Nondestructive Evaluation of the I-40 Bridge over the Rio Grande River
Publication: Journal of Performance of Constructed Facilities
Volume 18, Issue 4
Abstract
A nondestructive strength evaluation of the I-40 Bridge over the Rio Grande River in Albuquerque, N.M. was completed for the New Mexico Department of Transportation (NMDOT). The I-40 Bridge is a precast, prestressed concrete girder bridge located within of the “Big I” interchange carrying Interstates I-40 and I-25. Because of its location, the I-40 Bridge is subjected to large amounts of heavy truck traffic. The primary objective of the study reported herein was to determine a more accurate capacity rating for the I-40 Bridge and thus, reduce the number of overweight vehicle permit denials. To achieve this objective, a conventional rating analysis is first performed based on American Association of State Highway and Transportation Officials (AASHTO) guidelines. A diagnostic load test and a finite-element analysis are then completed. Details of the AASHTO rating analysis as well as the approach by which measured girder strains from the load test and finite-element results were considered in the capacity rating of the I-40 Bridge are discussed. Findings from the study confirmed that the capacity ratings of the I-40 Bridge could be safely increased by a factor of 1.7.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
American Association of State Highway and Transportation Officials (AASHTO). ( 1996). Standard specifications for highway bridges, 16th Ed., Washington, D.C.
2.
American Association of State Highway and Transportation Officials (AASHTO). ( 1998). LRFD bridge design specifications, 2nd Ed., Washington, D.C.
3.
American Association of State Highway and Transportation Officials (AASHTO). ( 2000). Manual for condition evaluation of bridges, Washington, D.C.
4.
American Concrete Institute (ACI). ( 1999). “Building code requirements for structural concrete.” ACI 318-99, Farmington Hills, Mich.
5.
Bakht, B., and Jaeger, L. G. (1990). “Bridge testing—A surprise every time.” J. Struct. Eng., 116(5), 1370–1383.
6.
Barker, M. G. (2001). “Quantifying field-test behavior for rating steel girder bridges.” J. Bridge Eng., 6(4), 254–261.
7.
Barr, P. J., Eberhard, M. O., and Stanton, J. F. (2001). “Live-load distribution factors in prestressed concrete girder bridges.” J. Bridge Eng., 6(5), 298–306.
8.
Burdette, E. G., and Goodpasture, D. W. ( 1988). “Correlation of bridge load capacity estimates with test data.” NCHRP Rep. No. 306, Transportation Research Board, National Research Council, Washington, D.C.
9.
Cai, C.S., and Shahawy, M. ( 2001). “A few issues of capacity rating of bridge from field measurement.” Proc., 80th Transportation Research Board Meeting, Washington, D.C.
10.
Chajes, M. J., Mertz, D. R., and Commander, B. (1997). “Experimental load rating of a posted bridge.” J. Bridge Eng., 2(1), 1–10.
11.
Chen, Y., and Aswad, A. (1996). “Stretching span capability of prestressed concrete bridges using AASHTO LRFD.” J. Bridge Eng., 1(3), 112–120.
12.
Computers and Structures Inc. ( 2000). “Integrated finite element analysis and design of structures.” SAP 2000, Berkeley, Calif.
13.
Conner, G.H., Stallings, J.M., McDuffie, T.L., Campbell, J.R., Fulton, R.Y., Shelton, B.A., and Mullins, R.B. ( 1997). “Bridge load testing in Alabama.” Proc., 76th Transportation Research Board Meeting, Washington, D.C.
14.
Goble, G., Commander, B., and Schulz, J. ( 2000). “Bridge testing: A state-of-the-art.” Proc., 79th Transportation Research Board Meeting, Washington, D.C.
15.
Hays, C.O., Sessions, L.M., and Berry, A.J. ( 1986). “Further studies on lateral load distribution using FEA.”, Transportation Research Record 1072, Transportation Research Board, Washington, D.C.
16.
Lichtenstein, A. G. ( 1998). “Manual for Bridge Rating through Load Testing.” Research Results Digest, No. 234, National Cooperative Highway Research Program, Washington, D.C.
17.
Mabsout, M. E., Tarhini, K. M., Frederick, G. R., and Tayar, C. (1997). “Finite-element analysis of steel girder highway bridges.” J. Bridge Eng., 2(3), 83–87.
18.
Pinjarkar, S. G., Guedelhoeter, O. C., Smith, B. S., and Kritzler, K. W. ( 1990). “Nondestructive load testing for bridge evaluation and rating.” NCHRP Project Rep. No. 12-28, Transportation Research Board, Washington, D.C.
19.
Shahawy, M. A. (1995). “Nondestructive strength evaluation of Florida bridges.” Proc. SPIE, 2456, 101–123.
20.
Sithichaikasem, S., and W. L. Gamble. ( 1971). “Effect of diaphragms in bridges in bridges with prestressed concrete I-section girders.” Civil Engineering Studies, Structural Research Series No. 383, Dept. of Civil Engineering, Univ. of Illinois, Urbana, Ill.
21.
Stallings, J. M., and Yoo, C. H. (1993). “Tests and ratings of short-span steel bridges.” J. Struct. Eng., 119(7), 2150–2168.
22.
Tarhini, K. M., and Frederick, G. R. (1992). “Wheel load distribution in I-girder highway bridges.” J. Struct. Eng., 118(5), 1285–1294.
23.
Zokaie, T., Oserkamp, T. A., and Imbsen, R. A. ( 1991). “Distribution of wheel loads on highway bridges.” NCHRP Proj. Rep. No. 12-26, Transportation Research Board, Washington, D.C.
Information & Authors
Information
Published In
Copyright
Copyright © 2004 ASCE.
History
Received: May 19, 2003
Accepted: Feb 13, 2004
Published online: Oct 15, 2004
Published in print: Nov 2004
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.