Experimental Study on Steel Shear Wall with Slits
Publication: Journal of Structural Engineering
Volume 129, Issue 5
Abstract
A new type of earthquake-resisting element, consisting of a steel plate shear wall with vertical slits, is introduced. In this system, the steel plate segments between the slits behave as a series of flexural links, which provide a fairly ductile response without the need for heavy stiffening of the wall. Test results are presented for 42 wall plate specimens of roughly one-third of full scale, which were subjected to static monotonic and cyclic lateral loading. These tests provide data on general behavior of the walls, which provides the basis for models to calculate the wall strength and stiffness and design the out-of-plane stiffening. When properly detailed and fabricated to avoid premature failure due to tearing or out-of-plane buckling, the wall panels respond in a ductile manner, with a concentration of inelastic action at the top and bottom of the flexural links. The test data indicate that limiting the width-to-thickness ratio to less than 20 in the flexural links will ensure that the walls can sustain roughly 3% drift without substantial hysteretic degradation.
Get full access to this article
View all available purchase options and get full access to this article.
References
Astaneh-Asl, A. (2001). “Seismic behavior and design of steel shear walls.” Steel Tips, Structural Steel Education Council, Moraga, Calif.
Caccese, V., Elgaaly, M., and Chen, R.(1993). “Experimental study of thin steel-plate shear walls under cyclic load.” J. Struct. Eng., 119(2), 573–587.
Driver, R. G., Kulak, G. L., Kennedy, L., and Elwi, A.(1998). “Cyclic test of four-story steel plate shear wall.” J. Struct. Eng., 124(2), 112–130.
Drucker, D. C.(1956). “The effect of shear on plastic bending of beams.” J. Appl. Mech., 23, 509–514.
FINAS user’s manual, version 13.0. (1995). Japan Nuclear Cycle Development Institute and CRC Solutions Corp., Ibaraki, Japan.
Hitaka, T., and Matsui, C. (1998). “Strength and behavior of steel bearing wall with slits.” Proc., 5th Pacific Steel Struct. Conf., Seoul, Korea, 991–996.
Hitaka, T., Matsui, C., Tsuda, K., and Yanagida, Y. (2000). “Elastic-plastic behavior of building steel frame with steel bearing wall with slits.” Proc., 12th World Conf. on Earthquake Engineering, Auckland, New Zealand, 833/6/A.
Kulak, G. L.et al. (2001). “Steel plate shear walls—An overview.” Eng. J., 38(1), 50–62.
Mimura, H., and Akiyama, H. (1966). “Load-deflection relationship of earthquake-resistant steel shear walls with a developed diagonal tension field.” Trans. AIJ, AIJ, 109–114 (in Japanese).
Mutoh, K., Miyashita, O., Osada, M., and Kanayama, H. (1968). “Stress and deformation of slit wall, using FEM.” Summaries of Technical Papers of Annual Meeting AIJ, Chugoku, Japan, 543–544 (in Japanese).
Omori, S., Toyama, K., Cho, T., and Takahashi, T. (1966). “Test on RC shear wall with slits.” Summaries of Technical Papers of Annual Meeting AIJ, Kanto, Japan, 204–205 (in Japanese).
Takahashi, Y., Takemoto, Y., Takeda, T., and Takeda, M. (1973). “Experimental study on thin steel shear walls and particular bracing under alternative horizontal load.” Preliminary Rep., IABSE Symposium on Resistance and Ultimate Deformability of Structures Acted on by Well-defined Repeated Loads, International Association for Bridges and Structural Engineering, Lisbon, Portugal, 185–191.
Timoshenko, S., and Gere, J. M. (1961). Theory of elastic stability, 2nd Ed., McGraw-Hill, New York, 239–250.
Information & Authors
Information
Published In
Copyright
Copyright © 2003 American Society of Civil Engineers.
History
Received: Jan 3, 2002
Accepted: Aug 13, 2002
Published online: Apr 15, 2003
Published in print: May 2003
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.