Determining Need for and Location of Truck Escape RAMPS
Publication: Journal of Transportation Engineering
Volume 123, Issue 5
Abstract
The main objective of this paper is to introduce a systematic approach to determine the need for and location of truck escape ramps (TERs). The approach utilizes variables concerning the design vehicle, the road, and the driver. These variables are included in either a stochastic or deterministic form. Vehicle variables include vehicle type, gross vehicle weight, and brake type. Road variables include the profile (length and steepness of grade), horizontal curvature (cornering speed), and the availability of a brake-check area at the top of the grade. Driver variables include information about the driver's actions at the brake-check area, brake checking, and gear selection. A number of supplementary variables are also included, such as accident history and the presence of objects in the path of a runaway vehicle. The approach also utilizes a number of existing vehicle-road performance models to generate relevant data concerning the descent speed, cornering stability, and brake temperature. The application of the methodology is illustrated with examples from highways in mountainous terrain of Jordan and western Canada. The examples selected are diverse and were chosen to illustrate the generalized nature of the methodology.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
A Policy on geometric design of highways and streets. (1990). Am. Assn. of State Hwy. and Transp. Officials (AASHTO), Washington, D.C.
2.
Abdelwahab, W. M. (1994). “Runaway lane facilities: warrants and design.”Rep. No. MOTH-HS94-01, Ministry of Transp. and Hwy., Victoria, B.C., Canada.
3.
Alison, J. R., Hahn, K. C., and Bryden, J. E. (1978). Performance of a gravel-bed truck-arrestor system. N.Y. State Dept. of Transp., Albany, N.Y.
4.
Archilla, R., and Morrall, J. (1994). “Traffic characteristics on two-lane highway downgrades.”Proc., 2nd Int. Symp. on Hwy. Capacity, Australian Res. Board, Sydney, Australia, 51–70.
5.
Ballard, A. J. (1983). “Current state of truck escape ramp technology.”Transp. Res. Rec. 923, Transp. Res. Board, Nat. Res. Council, Washington, D.C., 35–42.
6.
Bowman, B. L. (1989). Grade severity rating system (GSRS)—users manual. Fed. Hwy. Admin., Washington, D.C.
7.
Brown, R. G.(1984). “Report on arrestor bed tests carried out by the NSW Department of Main Roads in March 1982.”Australian Rd Res., Sydney, Australia, 12(7), 110–125.
8.
Cocks, G. C., and Goodram, L. W. (1982). “The design of vehicle arrestor beds.”Proc., Australian Res. Board, Sydney, Australia, 11(Part 3), 24–34.
9.
Eck, R. W. (1979). “State practices and experience in the use and location of truck escape facilities.”Transp. Res. Rec. 736, Transp. Res. Board, Nat. Res. Council, Washington, D.C., 37–43.
10.
Eck, R. W.(1983). “Techniques for identifying problem downgrades.”J. Transp. Engrg., ASCE, 109(4), 604–610.
11.
Fancher, P., Winkler, C., and Campbell, C. (1992). “The influence of braking strategy on brake temperatures in mountain descents.”Rep. No. UMTRI-92-11, The Univ. of Michigan Transp. Res. Inst., Ann Arbor, Mich.
12.
“Interim guidelines for design of emergency escape ramps.” (1979). Fed. Hwy. Admin. Tech. Advisory T5040.10, U.S. Dept. of Transp., Washington, D.C.
13.
Khan, A. M., Wong, J. Y., and Rastogi, M. (1990). “Heavy vehicle performance on grade and climbing lane criteria.”Rep. No. TDS-90-11, Res. and Devel. Branch, Ontario Ministry of Transp. and Hwy., Downview, Canada.
14.
Navin, F. P. D.(1992). “Estimating truck's critical cornering speed and factor of safety.”J. Transp. Engrg., ASCE, 118(1), 130–145.
15.
Stanley, A. F. (1978). “A calculator program to estimate truck coasting speeds for designing gravel arrestor beds.”Rep., Idaho Dept. of Transp., Boise, Idaho.
16.
Truck ability prediction procedure, SAE recommended practice. (1987). Soc. of Automotive Engrs., Warrendale, Pa.
17.
Truck escape ramps. (1989). Inst. of Transp. Engrs. (ITE), Washington, D.C.
18.
Tye, E. J. (1986). “Design guide for truck escape ramps.”Traffic Bull. No. 24, California Business, Transp. and Housing Agency, Sacramento, Calif.
19.
Wambold, J. C. (1988). Truck escape ramp design methodology, Volume 1: executive summary. Pennsylvania Transp. Inst., Pennsylvania State Univ., Pa.
20.
Wambold, J. C., Rivera-Ortiz, L. A., and Wang, M. C. (1988). Truck escape ramp design methodology, Volume 2: final report. Pennsylvania Transp. Inst., Pennsylvania State Univ., Pa.
21.
Witheford, D. K. (1992). Synthesis of highway practice 178: truck escape ramps. Nat. Cooperative Hwy. Res. Program (NCHRP), Transp. Res. Board, Nat. Res. Council, Washington, D.C.
Information & Authors
Information
Published In
Copyright
Copyright © 1997 American Society of Civil Engineers.
History
Published online: Sep 1, 1997
Published in print: Sep 1997
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.