Shear Tests of Steel Plates Epoxy-Bonded to Concrete under Temperature
Publication: Journal of Materials in Civil Engineering
Volume 12, Issue 1
Abstract
One of the methods used to increase the bending and shear resistance of concrete structural elements consists of the addition of steel plates, which are bonded to the original concrete element with epoxy resin. The resulting bonds behave well under the structure's normal load conditions. Nevertheless, because the bonding material used in this method is an organic compound, its strength is sensitive to an increase in temperature and may fail in the event of a fire. In this work, the behavior of the different types of concrete bonded to steel plates by epoxy resin is studied under conditions of elevated temperature and shear loading.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
“Aceros de Construcción en General. Prescripciones de Calidad.” (1970). DIN 17100, Manual DIN 4 Parte A—Normas de Materiales y perfiles. Acero y hierro, 4 edición española de la 21 alemana, Editorial Balzola-Bilbao, España (in Spanish).
2.
Ang, T. ( 1979). “The strengthening of reinforced concrete beams using glued steel plates,” M.Engrg. dissertation, University of Sheffield, Sheffield, England.
3.
Appleton, J., Almeida, J., and Appleton, J. ( 1985). “Reparação e Reforço de Estruturas de Betão Armado,” First ENCORE—Encontro sobre Conservação e Reabilitação de Edifícios de Habitação, Laboratório Nacional de Engenharia Civil, Lisboa, Portugal, 1–21 (in Portuguese).
4.
“Betão. Ensaio de Compressão, Especificação.” (1968). E-226, Laboratório Nacional de Engenharia Civil, Lisboa, Portugal (in Portuguese).
5.
Branco, F. J. F. G. ( 1998). “Influência da Temperatura na Fixação de Chapas de Aço a Betão,” MS thesis, Dept. of Civ. Engrg. Facu. of Sci. and Technol., University of Coimbra, Portugal (in Portuguese).
6.
Bresson, J. (1971). “Nouvelles Recherches et Applications Concernant L'Utilisation des Collages dans les Structures. Béton Plaqué.” Proc., L'Institut Technique du Bâtiment et des Travaux Publics, No. 278, Paris, 22–55 (in French).
7.
“British standard. Testing concrete. Method for determination of static modulus of elasticity in compression.” (1983). BS-1881: Part 121, Bristish Standards Institution, London.
8.
Correia, A. C. M. ( 1993). “Estudo Térmico e Envelhecimento Higrotérmico de um Adesivo de Epóxido. Comportamento Mecânico de Juntas Coladas,” MS thesis, Dept. of Mech. Engrg., Facu. of Sci. and Technol., University of Coimbra, Portugal (in Portuguese).
9.
Forge, R. ( 1977). “Contribution a L'Étude du Comportement au Feu des Colles Époxydes.” Proc., L'Institut Technique du Bâtiment et des Travaux Publics, Vol. 349, Paris, 83–85 (in French).
10.
Grelu, H. ( 1977). “Utilisation des Résines Époxy dans le Tunnel de Saint-Cloud (A13).” Proc., L'Institut Technique du Bâtiment et des Travaux Publics, Vol. 349, Paris, 62–64 (in French).
11.
Isnard, A., and Thomasson, C. ( 1977). “Deux Exemples de Renforcement de Structure Par Aciers Laminaires Collés.” Proc., L'Institut Technique du Bâtiment et des Travaux Publics, Vol. 349, Paris, 64–69 (in French).
12.
L'Hermite, R. ( 1967). “L'Application des Colles et Resins dans la Construction. Le Beton a Coffrage Portant.” Proc., L'Institut Technique du Bâtiment et des Travaux Publics, No. 239, Paris, 65–73 (in French).
13.
L'Hermite, R. ( 1977). “Le Renforcement du Béton par Résines—Renforcement des Ouvrages en Béton et en Maçonnerie par Collage.” Proc., L'Institut Technique du Bâtiment et des Travaux Publics, No. 349, Paris, 19–23 (in French).
14.
L'Hermite, R., and Bresson, J. (1967). “Béton Armé D'Armatures Collées.” Proc., RILEM Int. Symp. on Synthetic Resins in Build. Constr., RILEM—Réunion Internationale des Laboratoires D'Essais et de Recherches sur les Matériaux et les Constructions, Paris, 175–203 (in French).
15.
Lucas, T. ( 1977). “La Protection des Bétons Plaqués contre L'Incendie.” Proc., L'Institut Technique du Bâtiment et des Travaux Publics, No. 349, Paris, 86–97 (in French).
16.
Muravljov, M., and Krasulja, M. (1994). “Physical and numerical models for the shear load-carrying capacity testing of steel-concrete bonded joints.” Mat. and Struct., Paris, 27(165), 40–53.
17.
Rodrigues, C. M. C. ( 1993). “Comportamento de Ligação Aço-ResinaBetão em Elementos Estruturais,” MS thesis, Instituto Superior Técnico—Universidade Técnica de Lisboa, Lisboa, Portugal (in Portuguese).
18.
Salman, H. ( 1992). “Temperature effects on the bond of resin anchored reinforcement,” MS dissertation, Dept. of Civ. and Struct. Engrg., University of Sheffield, Sheffield, England.
19.
Sevene, J. P. ( 1977). “Trois Exemples de Travaux de Réparation et de Renforcements d'Ouvrages.” Proc., L'Institut Technique du Bâtiment et des Travaux Publics, No. 349, Paris, 69–75 (in French).
20.
Theillout, J. N. ( 1983). “Renforcement et Réparation des Ouvrages d'Art par la Technique des Toles Collées,” PhD thesis, L'Ecole Nationale des Ponts et Chaussées, Paris, (in French).
21.
Van Gemert, D., and Bosch, M. V. (1986). “Long-term performance of epoxy bonded steel-concrete joints. Adhesion between polymers and concrete.” Proc., RILEM Int. Symp., Chapman & Hall, London, 518–527.
22.
Vidal, J. ( 1997a). “Renforcement du Pont Biais de L'Autoroute A 6 sur le Chemin Départamental 126. Ouvrage A 09.” Proc., L'Institut Technique du Bâtiment et des Travaux Publics, No. 349, Paris, 76–79 (in French).
23.
Vidal, J. ( 1977b). “Paramètres Devant Guider le Choix d'un Produit de Collage en Fonction du Problème à résoudre.” Proc., L'Institut Technique du Bâtiment et des Travaux Publics, No. 349, Paris, 80–83 (in French).
Information & Authors
Information
Published In
Journal of Materials in Civil Engineering
Volume 12 • Issue 1 • February 2000
Pages: 74 - 80
History
Received: Oct 14, 1998
Published online: Feb 1, 2000
Published in print: Feb 2000
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.