Development of Energy-Efficient Concrete Buildings Using Recycled Plastic Aggregates
Publication: Journal of Architectural Engineering
Volume 11, Issue 4
Abstract
Recycled plastics (high-density polyethylene, polyvinyl chloride, and polypropylene) were used as coarse aggregates in concrete mixtures to alter and improve the thermal properties of buildings. Two similar retail buildings were designed and constructed in Lansing, Mich., one with normal concrete (control) and the other with high content of recycled mixed plastics. The thermal and energy performance of the two buildings were investigated and analyzed. Short-term (air tightness and infiltration, co-heating, lighting) and long-term monitoring were performed. The building simulation program SUNREL developed by the National Renewable Energy Laboratory (NREL) was employed to simulate the energy performance of the two buildings and to validate the experimental data. Both experimental and SUNREL program results showed that the recycled plastic concrete building exhibited higher levels of energy efficiency and comfort when compared with the normal concrete (control) building. Recycled plastic concrete in combination with energy-efficient building design techniques proved to be of tremendous value in lowering the cooling and heating loads of the buildings and also in enhancing the comfort level of the buildings.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
Financial support from the U.S. Department of Energy is gratefully acknowledged.
References
Al-Homoud, M. (1997). “Optimum thermal design of office buildings.” Int. J. Energy Res., 21, 941–957.
Al-Hammad, M., Abderrahman, M., Grondzik, W., and Hawari, A. (1994). “A comparison between actual and published K-values for Saudi insulation materials.” J. Therm. Insulat. Buldg. Envel., 17(3), 378–385.
ASHRAE/IESNA. (1999). “Energy standard for buildings except low-rise residential buildings.” American Society of Heating, Refrigerating, and Air Conditioning Engineers, Atlanta, Ga. 90.1.
Battles, S. (2000). “Changes in energy usage in residential housing units.” http://www.eia.doe.gov/emeu/recs/recs97/decade (Feb. 5, 2005).
Budaiwi, I., Abdou, A., and Al-Homoud, M. (2002). “Variations of thermal conductivity of insulation materials under different operating temperatures: Impact on envelop-induced cooling load.” J. Archit. Eng., 8(4), 125–132.
Burberry, P. (1978). Building for energy conservation. Architectural Press, London, 3–17.
Burch, D. M., Johns, W. L., Jacobsen, T., Walton, G., and Reeve, C. P. (1984). “The effect of thermal mass on night temperature setback savings.” ASHRAE Trans., 90(2), 184–206.
Genaro, C., and Rafael, A. (2004). “Copper based thin films to improve glazing for energy-savings in buildings.” Sol. Energy, 76(1–3), 111–115.
Goodwin, S. E. (1980). “Concrete energy conservation guidelines.” Publication EB083.01B, Portland Cement Association, 32–44.
Madu, R. M. (1983). “Low cost sandcrete blocks using sawdust.” Proc., Symp. Appropriate Building Materials for Low Cost Housing, 138–151.
Meckler, M. (1981). Energy conservation in buildings and industrial plants. McGraw-Hill, New York, 1–22.
O’Callaghan, P. W. (1978). Building for energy conservation, Pergamon, Tarrytown, N.Y., 82–95.
Penttala, V. (1997). “Concrete and sustainable development.” ACI Mater. J., 94(5), 409–416.
Radcliffe, V. (1980). “Materials, energy and economic growth.” Materials Aspects of World Energy Needs, National Academy of Science, Washington, D.C., 68–97.
Sprecher, P., and Tillenkamp, F. (1991). “Energy saving systems in building technology based on concrete-core-cooling.” Concrete, 11(2), 29–34.
Zollo, R., and Hays, C. (1994). “A habitat of fiber reinforced concrete.” Concr. Int., 16(6), 23–26.
Information & Authors
Information
Published In
Copyright
© 2005 ASCE.
History
Received: May 25, 2004
Accepted: Mar 22, 2005
Published online: Dec 1, 2005
Published in print: Dec 2005
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.