Energy and Greenhouse Gas Emissions Trade-Offs of Recycled Concrete Aggregate Use in Nonstructural Concrete: A North American Case Study
Publication: Journal of Infrastructure Systems
Volume 15, Issue 4
Abstract
The retirement of aging concrete infrastructure is resulting in significant material flows of concrete debris in the economy. A proposed outlet for this debris is new concrete: the debris can be crushed into small particles and used in place of virgin aggregate. This form of recycling lessens use of aggregate resources, but its consequences are less clear in terms of energy use and greenhouse gas emissions. To examine these impacts, we develop life-cycle inventory models of the manufacturing of recycled concrete aggregate from debris. Results from these models are then used in life-cycle models of nonstructural concretes containing varying proportions of recycled concrete aggregate. For scenarios in which virgin and recycled aggregates are locally available, only 20% recycled aggregate substitution is beneficial. This corresponds to a modest reduction in energy use and greenhouse gas emissions: up to and 1.20 kg of concrete, respectively. Only when virgin aggregate must be transported large distances are higher levels of substitution beneficial, in terms of the metrics studied.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
We thank the Natural Sciences and Engineering Research Council of Canada (NSERC).
References
Argonne National Laboratory. (2005). Greenhouse gases, regulated emissions, and energy use in transportation (GREET) model 1.6, Argonne, Ill.
Bateman, A. (2001). “Three recycling operations boost Toronto-area aggregate supply.” Aggregates & Roadbuilding Magazine.
Bateman, A. (2004). “Smart crushing plant promises high capacity, product quality.” Aggregates & Roadbuilding Magazine.
Beachey, J. E. (1998). “Characterization of building-related construction and demolition debris in the United States.” Rep. No. 530-R-98-010, U.S. EPA, Washington, D.C.
Blaisdell, J. S. (2006). “A fines challenge.” Construction & demolition recycler, 229.
Craighill, A., and Powell, J. C. (1999). “A lifecycle assessment and evaluation of construction and demolition waste.” Rep. No. WM-1999-03, Centre for Social and Economic Research on the Global Environment, Norwich, U.K.
Fraaij, A. L. A., Pietersen, H. S., and de Vries, J. (2002). “Performance of concrete with recycled aggregates.” Proc., 5th Triennial Int. Conf. on Challenges in Concrete Construction, Concrete Technology Unit, Univ. of Dundee, Dundee, Scotland, 187–198.
Gill, C. B. (1991). Materials beneficiation, Springer, New York.
Hansen, T. C. (1986). “Recycled aggregates and recycled aggregate concrete—Second state-of-the-art report: Developments 1945–1985.” Mater. Struct., 19(111), 201–246.
Horvath, A. (2004). “Construction materials and the environment.” Annu. Rev. Environ. Resour., 29, 181–204.
ISO. (2006). “Environmental management-life cycle assessment-principles and framework.” Rep. No. ISO 14040, Int. Organization for Standardization, Geneva, Switzerland.
Kelly, T. (1998). “Crushed cement concrete substitution for construction aggregates—A materials flow analysis.” Rep. No. 1177, USGS, Washington, D.C.
Lamond, J. F., et al. (2002). “Removal and reuse of hardened concrete.” ACI Mater. J., 99(3), 300–325.
Lauritzen, E. K. (2004). “Recycling concrete—An overview of development and challenges.” Proc., RILEM Proc. PRO 40—Use of Recycled Materials in Buildings and Structures, RILEM, Bagneux, France, 297–305.
Limbachiya, M. C. (2004). “Coarse recycled aggregates for use in new concrete.” Proc. Institute of Civil Engineers: Engineering Sustainability, 157(2), 99–106.
Limbachiya, M. C., Leelawat, T., and Dhir, R. K. (2000). “Use of recycled concrete aggregate in high-strength concrete.” Mater. Struct., 33, 574–580.
Neville, A. M. (1995). Properties of concrete, Longman, London.
Nisbet, M. A., Marceau, M. L., and VanGeem, M. G. (2002). “Environmental life cycle inventory of portland cement concrete.” Rep. No. 2137a, Portland Cement Association, Skokie, Ill.
NRCan. (2007). GHGenius 3.9b, Natural Resources Canada, Ottawa, Canada.
PCA. (2005). An engineer’s guide to: Building green with concrete, Portland Cement Association, Skokie, Ill.
Stripple, H. (2001). “Life cycle assessment of road.” Rep. No. B 1210 E, IVL Swedish Environmental Research Institute, Gothenburg, Sweden.
U.S. DOE. (2002). “Limestone and crushed rock.” Energy and environmental profile of the U.S. mining industry, U.S. DOE, Washington, D.C., 9-1–9-12.
U.S. EPA. (1996a). “3.4-large stationary diesel and all stationary dual-fuel engines.” Compilation of air pollution emissions factors (AP 42), U.S. EPA, Washington, D.C., 1–11.
U.S. EPA. (1996b). “3.3-gasoline and diesel industrial engines.” Compilation of air pollution emissions factors (AP 42), U.S. EPA, Washington, D.C., 1–9.
U.S. EPA. (2003). “Background document for life-cycle greenhouse gas emission factors for clay brick reuse and concrete recycling.” Rep. No. 530-R-03-017, U.S. EPA, Washington, D.C.
U.S. EPA. (2005). NONROAD2005, U.S. EPA, Washington, D.C.
Van Oss, H. G., and Padovani, A. C. (2002). “Cement manufacture and the environment. Part I: Chemistry and technology.” J. Ind. Ecol., 6(1), 89–105.
Van Oss, H. G., and Padovani, A. C. (2003). “Cement manufacture and the environment. Part II: Environmental challenges and opportunities.” J. Ind. Ecol., 7(1), 93–126.
Vieira, P. S., and Horvath, A. (2008). “Assessing the end-of-life impacts of buildings.” Environ. Sci. Technol., 42(13), 4663–4669.
Wilburn, D. R., and Goonan, T. G. (1998). “Economic assessments for construction applications—A materials flow analysis.” Rep. No. 1176, USGS, Denver.
Willett, J. C. (2006). “Crushed stone.” Minerals yearbook: Vol I.—Metals and minerals, USGS, Reston, Va.
Worrell, E., Price, L., Martin, N., Hendriks, C., and Meida, L. M. (2001). “Carbon dioxide emissions from the global cement industry.” Annu. Rev. Environ. Resour., 26, 303–329.
Information & Authors
Information
Published In
Copyright
© 2009 ASCE.
History
Received: Jan 3, 2008
Accepted: Jan 11, 2009
Published online: Nov 13, 2009
Published in print: Dec 2009
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.