AASHTO Direct Structural Capacity Method Error Analysis
Publication: Journal of Transportation Engineering
Volume 118, Issue 1
Abstract
The AASHTO Direct Structural Capacity method utilizes an approximate composite pavement modulus to predict an effective structural number based on deflection measurements. An analysis of the errors associated with the approximation is presented. The modulus approximation is purported to predict a composite pavement's modulus to within 15% when its base course thickness is less than twice the applied load radius. However, when typical pavement deflections are derived using a multilayer elastic solution and then used to back‐calculate the composite modulus, errors significantly greater than 15% can occur in both the composite pavement modulus and the effective structural number. Engineers who use composite‐modulus‐based procedures should be aware that approximation error may be significant, especially when analyzing thick pavements.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
AASHTO guide for design of pavement structures. (1986). Am. Assoc. of State Highway and Transp. Officials, Washington, D.C.
2.
Bushing, H. W., Roberts, F. L., Rosten, J. P., and Schwartz, A. E. (1971). “An evaluation of the relative strength of flexible pavement components.” Final Report for the South Carolina Dept. of Highways and Public Transp., Dept. of Civ. Engrg., Clemson University, Clemson, S.C.
3.
Kopperman, S., Tiller, G., and Tseng, M. (1986). ELSYM5: Microcomputer Version, User's Guide for IBM‐PC's and Compatibles. Report FHWA‐TS‐87‐206, Federal Highway Administration, Washington, D.C.
4.
Rada, G. R., Witczak, M. W., and Rabinow, S. D. (1988). “Comparison of AASHTO structural evaluation techniques using nondestructive deflection testing.” Transp. Res. Record 1207, Transp. Res. Board, Nat. Res. Council, Washington, D.C.
5.
Roadway design manual. (1972). South Carolina Dept. of Highways and Pub. Transp. (SCDHPT), Columbia, S.C.
6.
Standard specifications for highway construction. South Carolina Dept. of Highways and Pub. Transp. (SCDHPT), Columbia, S.C.
7.
Thenn De Barros, S. (1966). “Deflection factor charts for two‐ and three‐layer elastic systems.” HRR 145, Highway Res. Board, National Res. Council, Washington, D.C.
Information & Authors
Information
Published In
Journal of Transportation Engineering
Volume 118 • Issue 1 • January 1992
Pages: 20 - 32
Copyright
Copyright © 1992 ASCE.
History
Published online: Jan 1, 1992
Published in print: Jan 1992
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.