Modeling Pile Capacity Using Support Vector Machines and Generalized Regression Neural Network
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 134, Issue 7
Abstract
This note investigates the potential of support vector machines based regression approach to model the static pile capacity from dynamic stress-wave data. A data set of 105 prestressed precast high strength concrete spun pipe piles is used. Radial basis function and polynomial kernel based support vector machines were used to model the total pile capacity and results were compared with a generalized regression neural network approach. A total of 81 data set were used to train, whereas the remaining 24 data sets were used to test the created model. A correlation coefficient value of 0.977 was achieved by generalized regression neural network in comparison to values of 0.967 and 0.964 achieved by radial basis function and polynomial kernel based support vector machines, respectively. Results suggest an improved performance by generalized regression neural network based approach in comparison to support vector machines but polynomial kernel based support vector machines provide a linear relationship to predict total pile capacity using stress-wave data.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The stress-wave data set used in this study was provided by Dr. T. M. H. Lok, Faculty of Science and Technology, University of Macau, Av. Padre Tomás Pereira S.J., Taipa, Macao, China. The writers would like to thank three anonymous reviewers for their constructive comments that led to the improvement of this manuscript.
References
Abu Keifa, M. A. (1998). “General regression neural networks for driven piles in cohesionless soil.” J. Geotech. Geoenviron. Eng., 124(12), 1177–1185.
Chan, W. T., Chow, Y. K., and Liu, I. F. (1995). “Neural networks: An alternative to the pile driving formulas.” Comput. Geotech., 17(2), 135–156.
Chow, Y. K., Chan, W. T., Liu, I. F., and Lee, S. L. (1995). “Predication of pile capacity from stress-wave measurements: A neural network approach.” Int. J. Numer. Analyt. Meth. Geomech., 19(2), 107–126.
Cigizoglu, H. K. (2005). “Application of generalized regression neural networks to intermittent flow forecasting and estimation.” J. Hydrol. Eng., 10(4), 336–341.
Coyle, H. M., and Castello, R. R. (1981). “New design correlations for piles in sand.” J. Geotech. Engrg. Div., 107(7), 965–986.
Dibike, Y. B., Velickov, S., Solomatine, D. P., and Abbott, M. B. (2001). “Model induction with support vector machines: Introduction and applications.” J. Comput. Civ. Eng., 15(3), 208–216.
Fragaszy, R. J., Higgins, J. D., and Lawton, E. C. (1985). “Development of guidelines for construction control of pile driving and estimation of pile capacity (Phase I).” Rep. No. WA-RD-68.1, Washington State Dept. of Transportation, Olympia, Wash.
Gill, M. K., Asefa, T., Kemblowski, M. W., and Makee, M. (2006). “Soil moisture prediction using support vector machines.” Environ. Urbanization, 42(4), 1033–1046.
Goh, A. T. C. (1996). “Pile driving records reanalyzed using neural networks.” J. Geotech. Engrg., 122(6), 492–495.
Juang, C. H., and Jiang, T. (2003). “A new approach to site characterization using generalized regression neural network.” Geotech. Spec. Publ., 121, 79–99.
Juang, C. H., Jiang, T., and Christopher, R. (2001). “Three-dimensional site characterization—Neural network approach.” Geotechnique, 51(9), 799–809.
Kurup, P. U., and Griffin, E. P. (2006). “Prediction of soil composition from cpt data using general regression neural network.” J. Comput. Civ. Eng., 20(4), 281–289.
Lok, T. M. H., and Che, W. F. (2004). “Axial capacity prediction for driven piles using ann: Model comparison.” GeoTrans 2004, Geotechnical Engineering for Transportation Projects (GSP No. 126), M. K. Yegian and E. Kavazanjian, eds.
Meyrehof, G. G. (1976). “Bearing capacity and settlement of pile foundations.” J. Geotech. Engrg. Div., 102(3), 196–228.
Middendorp, P. (2004). “Thirty years of experience with the wave equation solution based on the method of characteristics.” 7th Int. Conf. on the Application of Stress Wave Theory to Piles.
Nawari, N. O., Liang, R., and Nusairat, J. (1999). “Artificial intelligence techniques for the design and analysis of deep foundations.” Electron. J. Geotech. Eng., 4, ⟨http://geotech.civeng.okstate.edu/ejge/Ppr9909/Ppr9909.zip⟩.
Pal, M. (2006). “Support vector machines-based modelling of seismic liquefaction potential.” Int. J. Numer. Analyt. Meth. Geomech., 30(10), 983–996.
Pal, M., and Goel, A. (2006). “Prediction of the end depth ratio and discharge in semicircular and circular shaped channels using support vector machines.” Flow Meas. Instrum., 17(1), 50–57.
Pal, M., and Mather, P. M. (2003). “Support vector classifiers for land cover classification.” Map India 2003, ⟨www.gisdevelopment.net/technology/rs/pdf/23.pdf⟩ (March 25, 2007).
Randolph, M. F. (1985). “Capacity of piles driven into dense sand.” Rep. Soils TR 171, Engineering Dept., Cambridge Univ., Cambridge, U.K.
Rausche, F., Goble, G. G., and Likins, G. E. (1985). “Dynamic determination of pile capacity.” J. Geotech. Engrg., 111(3), 367–383.
Smola, A. J., and Schölkopf, B. (1998). “A tutorial on support vector regression.” NeuroCOLT Technical Rep. No. NC-TR-98-030, Royal Holloway College, Univ. of London, London.
Specht, D. F. (1991). “A general regression neural network.” IEEE Trans. Neural Netw., 2(6), 568–576.
Teh, C. I., Wong, K. S., Goh, A. T. C., and Jaritngam, S. (1997). “Prediction of pile capacity using neural networks.” J. Comput. Civ. Eng., 11(2), 129–138.
Vapnik, V. N. (1995). The nature of statistical learning theory, Springer, New York.
Information & Authors
Information
Published In
Copyright
© 2008 ASCE.
History
Received: May 24, 2007
Accepted: Oct 8, 2007
Published online: Jul 1, 2008
Published in print: Jul 2008
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.