Acoustic-Emission Kaiser Effect in Fly-Ash Cement Mortar under Compression
Publication: Journal of Materials in Civil Engineering
Volume 7, Issue 4
Abstract
Acoustic-emission (AE) technology is considered a potential new testing method to monitor the integrity of concrete materials. This study is devoted to the investigation of the AE Kaiser effect in fly-ash cement mortar (FACM) under uniaxial compression. The major experimental parameters include the amount of cement replaced by fly ash, curing time, compressive strain and stress, loading pattern, and loading rate. The test results showed that the AE Kaiser effect existed in FACM specimens up to 80% of its ultimate strength. Good correlation between the variation of the AE signals and the compressive strains was observed. In addition, the results indicated that the AE Kaiser effect existed in FACM specimen during different curing periods of three, seven, 14, and 28 days. These observations suggested that the AE Kaiser effect has good potential to be used as a new tool to monitor the loading history of concrete materials.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Alliche, A., and Francois, D. (1986). “Fatigue behavior of hardened cement paste.”Cement and Concrete Res., Vol. 16, 199–206.
2.
Kaiser, J. (1953). “Untersuchungen uber das auftreten geraucchen beim zuvgersuch,” PhD thesis, Technische Hochschule, Munich, German (in German).
3.
Li, L., and Poorooshasb, H. B. (1986). “Characteristics of acoustic emission from reinforced concrete.”Progress in Acoustic Emission III, Japanese Soc. of NDI, 522–528.
4.
Lim, M. K., and Koo, T. K. (1989). “Acoustic emission from reinforced concrete beams.”Mag. Concrete Res., Vol. 149, 229–234.
5.
Malhotra, V. M., and Carino, N. J. (1991). CRC handbook on nondestructive testing of concrete, 1st Ed., CRC Press, Inc., Boca Raton, Fla.
6.
Matthews, J. R. (1983). Acoustic emission, 1st Ed., Gordon and Breach Science Publishers, New York, N.Y.
7.
McCabe, W. M., Koerner, R. M., and Lord, A. E.(1976). “Acoustic emission behavior of concrete laboratory specimens.”ACI J., 73(7), 367–371.
8.
Mehta, P. K. (1983). “Pozzolanic and cementitious by products as mineral admixtures for concrete—a critical review.”Fly Ash, Silica Fume, Slag & Other Mineral By-Products in Concrete, Vol. I, ACI SP-79, Am. Concrete Inst. (ACI), Detroit, Mich., 1–46.
9.
Miller, R. K., and McIntire, P. (1987). Nondestructive testing handbook volume 5: acoustic emission testing, 1st Ed., Am. Soc. for Nondestructive Testing, Inc.
10.
Nichols, R. W. (1976). Acoustic emission, 1st Ed., Applied Science Publishers, New York, N.Y.
11.
Nielsen, J., and Griffin, D. F.(1977). “Acoustic emission of plain concrete.”J. Testing and Evaluation, 5(6), 476–483.
12.
Niiseki, S., Satake, M., Hujita, M., and Mouri, I. (1986). “Fundamental research for evaluating applied stress levels in concrete structures through AE testing.”Progress in Acoustic Emission III, Japanese Soc. of NDI, 546–553.
13.
Ohtsu, M.(1987). “Acoustic emission characteristics in concrete and diagnostic applications.”J. Acoustic Emission, 6(2), 99–108.
14.
Robert, L. D., and Fredrik, P. G. (1990). “Fly ash and coal conversion by-products: characterization, utilization and disposal VI.”Proc., Mat. Res. Soc. Symp., Vol. 178, 1st Ed., Mat. Res. Soc., Pa.
15.
Robinson, G. S. (1965). “Methods of detecting the formation and propagation of microcracks in concrete.”Proc., Int. Conf. on the Struct. of Concrete and Its Behavior Under Load, 131–145.
16.
Rossi, P., Robert, J. L., Gervais, J. P., and Bruhat, D.(1989). “Identification of physical mechanisms underlying acoustic emission during the cracking of concrete.”Mat. and Struct., 22(129), 194–198.
17.
“Standard test method for compressive strength of hydraulic cement mortars.” (1986). ASTM C109-86, 1987 annual book of ASTM standards, Vol. 04.01, ASTM, Philadelphia, Pa., 74–79.
18.
Uomoto, T.(1987). “Application of acoustic emission to the field of concrete engineering.”J. Acoustic Emission, 6(3), 137–144.
19.
Weng, C. C., Tam, M. T., and Lin, G. C.(1992). “Acoustic emission characteristics of mortar under compression.”Cement and Concrete Res., 22(4), 641–652.
Information & Authors
Information
Published In
Copyright
Copyright © 1995 American Society of Civil Engineers.
History
Published online: Nov 1, 1995
Published in print: Nov 1995
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.