Design Aspects on Steel Fiber-Reinforced Concrete Pavements
Publication: Journal of Materials in Civil Engineering
Volume 20, Issue 9
Abstract
A numerical study on the fracture behavior of steel fiber-reinforced concrete (SFRC) slabs on grade for industrial pavements is presented. Finite element analyses have been carried out by using a commercial finite element code where user subroutines based on nonlinear fracture mechanics have been implemented to describe the progressive cracking behavior of SFRC. The model is capable of simulating both primary and secondary cracks when they occur in concrete and it has been validated by comparing numerical predictions with experimental observations of full-scale tests on slabs on elastic subgrade under point loads in different positions. A real pavement with contraction or construction joints has been numerically simulated to investigate the stress and the strain fields for the most significant positions of point loads.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers wish to express their gratitude and sincere appreciation to the Ministry of University and Research (MIUR) for partially financing this research work. The research project was also supported by Officine Maccaferri S.p.A. (Bologna, Italy). A special acknowledgement goes to Ms. Eng. Andrea Di Marco for his assistance in performing the numerical analyses.
References
American Concrete Institute (ACI). (1988). “Design consideration for steel fiber reinforced concrete.” SP-182 1988, ACI Committee 544, American Concrete Institute, Farmington Hills, Mich.
ASTM. (2002). “Standard test method for flexural toughness of fiber-reinforced concrete (using centrally loaded round panel).” ASTM C 1550, West Conshohocken, Pa.
ASTM. (2006). “Standard test method for flexural performance of fiber-reinforced concrete (using beam with third-point loading).” ASTM C1609/C1609M-06, West Conshohocken, Pa.
Balugaru, P., and Shah, S. P. (1992). “Fiber reinforced cement.” Composites, McGraw-Hill, New York.
Bazant, Z. P., and Gambarova, P. (1980). “Rough cracks in reinforced concrete.” J. Struct. Div., 106(4), 819–842.
Belletti, B., Bernardi, P., Cerioni, R., and Iori, I. (2003). “On a fibre-reinforced-concrete constitutive model for NLFE analysis.” Studies and Researches Politecnico di Milano, 24, 23–50.
Belletti, B., Cerioni, R., and Iori, I. (2001). “A physical approach for reinforced concrete (PARC) membrane elements.” J. Struct. Eng., 127(12), 1412–1426.
Belletti, B., Cerioni, R., Meda, A., and Plizzari, G. A. (2004). “Experimental and numerical analyses of FRC slabs on grade.” Proc., FRAMCOS5 Conf., Vail, Colo., 973–980.
CEN. (2004). “Testing sprayed concrete—Part 5: Determination of energy absorption capacity of fibre reinforced slab specimens.” EN 14488-5-CEN/TC, 104, CEN, Brussels, 1–7.
CEN. (2006). “Precast concrete products—Test method for metallic fibre concrete—Measuring the flexural tensile strength.” EN 14651-5, CEN, Brussels, 15.
CNR. (2007). “Guidelines for the design, construction, and production control of fibre reinforced concrete structures.” DT 204, National Research Council of Italy.
The Concrete Society. (2003). “Concrete industrial ground floors. A guide to design and construction.” Tech. Rep. No. 34, 3rd Ed.
Darwin, D., and Pecknold, D. A. (1977). “Non-linear biaxial stress-strain law for concrete.” J. Engrg. Mech. Div., 103(2), 229–241.
De Borst, R., and Nauta, P. (1985). “Non-orthogonal cracks in a smeared finite element model.” Eng. Comput., 2(2), 35–46.
di Prisco, M., and Felicetti, R. (1999). “HSC thin-web roof-elements: An experimental investigation on steel fibre benefits.” Proc., 5th Int. Symp. Utilization of HS/HP Concrete, Sandefjord, Norway, 546–555.
di Prisco, R., Felicetti, R., and Plizzari, G. A., Eds. (2004). Proc. 6th RILEM Symp. on Fibre Reinforced Concretes (FRC), RILEM PRO, 39, Varenna, Italy.
di Prisco, M., and Plizzari, G. A. (2004). “Precast SFRC elements: From material properties to structural applications.” Proc., BEFIB 2004, RILEM PRO 39, Varenna, Italy.
