Highway Alignment Optimization Incorporating Bridges and Tunnels
Publication: Journal of Transportation Engineering
Volume 133, Issue 2
Abstract
A three-dimensional highway alignment optimization methodology is developed that automatically determines whether and where bridges or tunnels are preferable to embankments or deep cuts, respectively. This is done by comparing the optimized costs of such alternatives. The data for detailed computations of earthwork, right-of-way, vehicle operation, user time, and other costs are obtained from a geographic information system (GIS) for each alternative alignment considered. The alignment optimization process relies on a genetic algorithm developed for this problem. Two example studies implemented in an artificial study area with a real GIS show that by modeling bridges and tunnels we can improve the reliability and adaptability of highway alignment optimization as well as find more practical solutions than otherwise.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers are thankful for the many valuable comments made by the anonymous reviewers, which enhanced the quality of the paper. This work was partially supported by the Maryland State Highway Administration.
References
AASHTO. (2001). A policy on geometric design of highways and streets, Washington, D.C.
Barker, R. M., and Puckett, J. A. (1997). Design of highway bridges, Wiley, New York.
Bendelius, A. G. (1996). “Chapter 20: Tunnel ventilation.” Tunnel engineering handbook, 2nd Ed., J. O. Bickel, T. R. Kuesel, and E. H. King, eds., Chapman & Hall, New York.
Fagan, M. E., and Phares, B. M. (2000). “Life-cycle cost analysis of a low-volume road bridge alternative.” Transportation Research Record. 1696, Transportation Research Board, Washington, D.C., 8–13.
Fwa, T. F. (1989). “Highway vertical alignment analysis by dynamic programming.” Transportation Research Record. 1239, Transportation Research Board, Washington, D.C., 1-9.
Goldberg, D. E. (1989). Genetic algorithms in search, optimization, and machine learning, Addison-Wesley, Reading, Mass.
Jha, M. K. (2000). “A geographic information systems-based model for highway design optimization.” Ph.D. dissertation, Univ. of Maryland, College Park, Md.
Jha, M. K., and Schonfeld, P. (2004). “A highway alignment optimization model using geographic information systems.” Transp. Res., Part A: Policy Pract., 38(6), 455–481.
Jha, M. K., Schonfeld, P., Jong, J.-C., and Kim, E. (2006). Intelligent road design, WIT, South Hampton, U.K.
Jong, J.-C. (1998). “Optimizing highway alignments with genetic algorithms.” Ph.D. dissertation, Univ. of Maryland, College Park, Md.
Jong, J.-C., Jha, M. K., and Schonfeld, P. (2000). “Preliminary highway design with genetic algorithms and geographic information systems.” Comput. Aided Civ. Infrastruct. Eng., 15(4), 261–271.
Jong, J.-C., and Schonfeld, P. (2003). “An evolutionary model for simultaneously optimizing 3-dimensional highway alignments.” Transp. Res., Part B: Methodol., 37(2), 107–128.
Kang, M. W., Jha, M. K., and Schonfeld, P. (2006). “Three-dimensional highway alignment optimization for Brookeville Bypass.” Proc., 85th Annual Transportation Research Board Meeting, Washington, D.C.
Kim, E. (2001). “Modeling intersections and other structures in highway alignment optimization.” Ph.D. dissertation, Univ. of Maryland, College Park, Md.
Kim, E., and Schonfeld, P. M. (2001). “Estimating highway earthwork cross sections using vector and parametric representation.” Transportation Research Record. 1772, Transportation Research Board, Washington, D.C., 48–54.
King, E. H., and Kuesel, T. R. (1996). “Chapter 1: An introduction to tunnel engineering.” Tunnel engineering handbook, 2nd Ed., J. O. Bickel, T. R. Kuesel, and E. H. King, eds., Chapman & Hall, New York.
Meiarashi, S., Nishizaki, I., and Kishima, T. (2002). “Life-cycle cost of all-composite suspension bridge.” J. Compos. Constr., 6(4), 206–214.
Michalewicz, Z. (1996). Genetic algorithms data structures evolution programs, 3rd Ed., Springer, New York.
Mitsuru, S., Sinha, K. C., and Anderson, V. L. (1988). “Bridge replacement cost analysis.” Transportation Research Record. 1180, 19–24, Transportation Research Board, Washington, D.C.
Mowczan, P. A. (1996). “Chapter 21: Tunnel lighting.” Tunnel engineering handbook, 2nd Ed., J. O. Bickel, T. R. Kuesel, and E. H. King, eds., Chapman & Hall, New York.
O’Connor, C. (1971). Design of bridge superstructures, Wiley, New York.
Organization of Economic Co-Operation and Development (OECD). (1973). Optimisation of road alignment by the use of computers, Paris.
Shaw, J. F. B., and Howard, B. E. (1982). “Expressway route optimization by OCP.” Transp. Engrg. J., 108(3), 227–243.
Information & Authors
Information
Published In
Copyright
© 2007 ASCE.
History
Received: Jul 9, 2003
Accepted: May 22, 2006
Published online: Feb 1, 2007
Published in print: Feb 2007
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.