Economic Reservoir Design and Storage Conservation by Reduced Sedimentation
Publication: Journal of Water Resources Planning and Management
Volume 116, Issue 1
Abstract
A mathematical model has been developed for estimating the design storage capacity of a reservoir by using the expected water demand, storage loss due to sedimentation, and physical and hydrological characteristics of the watershed. Suitable mitigative measures can be incorporated in dam design and reservoir operation to substantially reduce sediment entrapment in the reservoir, and to improve dissolved oxygen levels by releasing hypolimnetic waters from the reservoir. These measures may also greatly reduce streambed degradation downstream of the dam and consequent initiation of a new erosion cycle in the tributaries. Reservoir design based on storage conservation is of prime importance considering the dearth of new feasible sites for reservoirs. Economic analyses for different storage‐maintenance measures (such as undersluices and flushing pipes) have been investigated in terms of reduction in initial reservoir design storage, cost of installing measures, and cost of any dredging operations. These analyses are performed for a site in Illinois for several water‐demand levels and useful lives of the reservoir.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bruk, S. (1985). Methods of computing sedimentation in lakes and reservoirs. United Nations Educational Scientific and Cultural Organization, Paris, France.
2.
Brune, G. M. (1953). “Trap efficiency of reservoirs.” American Geophysical Union Trans., 34(3), 407–418.
3.
Dawes, J. H., and Wathne, M. (1968). “Cost of reservoirs in Illinois.” Illinois State Water Survey Circular, (96), Champaign, Ill.
4.
Glymph, L. M. (1973). “Summary: Sedimentation of reservoirs.” Man‐made lakes: Their problems and environmental effects, W. C. Ackermann et al., eds., American Geophysical Union Monograph, 17.
5.
Lane, E. W., and Koelzer, V. A. (1943). “Density of sediments deposited in reservoirs.” Report 9, A study of methods used in the measurements and analysis of sediment loads in streams, U.S. Corps of Engrs., Univ. of Iowa, Iowa City, Iowa, Nov.
6.
Mahmood, K. (1987). “Reservoir sedimentation: Impact, extent, and mitigation.” Technical Paper No. 71, The World Bank, Washington, D.C.
7.
Rippl, W. (1883). “The capacity of storage reservoirs for water supply.” Proc., Institution of Civil Engineers, 71, 270–278.
8.
Roveri, E. (1981). “Reservoir capacity conservation.” Wasser, Energy, Luft, 73, 199–201.
9.
Singh, K. P. (1987). “Lake sedimentation reduction techniques.” Public Works, 118, Sept., 99–102.
10.
Singh, K. P., and Adams, J. R. (1980). “Adequacy and economics of water supply in Northeastern Illinois, 1985–2020.” Illinois State Water Survey Report of Investigation, (97), Champaign, Ill.
11.
Singh, K. P., and Durgunolu, A. (1986). “Storage maintenance through reduced lake sedimentation.” Proc., 7th Annual Symp., Indiana Water Resources Association, Angola, Indiana, Jun., 179–191.
12.
Singh, K. P., Durgunolu, A., and Ramamurthy, G. S. (1986). “Some solutions to underestimation of stream sediment yields.” Hydro. Sci. and Tech.: Short papers, 2(4), 1–7.
13.
Terstriep, M. L., et al. (1982). “Hydrologic design of impounding reservoirs in Illinois.” Illinois State Water Survey Bulletin 67, Champaign, Ill.
14.
Upper Mississippi River comprehensive basin study. (1970). Vols. III and VI, Upper Mississippi River Basin Commission, prepared under supervision of Upper Mississippi River Comprehensive Basin Study Coordinating Committee.
Information & Authors
Information
Published In
Copyright
Copyright © 1990 ASCE.
History
Published online: Jan 1, 1990
Published in print: Jan 1990
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.