Establishing Rw and Cd Factors for Confined Masonry Buildings
Publication: Journal of Structural Engineering
Volume 122, Issue 10
Abstract
Seismic design provisions, including the Chilean seismic code, prescribe seismic design forces by reducing a linear elastic response spectra using a response modification factor. The codes also estimate expected maximum inelastic displacement that may occur during a severe earthquake, by amplifying the elastic displacement computed from the design seismic forces by a displacement amplification factor. In this paper, the seismic force reduction factor R w and displacement amplification factor C d are computed for typical confined masonry buildings, comparing base shear and first-story drift that develop in the structure when linear or nonlinear behavior is adopted. The computations are performed after analyzing several three and four story buildings. These buildings were subjected to the action of a number of earthquakes records obtained in Chile on March 3, 1985 and in Mexico on Sept. 19, 1985. The R w factor, evaluated for this type of building, depends both on the structure's wall density and on the source mechanism of the earthquake; in contrast to most code recommendations, the ratio of R w/C d obtained is less than 1.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
“Albañilería confinada-requisitos para el diseño y cálculo.” (1990). Norma Chilena NCh2123.c90, Instituto Nacional de Normalización, Chile.
2.
Arias, A. (1989). “Proposición de espectros de diseño para la nueva norma Chilena de diseño sísmico.”Proc., 5th Jornadas Chilenas de Sismología e Ingeniería Antisísmica, ACHISINA, Santiago, Chile, Vol. 2, 853–864 (in Spanish).
3.
Astroza, M., Saragoni, R., and Yañez, F. (1986). “El terremoto de México del 19 de Septiembre de 1985.”Proc., 4th Jornadas Chilenas de Sismología e Ingeniería Estructural, ACHISINA, Viña del Mar, Chile, Vol. 1, D-150 (in Spanish).
4.
Castro, L. (1992). “Espectro de respuesta representativa de los terremotos de Chile 1981, 1985 y 1987 diferenciados por tipo de suelo,” Civ. Engrg. thesis, Univ. of Chile, Santiago, Chile (in Spanish).
5.
Diez, J., Astroza, M., and Delfín, F. (1988). “Estudio experimental de modalidades de refuerzo para muros de albañilería de unidades cerámicas.”Jornadas en español y portugués sobre estucturas y materiales, Madrid, España, Vol. VI, 319–338.
6.
“Diseño sísmico de edificios.” (1996). Norma Chilena NCh433, Instituto Nacional de Normalización, Chile.
7.
Gómez, J. (1994). “Determinación del factor de reducción de fuerzas sísmicas para edificios de muros de albañilería confinada por efecto de la respuesta estructural,” Civ. Engrg. thesis, Univ. of Chile, Santiago, Chile.
8.
Guendelman, I. R., and Powell, G. (1977). “DRAIN TABS, A computer program for inelastic earthquake response of three dimensional buildings.”EERC-08, Univ. of California, Berkeley.
9.
Herrera, E. (1992). “Efecto de la carga vertical en el comportamiento de muros de albañilería reforzada sometidos a carga Lateral Alternada,” Civ. Engrg. thesis, Univ. of Chile, Santiago, Chile.
10.
Moroni, M. O., Astroza, M., and Tavonatti, S.(1994). “Nonlinear models for shear failure in confined masonry walls.”TMS J., 12(2), 72–78.
11.
Newmark, N. M., and Hall, W. J. (1982). “Earthquake spectra and design.”Rep., Earthquake Engrg. Res. Inst., El Cerrito, Calif.
12.
Riddell, R., Hidalgo, P., and Cruz, E.(1989). “Response modifications factors for earthquakes resistant design of short period buildings.”Earthquake Spectra, 5(3), 571–590.
13.
Saragoni, R., and Hart, G.(1974). “Simulation of artificial earthquakes.”Earthquake Engrg. and Struct. Dynamics, 2(3), 249–267.
14.
Saragoni, R., Celebi, M., Holmberg, A., and Sáez, A. (1989). “Análisis de los acelerogramas del terremoto de Chile de 1985. Segunda parte.”Proc., 5th Jornadas Chilenas de Sismología e Ingeniería Antisísmica, ACHISINA, Santiago, Chile, Vol. 1, 357–368.
15.
Uang, C. (1991). “Establishing R (or R w) and C d factors for building seismic provisions.”J. Struct. Engrg., ASCE, 117(1), 9–28.
Information & Authors
Information
Published In
Copyright
Copyright © 1996 American Society of Civil Engineers.
History
Published online: Oct 1, 1996
Published in print: Oct 1996
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.