Falkner, H., Huang, Z., and Teutsch, M. (1995). “Comparative study of plain and steel fiber reinforced concrete ground slabs.” Concr. Int., 17(1), 45–51.
Gambarova, P. (1983). “On the shear transfer in cracked r.c. bidimensional elements.” Proc., AICAP Conf., AICAP, 141–156, Bari, Italy (in Italian).
Gelfi, P., Giuriani, E., and Marini, A. (2002). “Stud shear connection design for composite concrete slab and wood beams.” J. Struct. Eng., 128(12), 1544–1550.
Hillerborg, A., Modèer, M., and Petersson, P. E. (1976). “Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements.” Cem. Concr. Res., 6, 773–782.
Kupfer, H., Hilsdorf, H. K., and Rusch, H. (1969). “Behavior of concrete under biaxial stresses.” ACI J., 66(8), 656–666.
JCI. (1984). “Method of tests for flexural strength and flexural toughness of fiber reinforced concrete.” JCI standard SF4, Japan Concrete Institute, 45–51.
Johansen, K. W. (1949). “Theory of timber connections.” Int. Assoc. Bridge Struct. Engng., 9, 249–262.
Johansen, K. W. (1962). Yield line theory, William Clowes & Sons, Ltd., London.
Li, V., Stang, H., and Krenchel, H. (1993). “Micromechanics of crack bridging in fiber—Reinforced concrete.” Mater. Struct., 26, 486–494.
Meda, A. (2003). “On the extension of the yield-line method to the design of SFRC slabs on grade.” Studies and researches, Politecnico di Milano, 24, 223–239.
Meda, A., and Plizari, G. A. (2004). “New design approach for steel fiber-reinforced concrete slabs-on-ground based on fracture mechanics.” ACI Struct. J., 101(3), 298–303.
Naaman, A. E., and Reinhardt, H. W., eds. (2003). “High performance fibre reinforced cement composites—HPFRCC4.” Proc., RILEM PRO, Ann Arbor, Mich.
Riggs, H. R., and Powell, G. H. (1986). “Rough crack model for analysis of concrete.” J. Eng. Mech., 112(5), 448–464.
RILEM. (2000). “TC 162 TDF. Part 1: Test and design method for steel fiber reinforced concrete—Recommendations: Part 2: method.” Mater. Struct., 33, 75–81.
Rots, J. G., and Blaauwendraad, J. (1989). “Crack models for concrete: Discrete or smeared? Fixed, multidirectional, or rotating?” Heron, 34(1), 1–59.
Sorelli, L., Meda, A., Plizzari, G. A., and Rossi, B. (2004). “Experimental investigation on slabs on grade: Steel fibers vs. conventional reinforcement.” Proc., BEFIB 2004 Conf., Varenna, Italy.
Sorelli, L., Meda, A., and Plizzari, G. A. (2006). “Steel fiber concrete slabs on ground: A structural matter.” ACI Struct. J., 103(4), 551–558.
UNI. (2003). “Steel fibre reinforced concrete—Part I: Definitions, classification specification and conformity. Part II: Test method for measuring first crack strength and ductility indexes.” Italian Board for Standardization.
Vecchio, F. J., and Collins, M. P. (1993). “Compression response of cracked reinforced concrete.” J. Struct. Eng., 119(12), 3590–3610.
Westergaard, H. M. (1926). “Stresses in concrete pavements computed by theoretical analysis.” Mem. Fac. Sci., Kyoto Univ., Ser. Phys., Astrophys., Geophys. Chem, 7(2), 25–35.
Information & Authors
Information
Published In
Copyright
© 2008 ASCE.
History
Received: Aug 13, 2007
Accepted: Jan 28, 2008
Published online: Sep 1, 2008
Published in print: Sep 2008
Notes
Note. Associate Editor: Nemkumar Banthia
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.