Poststrengthening of Concrete Slabs: Full-Scale Testing and Design Recommendations
Publication: Journal of Structural Engineering
Volume 129, Issue 6
Abstract
This paper reports on an experimental research project concerning the poststrengthening of concrete slabs with externally bonded carbon fiber reinforced polymers (CFRP). The two problems studied were strengthening in order to double the load-bearing capacity of slabs and restoration of the original load-bearing capacity of rebars that had been accidentally cut. To this end, the load conditions and the geometrical conditions of steel rebars as well as the length and distribution of CFRP strips were varied. Design, test setup, and selected results of the tests are presented and discussed. On the basis of these tests, design recommendations are given for strengthening and repair. These design recommendations are consistent with the steps typically used for the design and dimensioning of slabs and beams in structural concrete. These steps include calculation of the bending resistance, the shear resistance and the anchoring length of the reinforcement.
Get full access to this article
View all available purchase options and get full access to this article.
References
American Concrete Institute (ACI). (1989). “Building code requirements for reinforced concrete.” ACI 318, Detroit.
European Code (EC). (1991). “Structural concrete.” EC 2.
Garden, H. N., Quantrill, R. J., Hollaway, L. C., Thorne, A. M., and Parke, G. A. R.(1998). “An experimental study of the anchorage length of carbon fiber composite plates used to strengthen reinforced concrete beams.” Constr. Build. Mat. , 12, 203–219.
Hörmann, M., Seible, F., Karbhari, V., and Seim, W. (1998). “Preliminary structural tests for strengthening of concrete slabs using FRP composites.” SSRP Rep. No. TR-98-13, Univ. of California, San Diego.
Kaiser, H. (1989). “Bewehren von Stahlbeton mit kohlenstoffaserverstärkten Epoxydharzen.” PhD thesis, ETH Zürich, Switzerland (in German).
Meier, U.(1996). “Strengthening of structures using carbon fiber/epoxy composites.” Constr. Build. Mat., 6, 341–351.
Meier, U., Deuring, M., Meier, H., and Schwegler, G. (1993). “Strengthening of structures with advanced composites.” Alternative materials for the reinforcement and prestressing of concrete, J. L. Clarke, ed., Glasgow, 153–171.
New Zealand Standard (NZS). (1982). “New Zealand standard code of practice for the design of concrete structures.” NZS 3101, Standard Association of New Zealand, Wellington, New Zealand.
Rostasy, F. S., Neubauer, U., and Hankers Ch. (1997). “Verstärken von Betontragwerken mit geklebter äußerer Bewehrung aus kohlenstoffaserverstärkten Kunststoffen.” Beton-und Stahlbetonbau, Vol. 5, Berlin, Germany, 132–138 (in German).
Seim, W., Hörmann, M., Karbhari, V., and Seible, F.(2001). “External FRP-poststrengthening of scaled concrete slabs.” J. Compos. Constr., 5(2), 67–75.
SIA (1989). “Betonbauten.” SIA 162, Schweizerischer Ingenieur- und Architekten-Verein, Zürich, Switzerland (in German).
SIKA Carbodur. (1997). “Engineering guidelines for the use of Sika CarboDur (CFRP) laminates for structural strengthening of concrete structures.”
SIKA Chemie GmbH. (1997). “Allgemeine Bauaufsichtliche Zulassung für die Verstärkung von Stahlbeton- und Spannbetonbauteilen durch schubfest aufgeklebte Kohlefaserlamellen ‘Sika CarboDur’.” General Permission. Deutsches Institut für Bautechnik, Berlin (in German).
Information & Authors
Information
Published In
Copyright
Copyright © 2003 American Society of Civil Engineers.
History
Received: May 19, 2000
Accepted: Aug 22, 2002
Published online: May 15, 2003
Published in print: Jun 2003
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.