Characterization and Chemical Stabilization of Al-Qurayyah Sabkha Soil
Publication: Journal of Materials in Civil Engineering
Volume 14, Issue 6
Abstract
Sabkha soils are known for their low-bearing strength in their natural condition. Moreover, the collapse potential of sabkhas presents an unacceptable risk in normal practice and calls for the improvement of their mechanical properties prior to any construction. A review of the literature indicates that research on the stabilization of sabkha is scanty despite the extensive distribution of sabkha soils worldwide. Moreover, since the sabkha is a highly variable material, there is a need to formulate a “data bank” by stabilizing as many sabkhas as possible. In this study, a “selected” sabkha soil from Al-Qurayyah, eastern Saudi Arabia, was researched for improving its properties using cement and lime at five different dosages ranging from 0 to 10%. The load-bearing capability of plain and chemically stabilized sabkha mixtures was evaluated using the CBR, unconfined compressive strength, and Clegg impact value at different moisture contents. The results indicated that cement improved the performance of stabilized sabkha much more than lime, particularly at high moisture contents. Further, the 7% cement addition has satisfied the strength requirements so that sabkha soil can be used as a base course in rigid pavements and a subbase in flexible pavements.
Get full access to this article
View all available purchase options and get full access to this article.
References
Abduljauwad, S. N., Bayomy, F., Al-Shaikh, A. M., and Al-Amoudi, O. S. B.(1994). “Influence of geotextiles on performance of saline sabkha soils.” J. Geotech. Eng., 120(11), 1939–1960.
Al-Amoudi, O. S. B.(1994). “Chemical stabilization of sabkha at high moisture contents.” Eng. Geol., 36(3/4), 279–291.
Al-Amoudi, O. S. B.(1995a). “A review of the geotechnical and constructional problems in sabkha environments and methods of treatment.” Arabian J. Sci. Eng., 20(3), 405–432.
Al-Amoudi, O. S. B. (1995b). “Soil stabilization and durability of reinforced concrete in sabkha environments.” Proc., 4th Saudi Engineering Conf., Vol. II, King Abdulaziz Univ., Jeddah, Saudi Arabia, 313–338.
Al-Amoudi, O. S. B., and Abduljauwad, S. N.(1994). “Suggested modifications to ASTM standards when testing arid, saline soils.” ASTM Geotech. Test. J., 17(2), 243–253.
Al-Amoudi, O. S. B., Abduljauwad, S. N., El-Naggar, Z. R., and Rasheeduzzafar.(1992). “Response of sabkha to laboratory tests: A case study.” Eng. Geol., 33(2), 111–125.
Al-Amoudi, O. S. B., Aiban, S. A., and Al-Abdul Wahhab, H. I. (1997). “Variability and characteristics of eastern Saudi sabkha soils.” Proc., 14th Int. Conf. on Soil Mechanics and Foundation Engineering, Balkema, Rotterdam, The Netherlands, 17–20.
Al-Amoudi, O. S. B., Asi, I. M., Al-Abdul Wahhab, H. I., and Khan, Z. (2002). “On the Clegg hammer-CBR correlations.” J. Mater. Civ. Eng., in press.
Al-Amoudi, O. S. B., Asi, I. M., and El-Naggar, Z. R.(1995). “Stabilization of an arid saline soil using additives.” Q. J. Eng. Geol., 28, 369–379.
Al-Ayedi, E. S. (1996). “Chemical stabilization of Al-Qurayyah eastern Saudi sabkha soil.” Master’s of Engineering Rep., Dept. of Civil Engineering, King Fahd Univ. of Petroleum and Minerals, Dhahran, Saudi Arabia.
Al-Guwaizani, A. S. (1994). “Sedimentology and geochemistry of Qurayyah sabkha, eastern Saudi Arabia.” MS thesis, Dept. of Earth Sciences, King Fahd Univ. of Petroleum and Minerals, Dhahran, Saudi Arabia.
American Concrete Institute (ACI) Committee 230. (1990). “State-of-the-art report on soil cement.” ACI Mater. J., 87(4), 395–417.
Ellis, G. I. (1973). “Arabian salt-bearing soil (sabkha) as an engineering material.” TRRL Rep. 523, Transport and Road Research Laboratory, Dept. of the Environment, UC, Crowthorne, Berkshire, U.K.
Fookes, P. G., and Collis, L.(1975). “Problems in the Middle East.” Concrete, 9(7), 12–17.
Montgomery, D. C. (1984). Design and analysis of experiments, 2nd Ed., Wiley, New York.
Russell, R. B. C. (1974). “Chemical and physical properties of sabkha-type materials.” TRRL Supplementary Rep. 79, Transport and Road Research Laboratory, Dept. of the Environment, UC, Crowthorne, Berkshire, U.K.
Information & Authors
Information
Published In
Journal of Materials in Civil Engineering
Volume 14 • Issue 6 • December 2002
Pages: 478 - 484
Copyright
Copyright © 2002 American Society of Civil Engineers.
History
Received: Mar 9, 2001
Accepted: Jul 27, 2001
Published online: Nov 15, 2002
Published in print: Dec 2002
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.