Analysis and Simulation of Road Profiles
Publication: Journal of Transportation Engineering
Volume 122, Issue 3
Abstract
The power spectral density (PSD) estimate is a parameter commonly used to characterize the acceleration of vehicles and, in conjunction with closed-loop random vibration controllers, to simulate the transport environment. The vertical acceleration experienced by the loading tray of road transport vehicles is mainly a function of the type of suspension, load, vehicle speed, and road surface characteristics. While the first three parameters may vary considerably between and during journeys, the statistical parameters used to describe road surface profiles are much less susceptible to change with respect to time. This paper presents a brief analysis and discussion of the spectral and statistical characteristics of actual road surface elevation records. The deviation of the road profile distribution from the Gaussian distribution is revealed, and it is shown that roads of different roughness seem to retain their spectral shape. In addition, a range of statistical parameters are introduced and recommended for use in the classification of road profiles. A technique in which a random vibration controller is used to simulate road profile spectra by controlling the displacement instead of the acceleration of a shaker table is demonstrated. The technique uses a physical model of a vehicle suspension to account for the dynamic characteristics of the vehicle. Finally, the use of digital signal processors (DSP) together with a time domain adaptive filter control technique for the accurate reproduction of synthesized demand signals is presented.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Cartwright, D. E., and Longuet-Higgins, M. S. (1956). “The statistical distribution of the maxima of a random function.”Proc., Royal Soc. of London, England, Ser. A., Vol. 237, 212–232.
2.
Charles, D.(1993). “Derivation of environment descriptions and test severities from measured road transportation data.”J. Inst. of Envir. Sci., 6(1), 37–42.
3.
De Pont, J. (1994). “Road profile characterisation.”Res. Rep. No. 29, Transit New Zealand, Auckland, New Zealand.
4.
Dodds, C. J., and Robson, J. D. (1973). “The description of road surface roughness.”J. Sound and Vibration, Vol. 31, 175–183.
5.
Gillespie, T. D. (1986). “Developments in road roughness measurement and calibration procedures.”Proc., 13th ARRB/5th REAAA Conf., Australian Road Res. Board (ARRB), Melbourne, Australia, Vol. 23, Part 1, 91–112.
6.
Hasegawa, K. (1989). “Analysis of vibration and shock occurring in transport systems.”Packaging Technol. and Sci., Vol. 2, 69–74.
7.
Nordstrom, J., Trost, T., and Cavlin, S. (1986). “Computer aided transport simulation.”Publ. No. 46/86, Swedish Packaging Res. Inst.
8.
Press, H. W. et al. (1993). Numerical recipes in C, 2nd Ed., Cambridge University Press, New York, N.Y.
9.
Rice, S. O. (1994). “The mathematical analysis of random noise.”Bell Sys. Tech. J., Vol. 23, 282–332.
10.
Rice, S. O. (1945). “The mathematical analysis of random noise.”Bell Sys. Tech. J., Vol. 24, 46–156.
11.
Richards, D. P.(1990). “A review of analysis and assessment methodologies for road transportation vibration and shock data.”Envir. Engrg., 3(4), 23–26.
12.
Richards, D. P., and Hibbert, B. R.(1994). “A round robin exercise on road transportation data.”Envir. Engrg., 7(2), 9–27.
13.
Rouillard, V., and Lleonart, G. T. (1994). “A spectral feedback compensation technique for the generation of random wave fields.”J. Mech. Engrg. Sci., Vol. 208, 105–112.
14.
Sayers, M., Gillespie, T. D., and Queiroz, C. A. V. (1986). “The international road roughness experiment: establishing correlation and a calibration standard for measurements.”World Bank Tech. Paper, No. 45, The World Bank, Washington, D.C.
15.
Trost, T. (1988). “Mechanical stresses on products during air cargo transportation.”Packaging Technol. and Sci., Vol. 1, 137–155.
Information & Authors
Information
Published In
Copyright
Copyright © 1996 American Society of Civil Engineers.
History
Published online: May 1, 1996
Published in print: May 1996
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.