Prototype Robotic Masonry System
Publication: Journal of Aerospace Engineering
Volume 6, Issue 1
Abstract
The introduction of robots and automation technology to construction operations will require considerable efforts to understand the mechanics of the many tasks better as they relate to building structures. To control arms, grippers, nozzles, and other production devices automatically, the mechanics of tools as they interact and work with the different construction materials requires extensive knowledge. One approach to learn about the behavior of all the components of an automated system for construction is to build scaled prototypes that are able to handle the actual material. This paper describes the design of an automated masonry system for prefabricating brick panels. It discusses the conditions that affect the bond strength of the masonry. It then describes the design and development of a Cartesian robot actuator and scaled‐down mortar spreader system built to test the bond strengths and accuracy of robotically placed bricks. The actual fabrication of the partially functional prototype helped the researchers to gain hands‐on familiarity with the many real‐world obstacles in using automation and robotics in construction. However, the learning experience also included an appreciation of the potentials offered by using advanced technologies in construction.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Anliker, F. J. (1988). “Needs for robots and advanced machines at construction site. Social aspects of robotics.” 5th Int. Symp. Robotics in Construction, International Association for Automation and Robotics in Construction, 145–150.
2.
Bernold, L. E. (1987). “Automation and robotics in construction: A challenge and a chance for an industry in transition.” Int. J. Project Mgmt., 5(3), 155–160.
3.
Bernold, L. E. 91989). “Flexible construction systems (FCS).” Proc. 5th Int. Symp. Robotics in Construction, Tokyo, Japan, June, 381–390.
4.
Demsetz, L. (1989). “Task identification for construction automation.” Proc. 6th Int. Symp. Automation Robotics in Construction, San Francisco, Calif., 95–102.
5.
Eastman, R. M. (1989). Materials Handling. Marcel Dekker, Inc., New York, N.Y.
6.
“International competition in services, OTA‐ITE‐328.” (1987). U.S. Congress Office of Technology Assessment. U.S. Printing Office, Washington, D.C.
7.
Kangari, R., and Halpin, D. W. (1989). “Potential robotics utilization in construction.” J. Constr. Engrg. and Mgmt., ASCE, 115(1), 126–143.
8.
Lehtinen, H., Salo, E., and Aalto, H. (1989). “Outlines of two masonry robot system” Proc. 6th Int. Symp. Automation and Robotics in Construction, San Francisco, Calif., 143–150.
9.
Macropedia of the encyclopedia. (1981). 15th ed., Helen Hemingway Bentor Publishing, Chicago, Ill.
10.
Mehrotra, D. (1986). “Factors influencing mortar‐brick bonding.” Research Report, by Ceramic Engrg. Dept., Clemson Univ., S.C.
11.
Paulson, B. C. (1985). “Automation and robotics for construction.” J. Constr. Engrg. and Mgmt., ASCE, 111(3), 190–207.
12.
Robinson, G. C. (1986). “Influence of the type of mortar and air content on bond strength,” Special Report, Ceramic Engrg. Dept., Clemson Univ., Clemson, S.C.
13.
Slocum, A. H., and Schena, B. (1988). “Blockbot, a robot to automate construction of cement block walls.” Robotics, 4(4), 111–129.
14.
“Standard method for measurement of masonry flexural bond strength.” (1989). ASTM‐C 1072‐56, Annual Book of ASTM Standards, Vol. 04.05, ASTM, Philadelphia, Pa.
15.
“Standard specification for facing (solid masonry unit made from clay or shale).” (1989). ASTM‐C 216‐88, Annual Book of ASTM Standards, Vol. 04.05, ASTM, Philadelphia, Pa.
16.
Warnecke, H. J., and Steinhilper, R. (1985). Flexible manufacturing systems. Springer‐Verlag, New York, N.Y.
17.
Whittaker, W. L. (1985). “Cognitive robots for construction.” Annual Report, Robotics Inst., Carnegie‐Mellon Univ., Pittsburgh, Pa.
Information & Authors
Information
Published In
Journal of Aerospace Engineering
Volume 6 • Issue 1 • January 1993
Pages: 19 - 33
Copyright
Copyright © 1993 American Society of Civil Engineers.
History
Received: Aug 25, 1990
Published online: Jan 1, 1993
Published in print: Jan 1993
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.