Motion and Path Control for Robotic Excavation
Publication: Journal of Aerospace Engineering
Volume 6, Issue 1
Abstract
In a general sense, control can be described as a cyclic sequence of observing, planning, and executing new actions. Similar to the human body, robotic devices are being equipped with a wide variety of sensors for the purpose of acquiring the needed information for planning and replanning. Because of the harsh work environment, construction robots, such as autonomous excavators, depend on hardened and reliable sensory systems, thus limiting the choices for selecting sensors. For control purposes, the sensory data need to be evaluated for decision‐making purposes. The intelligence for this endeavor has to be based on a thorough understanding of the meaning of the sensory data and high confidence in the appropriateness of future actions. In addition, a special obstacle‐avoidance concept is needed to prevent collisions and other types of accidents. The present paper discusses methods for both motion control and path planning for backhoe excavation. Experimental laboratory data are used to verify theoretical findings and to discuss the use of pattern recognition for the purpose of intelligent reasoning about the sensed environment. It is shown how patterns found in collected data could be used for automatic control of an autonomous excavator.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Alekseeva, T. V., Artem'ev, K. A., Bromberg, A. A., Voitsekhouskii, R. I., and Ul'yanov, N. A. (1985). Machines for earthmoving work. Amerind Publishing Co., Pvt. Ltd., New Delhi, India.
2.
Balovnev, V. I. (1983). New methods for calculating resistance to cutting of soil. Amerind Publishing Co., Pvt. Ltd., New Delhi, India.
3.
Bullock, D. M. (1988). “Supervisory control for cognitive excavation,” Master's thesis, Dept. Civ. Engrg., Carnegie‐Mellon Univ., Pittsburgh, Pa.
4.
Dassant, B. M., and Jansen, B. H. (1988). “A coupled expert system for automated signal interpretation.” Pattern Recognition and Artificial Intelligence, Elsevier Science Publishers, The Netherlands, 471–381.
5.
Desai, C. S., Phan, H. V., and Perumpral, J. V. (1982). “Mechanics of three‐dimensional soil‐structure interaction.” J. Engrg. Mech. Div., ASCE, 108(5), 731–747.
6.
Fu, K. S. (1980). Digital pattern recognition. Springer‐Verlag, New York, N.Y.
7.
Garbotz, G., and Drees, G. (1958). “Experiments on the play of forces with flat excavator cutting tools medium sand and slightly binding sandy silt with special consideration of the leveling blades and plane scraper bucket cutting edges.” Research Report 430, Ministry of Trade and Commerce, Westdeutscher Verlag GmbH, West Germany.
8.
Goertz, R. C. (1963). “Manipulators used for handling radioactive materials.” Human factors in technology, E. M. Bennett, ed., McGraw‐Hill, New York, N.Y.
9.
Gill, W. R., and Berg, G. E. (1968). Soil dynamics in tillage and traction. U.S. Dept. Agr., U.S. Government Printing Ofc., Washington, D.C.
10.
Goldenberg, H. A. (1988). “Implementation of force and impedance control in robot manipulators.” Proc. Conf. on Robotics and Autom., Institute of Electrical and Electronics Engineers, New York, N.Y., 1626–1632.
11.
Hogan, N. (1985). “Impedance control: An approach to manipulation.” J. Dyn. Sys. Meas., Control Trans. ASME, 107(Mar.), 1–24.
12.
Kuhn, G. (1954). “Shape of bulldozer blades to attain the smallest filling resistance.” Verein Deutsches Ingnieure, 96, 982–986, West Germany.
13.
Lee, J. B. (1990). “Rule‐based backhoe excavation: An experimental study,” Master's thesis, Dept. Civ. Engrg., Univ. of Maryland, College Park, Md.
14.
Pasch, K., and Seering, W. P. (1984). “On the drive systems for high performance machines.” J. Mech., Transm., Autom. Des., 106(7), 102–108.
15.
Paul, R. P. (1987). “Problems and research issues associated with the hybrid control of force and displacement.” Proc. Conf. on Robotics and Autom., Institute of Electrical and Electronics Engineers, New York, N.Y., 1966–1971.
16.
Zelenin, A. N., Balornev, V. I., Kerov, I. P. (1985). Machines for moving the earth. Amerind Publishing Co., Pvt. Ltd., New Delhi, India.
Information & Authors
Information
Published In
Copyright
Copyright © 1993 American Society of Civil Engineers.
History
Received: Oct 2, 1990
Published online: Jan 1, 1993
Published in print: Jan 1993
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.