Application of Dynamic System Identification to Timber Beams. I
Publication: Journal of Structural Engineering
Volume 127, Issue 4
Abstract
In this first part of a two-part paper, development of a method of dynamic system identification for timber beams is presented with an analytical verification of the method using a finite-element model. A method of global nondestructive evaluation for identifying local damage and decay in timber beams is investigated in this paper. Experimental modal analysis is used in conjunction with a previously developed damage localization algorithm. The damage localization algorithm utilizes changes in modal strain energy between the mode shapes of a calibrated model, representing the undamaged state of the beam of interest, and the experimentally obtained mode shapes for a timber beam. Analytical evaluations were performed to demonstrate and verify the use of this method of global nondestructive evaluation for the localization of damage or decay in timber beams. In a companion paper, experimental laboratory tests are presented that verify the use of dynamic system identification to locate damage within timber beams.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Aktan, A. E., et al. ( 1992). “Nondestructive and destructive testing of a reinforced concrete slab bridge and associated analytical studies.” Rep. No. UC-CII 92/02, Ohio Department of Transportation.
2.
Alampalli, S., Fu, G., and Aziz, I. A. ( 1992). “Modal analysis as a bridge inspection tool.” Proc., 10th Int. Modal Anal. Conf., Vol. 2, 1359–1366.
3.
Bolton, R., Stubbs, N., Park, S., and Choi, H. ( 1998). “Analysis of Lavic Road overcrossing field data.” Engrg. Technol. Dept., Texas A&M University, College Station, Tex.
4.
Emerson, R. N., Pollock, D. G., Kainz, J. A., Fridley, K. J., McLean, D. I., and Ross, R. J. ( 1998). “Nondestructive evaluation techniques for timber bridges.” Proc., 1998 World Conf. on Timber Engrg. (WCTE), Presses Polytechniques et Universitaires Romandes, 670–677.
5.
Halvorsen, W. G., and Brown, D. L. ( 1977). “Impulse technique for structural frequency response testing.” Sound and Vibration, Nov.
6.
Inman, D. J. ( 1996). Engineering vibration, Prentice-Hall, Englewood Cliffs, N.J.
7.
Mazurek, D. F., and DeWolf, J. T. (1990). “Experimental study of bridge monitoring technique.”J. Struct. Engrg., ASCE, 116(9), 2532–2549.
8.
Park, S., and Stubbs, N. ( 1995). “Reconstruction of mode shapes using Shannon's sampling theorem and its application to the nondestructive damage localization algorithm.” Proc., SPIE, Smart Struct. and Mat. 1995, Vol. 2446, 280–292.
9.
Park, S., and Stubbs, N. ( 1996). “Bridge diagnostics via vibration monitoring.” Proc., SPIE, Smart Struct. and Mat. 1996, Vol. 2719, 36–45.
10.
Peterson, S. T., et al. (2001). “Application of dynamic system identification to timber beams. II.”J. Struct. Engrg., ASCE, 127(4), 426–432.
11.
Raghavendrachar, M., and Aktan, A. E. (1992). “Flexibility by multireference impact testing for bridge diagnostics.”J. Struct. Engrg., ASCE, 118(8), 2186–2203.
12.
Salawu, O. S. ( 1997). “Detection of structural damage through changes in frequency: A review.” Engrg. Struct., 19(9), 718–723.
13.
Stubbs, N., and Garcia, G. ( 1996b). “Application of pattern recognition to damage localization.” Microcomputers in Civ. Engrg., 11, 395–409.
14.
Stubbs, N., and Kim, J. T. ( 1996a). “Damage localization in structures without baseline modal parameters.” AIAA J., 34(8), 1644–1649.
15.
Stubbs, N., Kim, J. T., and Farrar, C. R. ( 1995). “Field verification of a nondestructive damage localization and severity estimation algorithm.” Proc., 13th Int. Modal Anal. Conf., 210–218.
16.
Stubbs, N., and Park, S. ( 1996c). “Optimal sensor placement for mode shapes via Shannon's sampling theorem.” Microcomputers in Civ. Engrg., 11, 411–419.
17.
Stubbs, N., Park, S., and Sikorski, C. ( 1997). “A general methodology to nondestructively evaluate bridge structural safety.” Tech. Rep. No. NDD 04-97-04 Submitted to State of California, Department of Transportation, Sacramento, Calif., Texas Engrg. Experimental Station, Texas A&M University, College Station, Tex.
18.
Stubbs, N., Sikorsky, C., Park, S., Choi, S., and Bolton, R. ( 1998). “A methodology to nondestructively evaluate the structural properties of bridges.” Proc., 5th CALTRANS Seismic Res. Workshop, California Department of Transportation Service Center.
19.
U.S. Department of Agriculture (USDA). ( 1999). “Wood handbook: Wood as an engineering material.” General Tech. Rep. FPL-GTR-113, Forest Product Laboratory, Madison, Wis.
20.
Weaver, W., and Gere, J. ( 1980). Matrix analysis of framed structures, 2nd Ed., Van Nostrand Reinhold, New York.
Information & Authors
Information
Published In
History
Received: Jan 8, 2000
Published online: Apr 1, 2001
Published in print: Apr 2001
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.