Seismic Performance of a Transfer Plate Structure
Publication: Journal of Structural Engineering
Volume 134, Issue 11
Abstract
In regions without seismic provisions, it is common to use transfer plates as part of the structural system. In this paper, pseudodynamic tests with substructure techniques were conducted on an 1:4 scale test specimen representing the first 2 stories of a 18-story high-rise building with a transfer plate under earthquake actions. Columns of the test specimen were strengthened to prevent failure under the pseudodynamic tests. Three types of time–history records were applied, including triangular waves and a series of El-Centro Earthquakes. Based on the experimental results, it is predicted that the bottom of the transfer plate will be severely damaged when subjected to an El-Centro Earthquake with maximum acceleration at .
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers are grateful for the financial support from the Research Grant Council of Hong Kong through a RGC research grant (RGC Grant No. PolyU 5026/98E) and The Hong Kong Polytechnic University (Project No: G-V853).
References
Aoyama, H. (2001). “RC high-rise buildings in seismic areas.” Design of modern high-rise reinforced concrete structures, H. Aoyama, ed., Imperial College, London.
British Standards Institution (BSI). (1985). “Structural use of concrete.” BS8110:1985, London.
Chen, A., Lam, S. S. E., and Wong, Y. L. (2000). “Verification of a pseudodynamic testing system.” Proc., Int. Conf. on Advances in Structural Dynamics, Vol. 2, 851–858.
Li, C. S., Lam, S. S. E., and Wong, Y. L. (2003). “New stiffness indicators for a high-rise building with transfer plate.” Proc., 3rd Cross-Strait Conf. on Structural and Geotechnical Engineering, 339–347.
Mirza, M. S., Harris, H. G., and Sabnis, G. M. (1979). “Structural models in earthquake engineering.” Proc., 3rd Canadian Conf. of Earthquake Engineering, Vol. 1, 511–549.
National Standard. (2001). “Code of seismic design of buildings.” GB50011-2001, Beijing.
Nakashima, M., Kato, H., and Takaoka, E. (1992). “Development of real-time pseudodynamic testing.” Earthquake Eng. Struct. Dyn., 21, 79–92.
Negro, P., Verzeletti, G., Magonette, G. E., and Pinto, A. V. (1994). “Tests on a four storey full-scale R/C frame designed according to Eurocodes 8 and 2.” Preliminary Rep. No. EUR15879 EN, ELSA, Joint Research Centre, Ispra, Italy.
Paulay, T., and Priestley, M. J. N. (1992). Seismic design of reinforced concrete and masonry buildings, Wiley, New York.
Sanada, Y., Kabeyasawa, Y., and Kuramoto, H. (2000). “Three-dimensional analysis of a reinforced concrete frame-wall structure with soft first story.” Transaction of the Japan Concrete Institute, 22.
Scarlat, A. S. (1997). “Design of soft stories—A simplified approach.” Earthquake Spectra, 13(2), 305–315.
Shing, P. B., and Mahin, S. A. (1984). “Pseudodynamic test method for seismic performance evaluation: Theory and implementation.” University of California, Berkeley, Calif.
Structural Engineers Association of California (SEAOC). (1999). Recommended lateral force requirements and commentary, Seismology Committee.
Takanashi, K., and Nakashima, M. (1987). “Japanese activities on on-line testing.” J. Eng. Mech., 113(7), 1014–1032.
Uniform Building Code (UBC). (1997). Int. Conf. of Building Officials.
Woo, J. C., Chung, B. Y., Nam, S. K., and Ju, W. S. (1999). “Shaking table and pseudodynamic tests for the evaluation of seismic performance of base-isolated structures.” Eng. Struct., 21, 365–379.
Yoshimura, M. (1997). “Nonlinear analysis of a reinforced concrete building with a soft first story collapsed by the 1995 Hyogoken-Nanbu Earthquake.” Cem. Concr. Compos., 19(3), 213–221.
Information & Authors
Information
Published In
Copyright
© 2008 ASCE.
History
Received: Apr 6, 2004
Accepted: Feb 14, 2006
Published online: Nov 1, 2008
Published in print: Nov 2008
Notes
Note. Associate Editor: Panos Tsopelas
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.