Local Buckling of FRP Beams and Columns
Publication: Journal of Materials in Civil Engineering
Volume 5, Issue 3
Abstract
Fiber‐reinforced plastic (FRP) structural members with open or closed thin‐walled sections are being used as beams and columns for structural applications where buckling is the main consideration in the design. Analytical models for several local buckling modes under axial and shear loading, taking the flange‐web interaction into account, are developed. Experimental data correlating predicted and observed behavior are presented for some commercially available structural shapes. Failure envelopes are developed for box‐ and I‐shape FRP columns and beams. The analytical models presented can be used to predict the behavior of any new pultruted material. The Rayleigh‐Ritz method is used in this work to analyze anisotropic flanges of box and I‐beams. The anisotropy of the material is introduced by ±45° angle‐ply layers introduced recently by pultruted manufacturers to improve the buckling strength of columns as suggested by this investigation.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Barbero, E. J. (1991). “Pultruted structural shapes—From the constituents to the structural behavior.” Sampe J., 27(1), 25–30.
2.
Barbero, E. J., and Raftoyiannis, I. (1990). “Buckling analysis of pultruded composite columns.” Impact and buckling of structures, AD Vol. 20, Am. Soc. of Mech. Engrs., New York, N.Y.
3.
Barbero, E. Y., Fu, S. H., and Raftoyiannis, I. (1991). “Ultimate bonding strength of composite materials.” J. Mater. in Civ. Engrg., ASCE, 3(4), 292–306.
4.
Birsa, R., and Taft, P. (1984). “Transverse strength for pultruted parts.” Mater. Engrg., 5, 63–64.
5.
Cheung, Y. K. (1976). Finite strip method in structural analysis. Pergamon, Oxford, England.
6.
Creative Pultrusions design manual. (1988). Creative Pultrusions Inc., Alum Bank, Pa.
7.
Galambos, T. V. (1988). Guide to stability design criteria for metal structures. 4th Ed., John Wiley & Sons, Inc., New York, N.Y.
8.
Holston, A. Jr. (1969). “Buckling of orthotropic plates with one free edge.” AIAA J., 8(7), 1352–1354.
9.
Jones, R. M. (1975). Mechanics of Composite Materials. Hemisphere, New York, N.Y.
10.
Lee, D. J. (1978). “The local buckling coefficient for orthotropic structural sections.” Aerosp. J., 82(575), 313–320.
11.
Leissa, A. W. (1987). “A review of laminated composite plate buckling.” Appl. Mech. Rev., 40(5), 75–590.
12.
Meirovich, L., and Kwak, M. K. (1990). “Convergence of the classical Rayleigh‐Ritz method and the finite element method.” AIAA J., 28(8), 1509–1516.
13.
Mikhlin, S. G., and Smolitskiy, K. L. (1967). Approximate methods for solution of differential and integral equations. Elsevier, New York, N.Y.
14.
Raftoyiannis, I. G. (1991). “Buckling of pultruted composite columns,” MSCE thesis, West Virginia University, Morgantown, W.V.
15.
Reddy, J. N. (1984). Energy and variational methods in applied mechanics. John Wiley & Sons, Inc., New York, N.Y.
16.
Reddy, J. N. (1986). Applied functional analysis and variational methods in engineering. McGraw‐Hill, New York, N.Y.
17.
Shuleshko, P. (1957). “Reduction method for buckling problems of orthotropic plates.” Aeronaut. Q., 8, 145–156.
18.
Vakiener, A. R., Zureick, A., and Will, K. M. (1991). “Prediction of local flange buckling in pultruted shapes by finite element analysis.” Advanced composite materials in civil engineering structures, (Proc. ASCE Specialty Conf.), S. L. Iyer, ed., ASCE, 303–309.
19.
Webber, J. P. H., Holt, P. J., and Lee, D. A. (1985). “Instability of carbon fibre reinforced flanges of I section beams and columns.” Composite Struct., 4, 245–265.
20.
Yuan, R. L., Hashen, Z., Green, A., and Bisarnsin, T. (1991). “Fiber‐reinforced plastic composite columns.” Advanced composite materials in civil engineering structures (Proc. ASCE Specialty Conf.), S. L. Iyer, ed., ASCE, 205–211.
Information & Authors
Information
Published In
Copyright
Copyright © 1993 American Society of Civil Engineers.
History
Received: Mar 3, 1992
Published online: Aug 1, 1993
Published in print: Aug 1993
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.