Exact Tangent Stiffness for Imperfect Beam-Column Members
This article has a reply.
VIEW THE REPLYPublication: Journal of Structural Engineering
Volume 127, Issue 12
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Clarke, M. J., and Bridge, R. Q. ( 1995). “The notional load approach for the design of frames.” Res. Rep. No. R718, School of Civ. and Min. Engrg., University of Sydney, Sydney.
2.
Hancock, G. J. ( 1994). “Elastic method of analysis of rigid jointed frames including second order effects.” J. Australian Inst. of Steel Contr., 28(3), 10–18.
3.
Hsiao, K. M., and Hou, F. Y. ( 1987). “Nonlinear finite element analysis of elastic frames.” Comp. Struct., 26, 693–701.
4.
Hsiao, K. M., and Lin, W. Y. ( 2000). “A co-rotational formulation for thin-walled beams with mono-symmetric open sections.” Comp. Meth. Appl. Mech. Engrg., 190, 1163–1185.
5.
Izzuddin, B. A., and Smith, D. L. (1996). “Large-displacement analysis of elastoplastic thin-walled frames. II: Verification and application.”J. Struct. Engrg., ASCE, 122(8), 915–925.
6.
Kani, I. M., and McConnel, R. E. (1987). “Collapse of shallow lattice domes.”J. Struct. Engrg., ASCE, 113(8), 1806–1819.
7.
Lui, E. M. (1992). “Geometrical imperfections on inelastic frame behavior.”J. Struct. Engrg., ASCE, 118, 1408–1415.
8.
McGuire, W., Gallagher, R. H., and Ziemian, R. ( 2000). Matrix structural analysis, Wiley, New York.
9.
McGuire, W., and Ziemian, R. ( 1988). “Discussion of `Second-order elastic analysis for frame design,' by Y. Goto and W. F. Chen.”J. Struct. Engrg., ASCE, 114, 501–503.
10.
McGuire, W., and Ziemian, R. ( 2000). “Steel frame stability: Out-of-plane effects.” Proc., 1st Int. Conf. Struct. Stability and Dyn., 7–9 December 2000, Taipei, Taiwan, Y. B. Yang, L. J. Leu, and S. H. Hsieh, eds., 5–20.
11.
Nukala, P. K. V. V. ( 1997). “Three-dimensional second-order inelastic analysis of steel frames.” PhD thesis, Purdue University, W. Lafayette, Ind.
12.
Teh, L. H. ( 2001). “Cubic elements in practical analysis and design of steel frames.” Engrg. Struct., 23, 1243–1255.
13.
Teh, L. H., and Clarke, M. J. ( 1998a). “Co-rotational and Lagrangian formulations of elastic three-dimensional beam finite elements.” J. Constr. Steel Res., 48, 123–144.
14.
Teh, L. H., and Clarke, M. J. ( 1998b). “Advanced analysis of steel frames composed of tubular sections—a preliminary case study.” Proc., 5th Pac. Struct. Steel Conf., Dong-I1 Chang et al., eds., Techno-Press, Seoul, 277–282.
15.
Teh, L. H., and Clarke, M. J. (1999). “Plastic-zone analysis of 3D steel frames using beam elements.”J. Struct. Engrg., ASCE, 125(11), 1328–1337.
16.
Teh, L. H., Hancock, G. J., and Clarke, M. J. (2001). “Analysis and design of high-rise steel pallet rack frames.”J. Struct. Engrg., ASCE (in press).
17.
Trahair, N. S. ( 1993). Flexural-torsional buckling of structures, E&FN Spon, London.
18.
Trahair, N. S., and Teh, L. H. ( 2001). “Second-order moments in torsion members.” Engrg. Struct., 23, 631–642.
19.
White, D. W., and Hajjar, J. ( 1991). “Application of second-order elastic analysis in LRFD: Research to practice.” Engrg. J., AISC, 28, 133–148.
20.
Ziemian, R. D., and McGuire, W. ( 2000). MASTAN2, Version 1.0, Wiley (distributor), New York.
21.
Ziemian, R. D., McGuire, W., and Deierlein, G. G. (1992). “Inelastic limit states design. Part I: Planar frame study.”J. Struct. Engrg., ASCE, 118(9).2532–2549
22.
Australian Standard. ( 1998). “Steel Structures,” AS-4100.
23.
British Standards Institution (BSI). ( 1990). “Structural use of steel-work in buildings.” BS5950, Part 1, London.
24.
Chan, S. L. ( 1990). “Strength of cold-formed box columns with coupled local and global buckling.” The Struct. Engr., 68(7), 125–132.
25.
Chan, S. L. ( 1996). NONLINEAR ANALYSIS of FRAMES series—Nonlinear Integrated Design and Analysis (NAF-Nida), users' manual, Dept. of Civ. and Struct. Engrg., Hong Kong Polytechnic University, Hong Kong.
26.
Chan, S. L. ( 1999). “Non-linear analysis and design of the 1300 ton Macau return-to-China memorial hall.” PteC CA031/00, consultancy report submitted to Eddie Wong and Associates.
27.
Chan, S. L. ( 2001). “Optimisation and non-linear analysis and design of the 108 storey steel-concrete composite building at West Kowloon station.” PteC RS057/01, consultancy report to Ove Arup and Partners, Hong Kong.
28.
Chan, S. L., and Zhou, Z. H. (1995). “Second-order analysis of frame using a single imperfect element per member.”J. Struct. Engrg., ASCE, 121(6), 939–945.
29.
Chan, S. L., and Zhou, Z. H. ( 1998). “On the development of a robust element for second-order `integrated analysis and design approach.”' J. Constructional Steel Res., 47(12), 169–190.
30.
Ho, W. M. G., and Chan, S. L. (1991). “Semi-bifurcation and bifurcation analysis of flexibly connected steel frames.”J. Struct. Engrg., ASCE, 117(8), 2299–2319.
31.
Liew, J. Y. R., Chen, H., Shanmugam, N. E., and Chen, W. F. ( 2000). “Improved nonlinear plastic hinge analysis of space frame structures.” Engrg. Struct., 22(10), 1324–1338.
32.
Oran, C. (1973). “Tangent stiffness in space frames.”J. Struct. Engrg., ASCE, 99(6), 987–1001.
33.
Peng, J. L., Pan, A. D. E., Chen, W. F., Yen, T., and Chan, S. L. (1997). “Structural modeling and analysis of modular falsework systems.”J. Struct. Engrg., ASCE, 123(9), 1245–1251.
34.
Teh, L. H., and Clark, M. J. ( 1998). “Co-rotational and Lagrangian formulation of elastic three-dimensional beam finite elements.” J. Constr. Steel Res., 48, 123–144.
Information & Authors
Information
Published In
History
Published online: Dec 1, 2001
Published in print: Dec 2001
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.