Effects of Constituent Materials and Quantities on Water Demand and Compressive Strength of Controlled Low-Strength Material
Publication: Journal of Materials in Civil Engineering
Volume 14, Issue 6
Abstract
Controlled low-strength material (CLSM) is a self-compacting, flowable, low-strength, cementitious material used primarily as backfill, void fill, and utility bedding in lieu of conventional compacted fill. Potential advantages of CLSM include decreased labor requirements, faster construction speed, and potentially lower in-place cost. When considering CLSM as a construction material, two of the most important properties include flowability and compressive strength. The flowability of CLSM can directly impact productivity and human resource requirements for placing the material. Lower flowability may require more resources. In addition, compressive strength values are required as an indicator for performance and long-term excavatability. Minimum strength requirements are necessary for performance criteria, and maximum strength requirements are necessary for long-term excavation. This research investigated the effects of material properties on the water demand necessary to obtain minimum flowability values and a range of compressive strength values for CLSM. Three types of aggregate, three types of fly ash, and one Type I cement were used in this study. A total of 31 mixtures were developed and tested. The use of different aggregate types and sources was found to be the most significant factor affecting water demand in this investigation. Water-cement ratio, aggregate sources, and fly ash type were influencing variables on the compressive strength of CLSM. Formulas were developed to predict the compressive strength development of CLSM for the materials used in this research program.
Get full access to this article
View all available purchase options and get full access to this article.
References
Adaska, W. S.(1997). “Controlled low strength materials.” Concr. Int., 19(4), 41–43.
American Concrete Institute (ACI) Committee 229. (1994). “Controlled low-strength amterials (CLSM).” Rep. ACI 229R-94, Detroit.
Atkinson, A. C., and Donev, A. N. (1992). Optimum experimental designs, Oxford University Press, New York.
Bhat, S. T. (1996). “Use of coal combustion residues and foundry sands in flowable fill.” PhD dissertation, Purdue Univ., West Lafayette, Ind.
Bhat, S. T., and Lovell, C. W. (1996). “Design of flowable fill: Waste foundry sand as a fine aggregate.” Transportation Research Record 1546, Transportation Research Board, Washington, D.C., 70–78.
Folliard, K. J., Trejo, D., Sabol, S. A., and Du., L. (1999). “Controlled low-strength material for backfill, utility bedding, void fill and bridge approaches.” National Cooperative Highway Research Program (NCHRP) 24-12 Phase I Interim Rep.
Funston, J. J., Krell, W. C., and Zimmer, F. V.(1984). “Flowable fly ash: A new cement stabilized backfill.” Civil Engineering, 54(3), 48–51.
Gaynor, R. D., and Meininger, R. C.(1983). “Evaluate concrete sands.” Concr. Int., 5(12), 53–60.
Hamilton County and the City of Cincinnati. (1996). “A performance specification for controlled low strength material, controlled density fill (CLSM-CDF).” Rep.
Larsen, R. L.(1988). “Use of controlled low strength materials in Iowa.” Concr. Int., 10(7), 22–23.
Wheeler, B. (1998). Reference manual: Software for the design of experiments, ECHIP, Inc., Hockessin, Del.
Information & Authors
Information
Published In
Copyright
Copyright © 2002 American Society of Civil Engineers.
History
Received: Jan 30, 2001
Accepted: Oct 1, 2001
Published online: Nov 15, 2002
Published in print: Dec 2002
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.