Innovative Design of FRP Combined with Concrete: Short-Term Behavior
Publication: Journal of Structural Engineering
Volume 121, Issue 7
Abstract
The study presents the mechanics associated with the short-term behavior of glass-fiber reinforced-plastic (GFRP) box beams that include a layer of concrete and a carbon-fiber–reinforced-plastic laminate (CFRP) in the compression and the tension zone, respectively. This innovative concept results in cost-effective composite members with pseudoductile characteristics and high stiffness and strength properties. It can be thought of as a better way of producing composite structural members for simply supported spans, through an automated manufacturing technique such as pultrusion. The analytical results are verified by a series of bending tests on large-scale specimens and by the finite-element technique. The agreement between experiments and analysis was found quite satisfactory. A preliminary design procedure for the hybrid members is also presented, based on a complete set of stiffness, strength (flexural strength, web shear failure by either crushing or buckling, lateral instability), and ductility design requirements.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Ashby, M. F.(1991). “Materials and shape.”Acta Metall. Mat., United Kingdom, 39(6), 1025–1039.
2.
Bakeri, P. A. (1989). “Analysis and design of polymer composite bridge decks,” MS thesis, Dept. of Civ. Engrg., Massachusetts Inst. of Technol., Cambridge, Mass.
3.
Bank, L. C., and Mosallam, A. S. (1990). “Structural performance of a fiber reinforced plastic pultruded frame.”Proc., 8th Struct. Cong. ' 90, ASCE, New York, N.Y., 509–510.
4.
Banks, W. M., and Rhodes, J. (1983). “The instability of composite channel sections.”Composite Struct. 2: Proc., 2nd Int. Conf. on Composite Struct., Can. Soc. for Civ. Engrg., Montreal, Canada, 443– 452.
5.
Deskovic, N. (1993). “Innovative design of FRP composite members combined with concrete,” PhD thesis, Dept. of Civ. and Envir. Engrg., Massachusetts Inst. of Technol., Cambridge, Mass.
6.
Deskovic, N., Triantafillou, T. C., and Meier, U. (1991). “Innovative design of FRP composite members combined with concrete.”Res. Rep. R91-22, Dept. of Civ. Engrg., Massachusetts Inst. of Technol., Cambridge, Mass.
7.
Deskovic, N., Triantafillou, T. C., and Meier, U.(1995). “Innovative design of FRP combined with concrete: Long-term behavior.”J. Struct. Engrg., ASCE, 127(7), 1079–1089.
8.
Head, P. R. (1992). “Design methods and bridge forms for the cost effective use of advanced composites in bridges.”Proc., 1st Int. Conf. on Adv. Composite Mat. in Bridges and Struct., Can. Soc. for Civ. Engrg., Montreal, Canada, 15–30.
9.
Hollaway, L., ed. (1990). Polymers and polymer composites in construction . T. Telford, London, England.
10.
Holmes, M., and Just, D. J. (1983). GRP in structural engineering . Applied Science Publishers Ltd., London, England.
11.
Hull, D. (1981). An introduction to composite materials . Cambridge University Press, Cambridge, England.
12.
Johansen, G. E., Wilson, R., Pope, D. A., Goss, G., Ritchie, P., and Mellen, J. (1992). “Spanning `devil's pool' with a prestressed cable/FRP tube structural system.”Proc., 1st Int. Conf. on Adv. Composite Mat. in Bridges and Struct., Sherbrooke, Canada, 435–444.
13.
Knott, J. F. (1973). Fundamentals of fracture mechanics . Butterworths, London, England.
14.
McCormick, F. C. (1978). “Laboratory and field studies of a pedestrian bridge composed of glass reinforcement plastic.”Transp. Res. Rec. 665, Transp. Res. Board, Washington, D.C., 99–107.
15.
Park, R., and Paulay, T. (1975). Reinforced concrete structures . John Wiley & Sons, New York, N.Y.
16.
Plecnik, J. M., Azar, W., and Kabbara, B. (1990). “Composite applications in highway bridges.”Proc., First Mat. Engrg. Cong. ' 90, ASCE, New York, N.Y., 986–995.
17.
Sims, G. D., Johnson, A. F., and Hill, R. D. (1987). “Mechanical and structural properties of a GRP pultruded section.”Composite Struct., 8: 173–187.
18.
Starr, T. F. (1983). “Structural applications for pultruded profiles.”Composite Struct. 2: Proc., 2nd Int. Conf. on Composite Struct., 193–213.
19.
Timoshenko, S. P., and Gere, J. M. (1961). Theory of elastic stability . McGraw-Hill Book Co., New York, N.Y.
20.
Triantafillou, T. C., and Plevris, N. (1992). “Strengthening of RC beams with epoxy-bonded fibre-composite materials.”Mat. and Struct., Vol. 25, 201–211.
Information & Authors
Information
Published In
Copyright
Copyright © 1995 American Society of Civil Engineers.
History
Published online: Jul 1, 1995
Published in print: Jul 1995
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.