Quasi-Static Reversed Cyclic Response of Level and Stepped Cripple Walls
Publication: Journal of Structural Engineering
Volume 129, Issue 5
Abstract
Old residential buildings, such as those built before 1960, were commonly supported on cripple walls, which are walls constructed of short wooden studs between the foundation and first floor framing. For most of these old buildings, the inertial force developed by the horizontal earthquake ground motion must be resisted entirely by the cripple wall and wall-to-foundation connection. Past earthquakes in California have shown that unbraced cripple walls are particularly vulnerable due to insufficient lateral resistance, even for a moderate level of ground shaking. This paper summarizes the results of a test program conducted on level and stepped cripple walls. Specimens with details representative of current construction and retrofit were tested using displacement histories recommended for ordinary and near-fault ground motions. Key parameters of the test program included the height and slope of the cripple wall, gravity load level, stucco finish, loading history, and framing details for stepped cripple walls. Results from the test program are compared with current design values.
Get full access to this article
View all available purchase options and get full access to this article.
References
American Forest and Paper Association (AFPA). (1991). National design specifications for wood construction—revised edition, Washington, D.C.
American Society for Testing and Materials (ASTM). (1995). “Standard test method for determining bending yield moment of nails F1575-95.” West Conshohocken, Pa.
California Seismic Safety Commission (CSSC). (1994). “1994 Northridge Earthquake building case studies project—case study 4.4—one-story retrofitted dwelling.” Sacramento, Calif.
California Universities for Research in Earthquake Engineering (CUREe). (1999). Proc., Invitational Workshop on Seismic Testing, Analysis and Design of Woodframe Construction. Publication no. W-01, Richmond, Calif.
City of Los Angeles. (1996). “Findings and recommendations of the hillside buildings subcommittee task force on evaluating damage from the Northridge Earthquake.” LA Dept. of Building and Safety, and Structural Engineers Association of Southern California, Los Angeles.
Earthquake Engineering Research Institute (EERI). (1996). “Loma Prieta Earthquake reconnaissance report—supplement to vol. 6.” Earthquake Spectra, Oakland, Calif.
Federal Emergency Management Agency (FEMA). (1997). “NEHRP guidelines for the seismic rehabilitation of buildings (FEMA-273)”, Washington D.C.
Ficcadenti, S., Steiner, M., Pardeon, G., and Kazanjy, R. (1998). “Cyclic loading testing of woodframe, plywood sheathed shearwalls using ASTM E564 and three loading sequences.” Proc., 6th U.S. National Conference on Earthquake Engineering.
Krawinkler, H., Parisi, F., Ibarra, L., Ayoub, A., and Medina, R. (2001). “Development of a testing protocol for woodframe structures.” Publication no. W-02, California Universities for Research in Earthquake Engineering (CUREe), Richmond, Calif.
Roselund, N. (1996). “Special characteristics of wood-framed hillside construction.” Proc., Structural Considerations of Building Conservation Towards the 21st Century, Structural Engineers Association of Southern California, Los Angeles.
Schmid, B. L., Nielsen, R. J., and Linderman, R. R.(1994). “Narrow plywood shear panels.” Earthquake Spectra, 10(3), 569–588.
Shepherd, R., and Delos-Santos, E. O.(1991). “An investigation of retrofitted cripple walls.” Bull. Seismol. Soc. Am., 81(5), 2111–2126.
Steiner, M. R. (1993). “Experimental testing of cripple wall retrofits using plywood and oriented strand board.” An independent study supervised by R. Shepherd, Univ. of California, Irvine, Calif.
UCBC. (1997). “Uniform building code for building conservation.” International Conference of Building Officials, Whittier, Calif.
Vukazich, S. M. (1998). “The apartment owner's guide to earthquake safety.” Residential Seismic Safety Program, City of San Jose, Calif.
Information & Authors
Information
Published In
Journal of Structural Engineering
Volume 129 • Issue 5 • May 2003
Pages: 567 - 575
Copyright
Copyright © 2003 American Society of Civil Engineers.
History
Received: Jan 7, 2002
Accepted: May 28, 2002
Published online: Apr 15, 2003
Published in print: May 2003
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.