Impact of Fuel Conservation Measures on Safe Truck Downgrade Speeds
Publication: Journal of Transportation Engineering
Volume 115, Issue 4
Abstract
Runaway truck accidents are primarily due to brake fade and failure resulting from excessive temperature of the truck system brake components generated while descending severe downgrades. A grade severity rating system (GSRS) was developed in 1982 that determined the maximum safe downgrade speeds for various categories of truck gross weights. Heavy trucks, without retarders, that adhere to the maximum recommended descent speed have sufficient braking capacity to prevent a runaway condition. Since the development of the GSRS model, the use of radial truck tires and the manufacture of streamlined truck tractors have increased substantially. These fuel conservation measures reduce the nonbraking forces and place a greater load on the truck system brakes when it is necessary to maintain truck speed on downgrades. The impact of fuel conservation measures on truck system brake temperature is the equivalent of descending a downgrade which is 0.34% steeper than actual conditions. In addition, fuel conservation measures lower the threshold of truck weight susceptible to excessively high brake temperatures, and subsequent runaway conditions, from 45,000 to 35,000 lb.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Fancher, P., et al. (1981). Retarders for heavy vehicles: evaluation of performance characteristics and in‐service costs. Report No. DOT‐HS‐805‐807, Nat. Highway Traffic Safety Administration, U.S. Dept. of Transp., Washington, D.C., Feb.
2.
Johnson, W. A., DiMarco, R. J., and Allen, W. R. (1982). The development and evaluation of a prototype grade severity rating system. Report No. FHWA‐RD‐81‐185, Fed. Highway Administration, U.S. Dept. of Transp., Washington, D.C., Mar.
3.
Myers, T. M., et al. (1980). Feasibility of a grade severity rating system. Report No. FHWA‐RD‐79‐116, Fed. Highway Administration, U.S. Dept. of Transp., Washington, D.C., Aug.
4.
“Truck ability prediction procedure.” (1977). SAE J688, SAE Handbook, 37.02–37.04.
Information & Authors
Information
Published In
Copyright
Copyright © 1989 ASCE.
History
Published online: Dec 1, 1989
Published in print: Dec 1989
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.