Climatic Considerations in New AASHTO Flexible Pavement Design
Publication: Journal of Transportation Engineering
Volume 117, Issue 2
Abstract
This research is undertaken to study and assess carefully the effect of climatic factors on the new American Association of State Highway and Transportation Officials (AASHTO) design for flexible pavements. Climatic factors considered include seasonal changes in the subgrade moisture content and the annual variations in the ambient temperature. Through a sensitivity analysis of the new AASHTO equation, the change in the structural number required to offset a reduction in the subgrade resilient modulus due to an increase in moisture content is evaluated; an adjusted structural number is thus calculated. The impact of the ambient temperature on the asphalt‐concrete layer is evaluated by considering the interactive result of temperature and fatigue damage; the concept of weighted effective dynamic modulus is thus used. A rational method is proposed to select the appropriate asphalt grade to minimize both low‐temperature cracking and rut depth. By knowing the asphalt grade and the mix properties, the weighted, effective asphalt‐layer coefficient is calculated. An example to illustrate how climatic considerations can be incorporated into the AASHTO design is presented.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
AASHTO guide for design of pavement structures. (1986). Am. Assoc. of State Highway and Transp. Officials, Washington, D.C.
2.
Barber, E. S. (1957). “Calculation of maximum pavement temperature from weather report.” Highway Research Bulletin 168, Highway Res. Board, Washington, D.C., 1–8.
3.
Basma, A. A., and George, K. P. (1984). “Environmental factors in flexible pavement design.” Transp. Res. Record, 954, Washington, D.C., 52–58.
4.
Black, W. P. M. (1962). “A method of estimating the California bearing ratio of cohesive soils from plasticity data.” Geotechnique, London, England, 12(4), 271–282.
5.
Dempsey, B. J. (1976). “Climatic effects of airport pavement systems: State of the art.” Report No. FAA‐RD‐75‐196, Office of the Chf. of Engrs., U.S. Army, Federal Aviation Admin./U.S. Dept. of Transp., Washington, D.C.
6.
Janssen, D. J., and Dempsey, B. J. (1980). “Soil water properties of subgrade soils.” Transportation Engineering Series 27, Illinois Cooperative Highway and Transportation Series 184, Final Report, Dept. of Civ. Engrg., Univ. of Illinois, Urbana, Ill.
7.
Janssen, D. J., and Dempsey, B. J. (1981). “Soil‐moisture properties of subgrade soils.” Transp. Res. Record, 790, 61–66.
8.
Larry, J. A., and Mahoney, J. P. (1984). “Seasonal effects on the strength of pavement structures.” Transp. Res. Record, 954, 88–94.
9.
Monismith, C. L., Hicks, R. G., and Salem, Y. M. (1972). “Basic properties of pavement components.” Report No. FHWA‐RD‐72‐19, Federal Highway Admin., Washington, D.C.
10.
Thompson, M. R., and Robnett, Q. L. (1976). “Data summary: Resilient properties of subgrade soils.” Transportation Engineering Series 14, Illinois Cooperative Highway and Transportation Series 160, Final Report, Dept. of Civ. Engrg., Univ. of Illinois, Urbana, Ill.
11.
Von Quintus, H. L., Finn, F. N., Hudson, W. R., and Roberts, F. L. (1980). “Flexible and composite structures for premium pavements.” Vols. 1 and 2, Report No. FHWA‐RD‐80, U.S. Dept. of Transp., Washington, D.C.
Information & Authors
Information
Published In
Journal of Transportation Engineering
Volume 117 • Issue 2 • March 1991
Pages: 210 - 223
Copyright
Copyright © 1991 ASCE.
History
Published online: Mar 1, 1991
Published in print: Mar 1991
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.