FEM Analysis for Hysteretic Behavior of Thin-Walled Columns
Publication: Journal of Structural Engineering
Volume 124, Issue 11
Abstract
An accurate finite-element-method-based analysis to predict the ultimate hysteretic behavior of thin-walled steel columns subjected to seismic loading is presented in this paper. For this purpose, we develop the three-surface cyclic metal plasticity model. The three-surface model includes less material parameters and internal variables for the ease of its implementation in the finite-element method analysis. This model is characterized by a discontinuous surface inserted between the yield surface and the bounding surface. The discontinuous surface is used to express the yield plateau and the change of hardening coefficient. Most material parameters in the three-surface model can be determined by the tensile coupon test. However, three parameters independent of material types are calibrated by the existing cyclic loading test results of thin-walled steel columns. This is to improve the accuracy of this analysis specifically in the simulation of the localized buckling behavior, which accompanies extremely large plastic strains.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
ABAQUS 5.5 Users Manual. (1996). HKS, Inc.
2.
Cofie, N. G., and Krawinkler, H.(1985). “Uniaxial cyclic stress-strain behavior of structural steel.”J. Engrg. Mech., ASCE, 111(9), 1105–1120.
3.
Dafalias, Y. F.(1986). “Bounding surface plasticity. I: Mathematical foundation and hypoplasticity.”J. Engrg. Mech., ASCE, 112(9), 966–987.
4.
Dafalias, Y. F., and Popov, E. P.(1976). “Plastic internal variables formalism of cyclic plasticity.”J. Appl. Mech., 43, 645–651.
5.
Fujimoto, M., Hashimoto, A., Nakagomi, T., and Yamada, T.(1985). “Study on fracture of welded connections in steel structures under cyclic loads on nonlinear fracture mechanics.”Trans. of AIJ, J. Struct. and Constr. Engrg., 356, 93–101.
6.
Goto, Y., Toba, Y., and Matsuoka, H.(1995). “Localization of plastic buckling patterns under cyclic loading.”J. Engrg. Mech., ASCE, 121(4), 493–501.
7.
Goto, Y., Wang, Q., and Obata, M. (1997). “Effect of constitutive models on the hysteretic behavior of thin-walled steel bridge piers subjected to seismic loading.”Proc., 7th Int. Conf. on Comp. in Civ. and Build. Engrg., Vol. 1, 381–386, Techno-Press, Seoul, Korea.
8.
Iwan, W. D. (1967). “On a class of model for the yielding behavior of continuous and composite system.”J. Appl. Mech. Trans., 612–617.
9.
Loret, B., and Prevost, J. H.(1986). “Accurate numerical solutions of Drucker-Prager elastic-plastic modes.”Comp. Meth. Appl. Mech. Engrg., 54, 259–278.
10.
Malvern, L. E. (1969). Introduction to the mechanics of a continuous media. Prentice-Hall, Inc., Englewood Cliffs, N.J.
11.
Minagawa, M., Nishiwaki, T., and Masuda, N.(1989). “On accuracies of uniaxial cyclic plasticity behavior prediction by multi-surface model.”Proc., JSCE, Tokyo, Japan, 6(1), 99–109.
12.
Mroz, Z.(1967). “On the description of anisotropic work hardening.”J. Mech. Phys. Solids, 15, 163–175.
13.
Nishimura, N., Ono, K., and Ikeuchi, T. (1995). “A constitutive equation for structural steels based on a monotonic loading curve under cyclic loading.”Proc., JSCE, Tokyo, Japan 513(I-31), 27–38.
14.
Nishikawa, K., Yamamoto, S., Natori, T., Terao, K., Yasunami, H., and Terada, M. (1996). An experimental study on improvement of seismic performance of existing steel bridge piers. J. Struct. Engrg., JSCE, Tokyo, Japan, 42A, 975–986.
15.
Petersson, H. and Popov(1978). “Cyclic metal plasticity: Experiments and theory.”J. Engrg. Mech. Div., ASCE, 104(6), 1371–1388.
16.
Shen, C., Mizuno, E., and Usami, T. (1993). “Development of a cyclic two-surface model for structural steels with yield plateau.”NUCE Res. Rep. No. 9302, Dept. of Civ. Engrg., Nagoya Univ., Nagoya, Japan.
17.
Simo, J. C., and Taylor, R. L.(1985). “Consistent tangent operators for rate independent elasto-plasticity.”Comp. Meth. Appl. Mech. Engrg., 48, 101–118.
18.
“Specification and commentary for highway bridges. Part V: Seismic design.” (1996). Japan Road Assn., Tokyo, Japan.
19.
Ziegler, H.(1959). “A modification of Prager's hardening rule.”Quarterly of Appl. Mathematics, 17, 55.
Information & Authors
Information
Published In
Copyright
Copyright © 1998 American Society of Civil Engineers.
History
Published online: Nov 1, 1998
Published in print: Nov 1998
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.