Identification of the Location and Level of Damage in Multiple-Bolted-Joint Structures by PZT Actuator-Sensors
Publication: Journal of Structural Engineering
Volume 132, Issue 2
Abstract
A piezoceramic (PZT) patch can be used simultaneously as an actuator and as a sensor for structural damage detection by utilizing its electromechanical coupling property. In this technique, a PZT actuator-sensor patch is bonded on a structure. Through the measurement of its electrical impedance, which is related to mechanical impedance of the structure being bonded, the change in structure properties due to damage can be detected. This paper presents the use of PZT actuator-sensors in conjunction with numerical model-based methodology in order to identify the location and level of the damage in multiple-bolted-joint structures. Laboratory experiments were performed on a two-joint and a four-joint aluminum beam, where the damage was simulated by loosening the bolts. The impedance was measured at high frequencies so that the wavelength of the excited motion is small and sensitive enough to detect local damage. Numerical models of structures were formulated by using a spectral element method, which has a high capability for high-frequency modeling. By utilizing the models, the location and level of the damage could be quantitatively identified.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgment
The first writer wishes to express his thanks to the Japanese Ministry of Education, Culture, Sports, Science and Technology for their scholarship during his study and research in Japan.
References
Crawley, E. F., and Anderson E. H. (1990). “Detailed models of piezoceramic actuation of beams.” J. Intell. Mater. Syst. Struct., 1(1), 4–25.
Doyle, J. F. (1997). Wave propagation in structures: Spectral analysis using fast discrete Fourier transforms, 2nd Ed., Springer, New York.
Esteban, J., Lalande, F., and Rogers, C. A. (1996). “Parametric study on the sensing region of a collocated PZT actuator-sensor.” Proc., 1996 SEM VIII Int. Congress on Experimental Mechanics, Society for Experimental Mechanics, Bethel, Conn.
Fujino, Y., and Abe, M. (2001). “Structural health monitoring in civil infrastructures and R&D of SHM of bridges at The University of Tokyo.” Proc., 3rd Int. Workshop on Structural Health Monitoring: The Demands and Challenges, CRC Press, Boca Raton, Fla. 61–70.
Jang, J-S. R., Sun, C-T., and Mizutani, E. (1997). Neuro-fuzzy and soft computing: A computational approach to learning and machine intelligence, Prentice-Hall, Englewood Cliffs, N.J.
Lee, U., and Lee, J. (1997). “Dynamic analysis of one- and two-dimensional structures using spectral element methods.” Proc., Sixth Int. Conf. on Recent Advances in Structural Dynamics ISVR, Institute of Sound and Vibration, Southampton, U.K. 263–277.
Lee, U., and Leung, Y. T. (2000). “The spectral element method in structural dynamics.” Shock Vib. Dig., 32(6), 451–465.
Lee, U., and Shin, J. (2002). “A frequency-domain method of structural damage identification formulated from dynamic stiffness equation of motion.” J. Sound Vib., 257(4), 615–634.
Park, G., Cudney, H. H., and Inman, D. J. (1999). “Impedance-based health monitoring for civil structures.” Proc., 2nd Int. Workshop on Structural Health Monitoring, CRC Press, Boca Raton, Fla. 523–532.
Park, G., Cudney, H. H., and Inman, D. J. (2001). “Feasibility of using impedance-based damage assessment for pipeline structures.” Earthquake Eng. Struct. Dyn., 30(10), 1463–1474.
Peairs, D. M., Park, G., and Inman, D. J. (2001). “Self-monitoring and self-healing bolted joint.” Proc., 3rd Int. Workshop on Structural Health Monitoring, CRC Press, Boca Raton, Fla. 430–439.
Piezo System, Inc. (1993–2005 ). ⟨http://www.piezo.com⟩.
Ritdumrongkul, S., Abe, M., Fujino, Y., and Miyashita, T. (2004). “Quantitative health monitoring of bolted joints using a piezoceramic actuator-sensor.” Smart Mater. Struct., 13(1), 20–29.
Soh, C. K., Tseng, K. K-H., Bhalla, S., and Gupta, A. (2000). “Performance of smart piezoceramic patches in health monitoring of a RC bridge.” Smart Mater. Struct., 9(4), 533–542.
Sun, F. P., Chaudhry, Z., Liang, C., and Rogers, C. A. (1995). “Truss structure integrity indentification using PZT sensor-actuator.” J. Intell. Mater. Syst. Struct., 6(1), 134–139.
Tiersten, H. F. (1969). Linear piezoelectric plate vibrations: Elements of the linear theory of piezoelectricity and the vibrations of piezoelectric plates, Plenum, New York.
Information & Authors
Information
Published In
Copyright
© 2006 ASCE.
History
Received: Aug 5, 2004
Accepted: Jul 26, 2005
Published online: Feb 1, 2006
Published in print: Feb 2006
Notes
Note. Associate Editor: Reginald DesRoches
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.