Vehicle-Induced Floor Vibrations in a Multistory Factory Building
Publication: Journal of Performance of Constructed Facilities
Volume 15, Issue 2
Abstract
A multistory factory building with elevated access allows loading and unloading of the raw materials and finished products right in front of each factory unit. This enhances the land productivity of land-scarce Singapore. However, container trucks traveling within the building may cause vibration of a production floor where high-precision equipment is located. In this study, a dynamic vehicle model is established to simulate a 40-ft container truck. The road roughness is represented by a power spectral density function according to ISO 8606. The random response of a typical production floor is analyzed by the fully coupled vehicle-structure interaction method as well as the decoupled moving dynamic nodal loading method. Compared with the acceleration and velocity acceptance criteria, the random response results show that the vertical response of the production floor to the container truck traveling at 15, 30, and 40 km/h over road classes B and C is generally acceptable. However, the maximum vertical vibration may exceed the more stringent criteria for some extremely high-precision equipment.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
British Standards Institution. ( 1995). “Mechanical vibration—Road surface profiles—Reporting of measured data.” BS 7853, London.
2.
Chompooming, K., and Yener, M. ( 1995). “The influence of roadway surface irregularities and vehicle deceleration on bridge dynamics using the method of lines.” Sound and Vibration, 183(4), 567–589.
3.
Esmailzadeh, E., and Ghorashi, M. ( 1997). “Vibration analysis of a Timoshenko beam subjected to a traveling mass.” Sound and Vibration, 199(4), 615–628.
4.
Green, M. F., and Cebon, D. ( 1997). “Dynamic interaction between heavy vehicles and highway bridges.” Comp. and Struct., 62, 253–264.
5.
Henchi, K., and Fafard, M. ( 1997). “Dynamic behavior of multi-span beams under moving loads.” Sound and Vibration, 199(1), 33–50.
6.
Jeffcott, H. H. ( 1929). “On the vibration of beams under the action of moving loads.” Phil. Meg., 7(8), 66.
7.
Pan, T. C., and Li, J. ( 1999). “Dynamic FE method for transient response of vehicle-structure coupling system.” Proc., Asia-Pacific Vibration Conf. '99 (A-PVC'99), Vol. I, 30–35.
8.
Ungar, E. E., Sturz, D. H., and Amick, C. H. ( 1990). “Vibration control design of high technology facilities.” Sound and Vibration, 24(7), 20–27.
9.
Yang, F., and Fonder, G. A. ( 1996). “An interative solution method for dynamic response of bridge-vehicles systems.” Earthquake Engrg. and Struct. Dyn., 25, 195–215.
10.
Yang, Y. B., and Lin, B. H. (1995). “Vehicle-bridge interaction analysis by dynamic condensation method.”J. Struct. Engrg., ASCE, 121(11), 1636–1643.
Information & Authors
Information
Published In
History
Received: Apr 13, 2000
Published online: May 1, 2001
Published in print: May 2001
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.