Seismic Design of Friction-Damped Precast Concrete Frame Structures
Publication: Journal of Structural Engineering
Volume 133, Issue 11
Abstract
This paper presents the seismic design of unbonded posttensioned precast concrete frame structures that use friction dampers for supplemental energy dissipation. A procedure is described to determine the friction damper slip forces and posttensioning steel areas needed to satisfy prescribed design lateral strength and energy dissipation requirements for a trial frame with given geometry, beam and column member dimensions, and selected damper distribution. The proposed design procedure assumes that the lateral strength requirements for the frame have been obtained from a linear elastic analysis of the structure under equivalent lateral forces. Nonlinear reversed-cyclic analyses of friction-damped precast concrete beam-column subassemblies and multistory frame structures under lateral loads are conducted to critically evaluate the design procedure and to identify areas where improvement may be needed. The analytical results show that friction-damped precast frames can be designed to achieve significant energy dissipation levels while maintaining a large level of self-centering capability due to the posttensioning force.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research was funded by the National Science Foundation (NSF) under Grant No. NSFCMS 98-74872 as a part of the CAREER Program. The support of the NSF Program Directors Dr. S. C. Liu and Dr. S. L. McCabe is gratefully acknowledged. In addition, the writers recognize the technical and financial support provided by industry partnerships with: R. W. Monroe and D. R. Poweleit of the Steel Founders’ Society of America; R. Reddy of Southwest Steel Casting Company of Longview, Texas; C. E. Hilgeman and M. A. Fusani of Concrete Technology, Inc. of Springboro, Ohio; and K. B. Allen and D. Martin of Dywidag-Systems International of Bolingbrook, Ill. The opinions, findings, and conclusions expressed in this paper are those of the writers and do not necessarily reflect the views of the NSF or the individuals and organizations acknowledged above.
References
ACI Innovation Task Group 1. (2001a). Acceptance criteria for moment frames based on structural testing (T1.1–01) and commentary (T1.1R-01), American Concrete Institute, Farmington Hills, Mich.
ACI Innovation Task Group 1. (2001b). “Special hybrid moment frames composed of discretely jointed precast and posttensioned concrete members (ACI T1.2-XX) and commentary (T1.2R-XX).” ACI Struct. J., 98(5), 771–784.
Cheok, G., and Lew, H. (1993). “Model precast concrete beam-to-column joints subject to cyclic loading.” PCI J., 38(4), 80–92.
Christopoulos, C., Filiatrault, A., Uang, C.-M., and Folz, B. (2002). “Post tensioned energy dissipating connections for moment-resisting steel frames.” J. Struct. Eng., 128(9), 1111–1120.
El-Sheikh, M., Sause, R., Pessiki, S., and Lu, L. W. (1999). “Seismic behavior and design of unbonded posttensioned precast concrete frames.” PCI J., 44(3), 54–71.
Englekirk, R. (2002). “Design-construction of the Paramount—A 39-story precast prestressed concrete apartment building.” PCI J., 47(4), 56–71.
Garlock, M. M., Ricles, J. M., and Sause, R. (2005). “Experimental studies of full-scale posttensioned steel connections.” J. Struct. Eng., 131(3), 438–448.
Grigorian, C., Yang, T., and Popov, E. (1993). “Slotted bolted connection energy dissipators.” Earthquake Spectra, 9(3), 491–504.
International Code Council (ICC). (2006). International building code 2006, Falls Church, Va.
Kurama, Y. C., Weldon, B. O., and Shen, Q. (2006). “Experimental evaluation of posttensioned hybrid coupled wall subassemblages.” J. Struct. Eng., 132(7), 1017–1029.
Morgen, B., and Kurama, Y. (2004a). “A friction damper for posttensioned precast concrete beam-to-column joints.” Proc., 13th World Conf. on Earthquake Engineering (CD-ROM), Vancouver, BC, Canada.
Morgen, B., and Kurama, Y. (2004b). “A friction damper for posttensioned precast concrete moment frames.” PCI J., 49(4), 112–133.
Morgen, B., and Kurama, Y. (2007). “Friction-damped unbonded posttensioned precast concrete moment frame structures for seismic regions.” Structural Engineering Research Rep. NDSE-07-01, Dept. of Civil Engineering and Geological Sciences, Univ. of Notre Dame, Notre Dame, Ind.
Prakash, V., Powell, G., and Campbell, S. (1993). “DRAIN-2DX base program description and user guide; Version 1.10.” Rep. No. UCB/SEMM-93/17, Dept. of Civil and Environmental Engineering, Univ. of California, Berkeley, Calif.
Priestley, M., and MacRae, G. (1996). “Seismic tests of precast beam-to-column joint subassemblages with unbonded tendons.” PCI J., 41(1), 64–81.
Priestley, M., Sritharan, S., Conley, J., and Pampanin, S. (1999). “Preliminary results and conclusions from the PRESSS five-story precast concrete test building,” PCI J., 44(6), 42–67.
Priestley, M., and Tao, J. (1993). “Seismic response of precast prestressed concrete frames with partially debonded tendons.” PCI J., 38(1), 58–67.
Stone, W., Cheok, G., and Stanton, J. (1995). “Performance of hybrid moment-resisting precast beam-column concrete connections subjected to cyclic loading.” ACI Struct. J., 92(2), 229–249.
Way, D. (1996). “Friction-damped moment resisting frames.” Earthquake Spectra, 12(3), 623–633.
Weldon, B., and Kurama, Y. (2007). “Unbonded posttensioned precast concrete coupling beams: An experimental evaluation.” Proc., ASCE Structures Congress, Long Beach, Calif.
Information & Authors
Information
Published In
Copyright
© 2007 ASCE.
History
Received: Jan 19, 2005
Accepted: Sep 18, 2006
Published online: Nov 1, 2007
Published in print: Nov 2007
Notes
Note. Associate Editor: Michael D. Symans
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.