Effect of Aggregate Spacing on Skid Resistance of Asphalt Pavement
Publication: Journal of Transportation Engineering
Volume 129, Issue 4
Abstract
In the design of skid resistant asphalt pavements, it is a common practice in pavement engineering to perform laboratory tests to ensure that the paving aggregate has the required frictional resistance and wheel-polishing resistance, and to specify a minimum surface texture depth of the completed pavement to provide adequate surface drainage for safe travel in wet weather. These controls, however, may not be adequate for all types of pavement construction. For instance, field experience in Singapore indicated that aggregate spacing, or gap width between aggregates, had important effects on the skid resistance of asphalt pavements. This paper describes a laboratory study to examine the effect of aggregate gap width on frictional resistance of laboratory prepared specimens. Aggregate gaps ranging from 2 to 10 mm were studied. The 2 mm gap represents that of a dense graded mix, while 10 mm gaps are found in a typical porous asphalt mixture. The British pendulum tester was adopted for the experimental evaluation of frictional resistance. The laboratory test results confirmed the effect of aggregate spacing as observed in the field. Further experimental tests using laboratory fabricated portland cement specimens indicated that the area of the contact surface, as well as the number of gaps within the test area have significant effect on the measured frictional resistance. There is a need for pavement engineers to examine this effect in the asphalt pavement mix design process to ensure that adequate skid resistance will be achieved in actual construction.
Get full access to this article
View all available purchase options and get full access to this article.
References
ASTM. (2000a). “Standard test method for measuring surface friction properties using the British pendulum tester.” ASTM Standard E303, 2000 annual book of ASTM standards, American Society for Testing and Materials, Conshohocken, Pa.
ASTM. (2000b). “Standard test method for accelerated polishing of aggregates using the British wheel.” ASTM Standard D3319, 2000 annual book of ASTM standards, American Society for Testing and Materials, Conshohocken, Pa.
Corley-Lay, J. B. (1998). “Friction and surface texture characterization of 14 pavement test sections in Greenville, North Carolina.” Transportation Research Record, 1639, Transportation Research Board, Washington, D.C., 155–161.
Crouch, L. K., Head, S. G., and Goodwin, W. A. (1996). “Aggregate polishing resistance pre-evaluation.” Transportation Research Record, 1530, Transportation Research Board, Washington, D.C., 101–110.
Forster, S. W. (1989). “Pavement microtexture and its relation to skid resistance.” Transportation Research Record, 1215, Transportation Research Board, Washington, D.C., 151–164.
Grip Tester. (1998). Grip tester specifications, Findlay Irvine Ltd., Midlothian, Scotland, U.K.
Highway Research Board (1972). “Skid resistance.” National Cooperative Highway Research Program Synthesis, Washington, D.C.
Kandhal, P. S., Parker, F., Jr., and Bishara, E. A. (1993). “Evaluation of Alabama limestone aggregates for asphalt wearing courses.” Transportation Research Record, 1418, Transportation Research Board, Washington, D.C., 12–21.
Liu, Y. R., Fwa, T. F., and Choo, Y. S.(2001). “Effect of aggregate properties on pavement skid resistance.” J. Eastern Asia Soc. Transp. Studies, 4(1), 511–518.
Veith, A. G. (1986). “The most complex tire-pavement interaction: Tire wear.” In the tire pavement interaction, M. G. Pottinger and T. J. Yager, eds., ASTM Special Technical Publication STP No. 929, American Society for Testing and Materials, Conshohocken, Pa.
Information & Authors
Information
Published In
Copyright
Copyright © 2003 American Society of Civil Engineers.
History
Received: Jan 15, 2002
Accepted: Jun 20, 2002
Published online: Jun 13, 2003
Published in print: Jul 2003
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.