Modeling the Behavior of Fiber Reinforced Polymer-Confined Concrete Columns Exposed to Fire
Publication: Journal of Composites for Construction
Volume 9, Issue 1
Abstract
Very little information is available on the behavior of fiber reinforced polymer (FRP) materials and FRP-strengthened concrete members in fire, and this is a primary factor hindering the widespread implementation of FRP strengthening technologies in the construction industry. This paper presents a numerical model for evaluating the fire behavior of conventionally reinforced circular concrete columns, FRP-wrapped reinforced concrete columns, and insulated FRP-wrapped reinforced concrete columns. The model is validated against data available in the literature from full-scale fire endurance tests on conventionally reinforced concrete columns, and preliminary predictions of the model are presented and discussed. It is demonstrated that the model agrees reasonably well with experimental data obtained from tests on circular reinforced concrete columns, that it is unlikely that the structural effectiveness of FRP materials can be maintained during fire, and that the fire behavior of FRP-wrapped columns can be dramatically improved by providing supplemental insulation for the FRP.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers are members of the Intelligent Sensing for Innovative Structures Network (ISIS Canada) and wish to acknowledge the support of the Networks of Centres of Excellence Program of the Government of Canada and the Natural Sciences and Engineering Research Council of Canada. The writers would also like to acknowledge the financial contributions of the National Research Council of Canada and Queen’s University, Canada.
References
ACI. (1995). “Building code requirements for structural concrete.” ACI 318-95, Farmington Hills, Mich.
ACI. (2002). “Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures.” ACI 440.2R-02, Farmington Hills, Mich.
ASCE Committee in Fire Protection. (1992). Structural fire protection, Manual and Report No. 78, New York.
ASTM. (2001). “Standard methods of fire test of building construction and materials.” E 119-01, West Conshohocken, Pa.
Bisby, L. A. (2003). “Fire behavior of FRP reinforced or confined concrete.” PhD thesis, Dept. of Civil Engineering Queen’s Univ., Kingston, Ont., Canada.
Blontrock, H., Taerwe, L., and Matthys, S. (1999). “Properties of fiber reinforced plastics at elevated temperatures with regard to fire resistance of reinforced concrete members.” Fibre Reinforced Polymer Reinforcement for Reinforced Concrete Structures, ACI, Detroit, 43–54.
Buchanan, A. H. (2001). Structural design for fire safety, Wiley, New York.
Franssen, J.-M., and Dotreppe, J.-C. (2003). “Fire tests and calculation methods for circular concrete columns.” Fire Technol., 39, 89–97.
Griffis, C. A., Masmura, R. A., and Chang, C. I. (1984). “Thermal response of graphite epoxy composite subjected to rapid heating.” Environmental effects on composite materials, Vol. 2, Technomic, Lancaster, Pa., 245–260.
Intelligent Sensing for Innovative Structures (ISIS). (2001). Strengthening reinforced concrete structures with externally bonded fiber reinforced polymers, Winnipeg, Man., Canada.
Katz, A., and Berman, N. (2000). “Modeling the effect of high temperature on the bond of FRP reinforcing bars to concrete.” Cem. Concr. Compos., 22, 433–443.
Kodur, V. K. R., and Baingo, D. (1998). “Fire resistance of FRP reinforced concrete slabs.” IRC Internal Rep. No. 758, National Research Council of Canada, Ottawa.
Lie, T. T., and Celikkol, B. (1991) “Method to calculate the fire resistance of circular reinforced concrete columns.” ACI Mater. J., 88(1), 84–91.
Lie, T. T., Chabot, M., and Irwin, R. J. (1992). “Fire resistance of circular hollow steel sections filled with bar-reinforced concrete.” IRC Rep. 636, National Research Council of Canada, Ottawa.
Mander, J. B., Priestley, M. J. N., and Park, R. (1988). “Theoretical stress-strain model for confined concrete.” J. Struct. Eng., 114(8), 1804–1823.
Manfredi, G., and Realfonzo, R. (2001). “Models for concrete confined by fiber composites.” Proc., 5th Annual Symp. on Fibre-Reinforced-Plastic Reinforced for Concrete Structures, Thomas Telford, London, 865–874.
Popovics, S. (1973). “Numerical approach to the complete stress-strain relation for concrete.” Cem. Concr. Res., 3(5), 583–599.
Sorathia, U., Dapp, T., and Beck, C. (1992). “Fire performance of composites.” Mater. Eng., 109(11), 10–12.
Spoelstra, M. R., and Monti, G. (1999). “FRP-confined concrete model.” J. Compos. Constr., 3(3), 143–150.
Information & Authors
Information
Published In
Copyright
© 2004 ASCE.
History
Received: Aug 6, 2003
Accepted: May 11, 2004
Published online: Feb 1, 2005
Published in print: Feb 2005
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.