined concrete.” Cem. Concr. Res., 33(6), 881–890.
Li, G., Kidane, S., Pang, S. S., Helms, J. E., and Stubblefield, M. A. (2003). “Investigation into FRP repaired RC columns.” Compos. Struct., 62(1), 83–89.
Li, J., and Hadi, M. N. S. (2003). “Behavior of externally confined high-strength concrete columns under eccentric loading.” Compos. Struct., 62(2), 145–153.
Maalej, M., Tanwongsval, S., and Paramasivam, P. (2003). “Modeling of rectangular columns strengthened with FRP.” Cem. Concr. Compos., 25(2), 263–276.
Mandal, S. K., and Mansur, M. A. (2001). “Strength and ductility of concrete confined by external wrap.” ACI Special Publication (SP200-42), 200(42), 677–692.
MSC.Marc. (2005). MSC Software Corporation, Santa Ana, Calif.
Mukherjee, A., Boothby, T. E., Bakis, C. E., Joshi, M. V., and Maitra, S. R. (2004). “Mechanical behavior of fiber-reinforced polymer-wrapped concrete columns-complicating effects.” J. Compos. Constr., 8(2), 97–103.
Neville, A. M. (1996). Properties of concrete, Wiley, New York.
Parretti, R., and Nanni, A. (2002). “Axial testing of concrete columns confined with carbon CFRP: Effect of fiber orientation.” Proc., 3rd. Int. Conf. on Composites in Infrastructure, San Francisco.
Parvin, A., and Jamwal, A. (2005). “Effects of wrap thickness and ply configuration on composite-confined concrete cylinders.” Compos. Struct., 67(4), 437–442.
Parvin, A., and Wang, W. (2001). “Behavior of FRP jacketed concrete columns under eccentric loading.” J. Compos. Constr., 5(3), 146–152.
Picher, F., Rochette, P., and Labossiere, P. (1996). “Confinement of concrete cylinders with CFRP.” Proc., 1st Int. Conf. on Composites in Infrastructure (ICCI’96), Tucson, Ariz., 829–841.
Priestley, M. J. N., and Seible, F. (1995). “Design of seismic retrofit measures for concrete and masonry structures.” Constr. Build. Mater., 9(6), 365–377.
Priestley, M. J. N., Seible, F., Xiao, Y., and Verma, R. (1994). “Steel jacket retrofitting of reinforced concrete bridge columns for enhanced shear strength. 1: Theoretical considerations and test design.” ACI Struct. J., 91(4), 394–405.
Prota, A., Manfredi, G., and Cosenza, E. (2003). “Confinement of RC rectangular columns using GFRP.” Proc., 6th. Int. Symp. on Fiber-Reinforced Polymer Reinforcement for Concrete Structures (FRPRCS-6), Singapore, 653–662.
Scotta, R., Vitaliani, R., Saetta, A., Onate, E., and Hanganu, A. (2001). “A scalar damage model with shear retention factor for the analysis of reinforced concrete structures: Theory and validation.” Comput. Struct., 79(7), 737–755.
Tan, K. H. (2002). “Strength enhancement of rectangular reinforced concrete columns using fiber-reinforced polymer.” J. Compos. Constr., 6(3), 175–183.
Teng, J. G., and Lam, L. (2002). “Compressive behavior of carbon fiber reinforced polymer-confined concrete in elliptical columns.” J. Struct. Eng., 128(12), 1535–1543.
Xiao, Y., and Wu, H. (2000). “Compressive behavior of concrete confined by carbon fiber composite jackets.” J. Mater. Civ. Eng., 12(2), 139–146.
Yang, X., Wei, J., Nanni, A., and Dharani, L. R. (2004). “Shape effect on the performance of carbon fiber reinforced polymer wraps.” J. Compos. Constr., 8(5), 444–451.
Information & Authors
Information
Published In
Copyright
© 2008 ASCE.
History
Received: Jul 14, 2006
Accepted: Oct 10, 2006
Published online: Feb 1, 2008
Published in print: Feb 2008
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.