Compatibility and Rheological Study of ASR Asphalt Binder
Publication: Journal of Materials in Civil Engineering
Volume 10, Issue 1
Abstract
When junk automobiles are shredded to recover the ferrous and nonferrous metals for recycling, a large quantity of nonmetallic residue, commonly called automotive shredder residue (ASR), is generated. Because ASR mostly contains plastic and rubber related materials, and the addition of plastic and scrap rubber from waste tires as a road material has been proven to be effective in solving existing pavement related problems, attempts were made to examine the feasibility of ASR as a road material additive. As a part of this effort, compatibility, rheological, and leaching properties of ASR modified asphalt were studied. The photomicrographs and Tg of ASR modified asphalt demonstrated some compatibility between ASR and asphalt. Dynamic mechanical analysis indicated that rutting and aging properties of asphalt should improve with the addition of ASR. The toxicity characteristics leaching procedure test indicated that leaching levels of various metals from ASR modified asphalt were well below the Environmental Protection Agency regulatory level.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
“Aging: Binder validation.” (1993). Strategic Hwy. Res. Program (SHRP) Publ. A-384, Washington, D.C.
2.
Bouldin, M. G., Collins, J. H., and Berker, A. (1991). “Rheology and microstructure of polymer/asphalt blend.”Rubber Chem. and Technol., 64(2).
3.
Braslaw, J., et al. (1991). “Hydrocarbon generation during the inert gas pyrolysis of automobile shredder waste.”Thermochimica Acta, 186.
4.
Dawson, L. (1993). “EPA asks: Can better roads be built using plastic?”The Clearing House MMPI Publ., 4(1).
5.
Dutta, U., and Bhowmik, P. (1993). “An overview of tire-based asphalt pavement mixture technology.”J. Envir. Engrg. and Mgmt.
6.
Goodrich, L. J. (1988). “Asphalt and polymer modified asphalt properties related to the performance of asphalt concrete mix.” Assn. of Asphalt Pavement Technologists (AAPT), 57.
7.
Jody, B. J., and Daniels, E. J. (1991). “Automobile shredder residue: Treatment options.”J. Haz. Waste and Haz. Mat., 8(3).
8.
NCAT. (1989). “Investigation and evaluation of ground tire rubber in hot mix asphalt.” Auburn Univ., Auburn, Ala.
9.
“Rheological properties of asphalt and their effects on the mixture properties and pavement performance.” (1994). ASTM Spec. Tech. Publ. No. 941, ASTM, West Conshohocken, Pa.
10.
Sendijarevic, V., et al. (1995). “Recycling of automotive shredder residue using isocyanate-based binders.”Paper Presented at SPI Meeting.
11.
Sendijarevic, V., et al. (1997). “Recent developments in shredder downstream separation process and recycling options for automotive shredder residue.”SAE Tech. Ser. 970663.
12.
“SUPERPAVE: Performance graded asphalt binder specification and testing.” (1994). Superpave Ser. No. 1(SP-1), Asphalt Inst., Lexington, Ky.
13.
Tappeiner, W., and Male, A. G. (1993). “Enhancement of asphalt concrete mixtures through the addition of recycled polyethylene.”ANTEC.
Information & Authors
Information
Published In
Copyright
Copyright © 1998 American Society of Civil Engineers.
History
Published online: Feb 1, 1998
Published in print: Feb 1998
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.