Aspects of Highway Superelevation Design
Publication: Journal of Transportation Engineering
Volume 117, Issue 6
Abstract
The method of calculating superelevation in highway curves and its effects on vehicle dynamics and safety is of great importance in highway design. United States and German guidelines' relevant methods are presented and compared in this paper. The main differences between these two methods are related to design and operating speed concepts and their use to calculate superelevation for curve radii exceeding the absolute minimum. Some modifications to the current AASHTO superelevation design approaches are proposed, based on the relationship between the degree of curve and actual operating speeds, to harmonize highway superelevation design with drivers' actual speed behavior, which could enhance highway safety.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Craus, J., and Livneh, M. (1978). “Superelevation and curvature of horizontal curves.” Transp. Res. Record 685, 7–13.
2.
“Designing safer roads.” (1987). Special Report 214, Transportation Research Board, National Research Council, Washington, D.C.
3.
Hayward, J. (1980). “Highway alignment and superelevation: Some design‐speed misconceptions.” Transp. Res. Record 757, 22–25.
4.
Köppel, G. (1986). “Strassenentwurf—Rückblick and Ausblick.” Strasse und Autobahn (in German), Bonn, Germany, 9, 395–402.
5.
Lamm, R. (1984). “Driving dynamic considerations: A comparison of German and American friction coefficients for highway design.” Transp. Res. Record 960, 13–19.
6.
Lamm, R., and Choueiri, E. (1987). “Recommendations for evaluating horizontal design consistency based on investigations in the state of New York.” Transp. Res. Record 1122, 68–78.
7.
Leisch, J., and Leisch, J. P. (1977). “New concepts in design—speed application,” Transp. Res. Record 631, 4–14.
8.
McLean, J. (1981). “Driver speed behaviour and rural road alignment design.” Traffic Engineering and Control, London, England, 22(4), 208–211.
9.
Neuman, T. (1986). “Impacts of the 1984 AASHTO design policy on urban freeway design.” Transp. Res. Record 1100, 40–45.
10.
A policy on geometric design of rural highways. (1965). AASHO, Washington, D.C.
11.
A policy on geometric design of highways and streets. (1984). American Association of State Highway and Transportation Officials (AASHTO), Washington, D.C.
12.
“Richtlinien für dieAnlage von Strassen, RAS, Teil: Linienftihrung (RAS‐L), Abschn‐itt 1: Elemente der Linienführung, (RAL‐L‐1).” (1984). Forschimgsgesellschaft für Strassen—und Verkehrswesen (in German), Kirschbaum Verlag, Bonn‐Bad Godesberg, Germany.
Information & Authors
Information
Published In
Copyright
Copyright © 1991 ASCE.
History
Published online: Nov 1, 1991
Published in print: Nov 1991
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.