Spalling of Continuously Reinforced Concrete Pavements
Publication: Journal of Transportation Engineering
Volume 120, Issue 3
Abstract
Field investigation of continuously reinforced concrete pavements indicate the presence of delaminations at a depth of approximately 2.5 cm (1 in.) below the concrete pavement slab surface. These delaminations originate at the transverse cracks/joints and extend into the pavement from 5 to 15 cm (2 to 6 in.) and vary in width along the transverse crack. Coring of sample pavement sections indicates that spalling distress is an advanced state of these delaminations. It is assumed, given these delaminations, that spalling occurs due to stresses in the delaminated concrete layer that may be caused by wheel loads, temperature change, and the presence of moisture in the delamination. Strong evidence suggests the presence of more spalling on the downstream side (with regard to traffic flow) of the transverse cracks/joints, and that this mode of spalling is generated from shear stresses caused by a vehicle tire on the pavement. Static finite‐element analysis of the delaminated portion of a pavement slab indicates that stresses caused by a vehicle tire on the pavement can be sufficient to further extend the delaminations, thus creating spalls.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Emborg, M. (1989). “Thermal stresses in concrete structures at early ages,” PhD thesis, Lulea University of Technology, Lulea, Sweden.
2.
“Failure and repair of continuously reinforced concrete pavement.” (1979). Nat. Cooperative Hwy. Res. Program Synthesis 60, NCHRP, National Research Council, Washington, D.C.
3.
Gutierriz de Veiasco, M., and McCullough, B. F. (1981). “Summary report for 1978 CRCP condition survey in Texas.” Res. Rept. 177‐20, Ctr. for Transp. Res., Univ. of Texas, at Austin, Tex.
4.
McCullough, B. F., Ma, J. C. M., and Noble, C. S. (1979). “Limiting criteria for the design of CRCP.” Res. Rept. 177‐17, Ctr. for Transp. Res., Univ. of Texas, at Austin, Tex.
5.
Shelby, M. D., and McCullough, B. F. (1960). “Experience in Texas with continuously reinforced concrete pavement.” Highway Res. Board Bull. 274, 1–29.
6.
Smith, K. D., Mueller, A. L., Darter, M. I., and Peshkin, D. G. (1990). “Performance of jointed concrete pavements: Volume II—Evaluation and modification of concrete pavement design and analysis models.” Res. Rept. FHWA‐RD‐89‐137, ERES Consultants, Savoy, Ill.
7.
Tayabji, S. D., and Colley, B. E. (1986). “Improved rigid pavement joints.” Res. Rep. FHWA/RD‐86/040, Constr. Tech. Lab., A Div. of Portland Cement Assoc., Skokie, Ill.
8.
Tielking, J. T. (1991). “Pavement shear forces produced by truck tires.” Memo., Dept. of Civ. Engrg., Texas A & M Univ., College Station, Tex.
9.
Tielking, J. T., and Roberts, F. L. (1987). “Tire contact pressure and its effect on pavement strain.” J. of Transp. Engrg., ASCE, 113(1), 56–71.
10.
Zollinger, D. G., and Barenberg, E. J. (1990). “Continuously reinforced pavements: punchouts and other distresses and implications for design.” Res. Rept. No. FHWA/IL/UI 227, Ill. Dept. of Transp., Dept. of Civ. Engrg., Engrg. Experiment Station, Univ. of Illinois, Urbana, Ill.
Information & Authors
Information
Published In
Copyright
Copyright © 1994 American Society of Civil Engineers.
History
Published online: May 1, 1994
Published in print: May 1994
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.