Damage Detection of a Prestressed Concrete Beam Using Modal Strains
Publication: Journal of Structural Engineering
Volume 131, Issue 9
Abstract
Different methods are proposed in literature using experimental modal information to detect possible damage. In this paper a finite-element (FE) model updating technique is applied. The unknown properties of a FE model are adapted, such that the differences between experimental modal data (modal curvature in combination with eigenfrequencies and mode shapes) and the corresponding analytical predictions are minimized. An iterative sensitivity based algorithm is used for solving this optimization problem. The method is applied to the damage assessment of a gradually damaged prestressed concrete beam. It is assumed, that damage can be characterized by reducing the bending stiffness. The main focus of this paper is to analyze the influence of using modal curvatures. In contrast to eigenfrequencies and mode shapes, modal curvatures are very sensitive to local changes of the bending stiffness nearby the sensor location, but insensitive to local changes far from the measurement location.
Get full access to this article
View all available purchase options and get full access to this article.
References
Abdel Wahab, M., and de Roeck, G. (1999). “Damage detection in bridges using modal curvatures: Application to a real damage scenario.” J. Sound Vib., 226(2), 217–235.
Abeele, K. V. D., and Visscher, J. (2000). “Damage assessment in reinforced concrete using spectral and temporal nonlinear vibration techniques.” Cem. Concr. Res., 30(9), 1453–1464.
Beck, J., and Arnold, K., Parameter estimation in engineering and science, Wiley, New York.
Doebling, S., Farrar, C., and Prime, M. (1998). “A summary review of vibration-based damage identification methods.” Shock Vib. Dig., 30(2), 91–105.
Fox, C. (1992). “The location of defects in structures: a comparison of the use of natural frequencies and mode shape data.” Proc., 10th Int. Modal Analysis Conf., 522–528.
Fox, R., and Kapoor, M. (1968). “Rate of change of eigenvalues and eigenvectors.” AIAA J., 6, 2426–2429.
Hamed, E., and Frostig, Y. (2004). “Free vibrations of cracked prestressed concrete beams.” Eng. Struct., 26(11), 1611–1621.
Luo, H., and Hanagud, S. (1997). “An integral equation for changes in the structural dynamics characteristics of damaged structures.” Int. J. Solids Struct., 34(35–36), 4557–4579.
Maaskant, R., Alavie, T., Measures, R., Tadros, G., Rizkalla, S., and Guha-Thakurta, A. (1997). “Fibre-optic Bragg grating sensors for bridge monitoring.” Cem. Concr. Compos., 19(1), 21–23.
Maeck, J., De Roeck, G., Abdel Wahab, M., Peeters, B., De Visscher, J., De Wilde, W., Ndambi, J.-M., and Vantomme, J. (2000). “Damage identification in reinforced concrete structures by dynamic stiffness determination.” Eng. Struct., 22(10), 1339–1349.
Maia, N. M. M., Silva, J. M. M., (1997). Theoretical and experimental modal analysis, Research Studies Press Ltd., Somerset, U.K.
Ndambi, J. (2002). “Damage assessment in reinforced concrete beams by damping analysis.” PhD thesis, Free University Brussels, Brussels, Belgium.
Nocedal, J., and Wright, S. J. (1999). Numerical optimization, Springer, New York.
Pandey, A., Biswas, M., and Samman, M. (1991). “Damage detection from changes in curvature mode shapes.” J. Sound Vib., 145(2), 321–332.
Peeters, B. (2000). “System identification and damage detection in civil engineering.” PhD thesis, K. U. Leuven, Leuven, Belgium.
Saeed Mirza, M., Ferdjani, O., Hadj-Arab, A., Joudar, K., and Khaled, A. (1990). “An experimental study of static and dynamic response of prestressed concrete box girder bridges.” Can. J. Civ. Eng., 17(3), 481–493.
Sahin, M., and Shenoi, R. (2003). “Quantification and localisation of damage in beam-like structures by using artificial neural networks with experimental validation.” Eng. Struct., 25(14), 1785–1802.
Salawu, O. (1997). “Detection of structural damage through changes in frequency: a review.” Eng. Struct., 19(9), 718–723.
Teughels, A., Maeck, J., and De Roeck, G. (2002). “Damage assessment by FE model updating using damage functions.” Comput. Struct. 80(25), 1869–1879.
Van Overschee, P., and De Moor, B. (1993). “Subspace algorithm for the stochastic identification problem.” Automatica, 29(3), 649–660.
Information & Authors
Information
Published In
Copyright
© 2005 ASCE.
History
Received: Dec 3, 2003
Accepted: Nov 29, 2004
Published online: Sep 1, 2005
Published in print: Sep 2005
Notes
Note. Associate Editor: Barry Thomas Rosson
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.