Analytical Model of Concrete-Filled Fiber-Reinforced Polymer Tubes based on Multiaxial Constitutive Laws
Publication: Journal of Structural Engineering
Volume 131, Issue 9
Abstract
A model is proposed for predicting the compression behavior of axially loaded concrete cylinders confined by fiber reinforced polymer (FRP) shells. To capture the active confinement applied by the FRP, an orthotropic hypoelasticity-based constitutive law is used for the concrete. This law is defined the triaxial stress space. The confinement-induced concrete strength enhancements are computed from a four-parameter failure surface. The corresponding peak strain increase is computed using a newly proposed strain enhancement factor. The FRP shell behavior is modeled using a stress-strain relation for plane stress orthotropic laminated composites. The proposed model is implemented into an incremental approach for the analysis of compression tests. No iterations are needed to find the stresses corresponding to prescribed axial strains. The model is verified with correlation studies with different experimental tests on concrete-filled FRP cylinders.
Get full access to this article
View all available purchase options and get full access to this article.
References
Becque, J., Patnaik, A. K., and Rizkalla, S. H. (2003). “Analytical models for concrete confined with FRP tubes.” J. Compos. Constr., 7(1), 31–38.
Darwin, D., and Pecknold, D. A. (1977). “Nonlinear biaxial stress-strain law for concrete.” J. Eng. Mech. Div., 103(2), 229–241.
Davol, A., Burgueño, R., and Seible, F. (2001). “Flexural behavior of circular concrete filled FRP shells.” J. Struct. Eng., 127(7), 810–817.
Elwi, A. A., and Murray, D. W. (1979). “A 3D hypoelastic concrete constitutive relationship.” J. Eng. Mech. Div., 105(4), 623–641.
Fam, A. Z., and Rizkalla, S. H. (2001). “Confinement model for axially loaded concrete confined by circular fiber-reinforced polymer tubes.” ACI Struct. J., 98(4), 451–461.
Gerstle, K. H. (1981). “Simple formulation of biaxial concrete behavior.” ACI J., 78(1), 62–68.
Hsieh, S. S., Chen, W. F., and Ting, E. C. (1979). “An elastic-fracture model for concrete.” ASCE Proc. 3d Eng. Mech. Div. Spec. Conf., ASCE, Reston, Va., 437–440.
Jones, M. J. (1999). “Mechanics of composite materials.” 2nd Ed., Taylor & Francis.
Kawashima, K., Hosotani, M., and Hoshikuma, J. (1997). “A model for confinement effect for concrete cylinders confined by carbon fiber sheets.” NCEER-NICEDE Workshop on Earthquake Engineering Frontiers in Transportation Facilities, NCEER, State Univ. of New York, Buffalo, N.Y.
Kupfer, H. B., and Gerstle, K. H. (1973). “Behavior of concrete under biaxial stresses.” J. Eng. Mech. Div., 99(4), 852–866.
Kupfer, H. B., Hildorf, H. K., and Rusch, H. (1969). “Behavior of concrete under biaxial stresses.” ACI J., 66(8), 656–666.
Kwon, M., and Spacone, E. (2002). “Three-dimensional finite element analyses of reinforced concrete columns.” Comput. Struct., 80(8), 199–212.
Mander, J. B., Priestley, M. J., and Park, R., (1988). “Theoretical stress-strain model for confined concrete.” J. Struct. Eng.114(8), 1804–1826.
Mills, L. L., and Zimmerman, R. M. (1970). “Compressive strength of plain concrete under multiaxial loading conditions.” ACI J., 67(10), 802–807.
Mirmiran, A., and Shahawy, M. (1997). “Behavior of concrete columns confined by fiber composites.” J. Struct. Eng., 123(5), 583–590.
Nanni, A., and Bradford, N. M. (1995). “FRP jacketed concrete under uniaxial compression.” Constr. Build. Mater., 9(2), 115–124.
Pantazopoulou, S. J., and Mills, R. H. (1995). “Microstructural aspects of the mechanical response of plain concrete.” ACI Mater. J., 92, 605–616.
Picher, F., Rochette, P., and Labossiere, P. (1996). “Confinement of concrete cylinders with CFRP.” Proc., 1st Int. Conf. on Composites in Infrastructure, H. Saadatmanesh and M. R. Ehsani, eds., Univ. of Arizona, Tucsan, Ariz., 829–841.
Rechart, F. E., Brandzaeg, A., and Brown, R. L. (1928). “A study of the failure of concrete under combined compressive stresses.” Bull. No. 185, Univ. of Illinois Engineering Experimental Station, Urbana, I11.
Saenz, L. P. (1964). “Discussion of equation for the stress-strain curve of concrete by Desayi and Krishman.” ACI J., 61(9), 1229–1235.
Samaan, M., Mirmiran, A., and Shahawy, M. (1998). “Model of concrete confined by fiber composites.” J. Struct. Eng., 124(9), 1025–1031.
Selby, R. G. (1993). “Three-dimensional constitutive relations for reinforced concrete.” PhD thesis, Univ. of Toronto, Toronto.
Spoelstra, M. R., and Monti, G. (1999). “FRP-confined concrete model.” J. Compos. Constr., 3(3), 143–150.
Information & Authors
Information
Published In
Copyright
© 2005 ASCE.
History
Received: Apr 15, 2003
Accepted: Feb 10, 2005
Published online: Sep 1, 2005
Published in print: Sep 2005
Notes
Note. Associate Editor: Dat Duthinh
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.