Statistical Evaluation of Truck Overloads
Publication: Journal of Transportation Engineering
Volume 118, Issue 5
Abstract
This paper examines statistics of truck overloads on highways. An overload is defined as a load that exceeds the legal truckload limit. The overload statistics depend on truck types; each is specified by the number of axles. The truckload spectra examined in this paper reveal that overloads generally appear with a distinctly different pattern than that in lower load levels. This is especially true among trucks with five or more axles. To derive a theoretical probability distribution model to represent different patterns in a load spectrum, mixed distribution models are introduced in this paper. A mixed distribution is made of two different functions, each representing one of the different patterns appearing in the load spectrum. These functions are linearly combined and adjusted to represent the overloads and all other loads statistics properly. Using the statistics of overloads, along with a damage estimation model, one can determine to what extent overloads are responsible for damage done to bridges and highways. The probability of occurrence of specific truck weights exceeding the legal load limit can be used to estimate the frequency of occurrence of heavier loads in transportation facilities and thus determine the damage potentials of overloads. This information can be used along with routine engineering analyses that many pertinent state agencies conduct when issuing truck‐overload permits.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Ang, A. H.‐S., and Tang, W. H. (1975). Probability concepts in engineering planning and design. Vol. 1, John Wiley & Sons, Inc., New York, N.Y.
2.
Ang, A. H.‐S., and Munse, W. H. (1975). “Practical reliability basis for structural fatigue.” National Engineering Convention, ASCE, New York, N.Y., preprint 2494.
4.
Daniels, J. H. (1977). “Use of Bartonsville bridge to weigh trucks in motion.” Report No. 415.1 Fritz Engrg. Lab., Lehigh Univ., Bethlehem, Pa. 1–3.
5.
“High speed weighing in motion traffic load data.” (1987). Report 2, Illinois Dept. of Transp., Springfield, Ill.
6.
Shah, N. (1989). “An investigation of overloads on highway bridges,” MS thesis, Illinois Inst. of Tech., Chicago, Ill.
7.
Snyder, R. E., Likins, G. E., and Moses, F. (1985). “Loading spectrum experienced by bridge structures in the United States.” Report RD‐85/012, Federal Highway Admin., Washington, D.C.
8.
Vincent, G. S. (1969). “Tentative criteria for load factor design of steel highway bridges.” Bulletin No. 15, Amer. Iron and Steel Inst., Washington, D.C.
9.
Yoder, E. J., and Witczak, M. W. (1975). Principles of pavements design. 2nd Ed., John Wiley & Sons, Inc., New York, N.Y., 147–152.
Information & Authors
Information
Published In
Copyright
Copyright © 1992 ASCE.
History
Published online: Sep 1, 1992
Published in print: Sep 1992
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.