Strengthening of Composite Steel-Concrete Bridges
Publication: Journal of Structural Engineering
Volume 121, Issue 12
Abstract
The concept of prestressing has been used as an effective technique to strengthen composite steel-concrete girders in bridges and buildings. Although several researchers have investigated the behavior of this structural system under static loading, no one has addressed the fatigue behavior. This paper analyzes and summarizes the fatigue test data for the main constituent components of prestressed composite steel-concrete girders—strands, shear studs, and cover plates. The data are also compared with the American Association of State Highway and Transportation Officials (AASHTO) requirements. It appears that end-anchored strands for nonbonded, prestressed structures can be designed for fatigue to the AASHTO allowable stress range for category C. AASHTO's approach to designing shear studs and cover plates seems reasonable for prestressed composite girders. A companion paper presents the fatigue behavior of these elements within a prestressed composite girder.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Albrecht, P. (1983). “S-N fatigue reliability analysis of highway bridges.”Probabilistic fracture mechanics and fatigue methods; ASTM STP 798, ASTM, Philadelphia, Pa., 184–204.
2.
Albrecht, P., and Friedland, I. M.(1979). “Fatigue limit effect on variable amplitude fatigue of stiffeners.”J. Struct. Div., ASCE, 105(12), 2657–2675.
3.
Albrecht, P., and Li, W. L. (1989). “Fatigue strength of prestressed composite beams.”NTIS Rep. No. PB 89223317, Dept. of Civ. Engrg., Univ. of Maryland, College Park, Md.
4.
Albrecht, P., and Rubeiz, C. G. (1990). “Variable amplitude load fatigue, task A—literature review. Vol. III: variable amplitude fatigue behavior.”Rep. No. FHWA-RD-87-061, Federal Hwy. Admin., McLean, Va.
5.
Albrecht, P., and Simon, S.(1981). “Fatigue notch factors for structural details.”J. Struct. Div., ASCE, 107(7), 1279–1296.
6.
Albrecht, P., Li, W. L., and Saadatmanesh, H.(1995a). “Fatigue strength of prestressed composite steel-concrete bridges.”J. Struct. Engrg., ASCE, 121(12), 1850–1856.
7.
Albrecht, P., Lu, H. Y., Jung, K. S., Liu, H. J., and Cheng, J. G. (1995b). “Long-life variable-amplitude fatigue strength of welded steel bridge details.”Rep. No. FHWA-RD-94-108, Federal Hwy. Admin., McLean, Va.
8.
“Considerations for design of concrete structures subjected to fatigue loading.” (1986). Rep., ACI Committee 215, American Concrete Institute, Detroit, Mich.
9.
Cullimore, M. S. G. (1972). “The fatigue strength of high tensile steel wire cable subjected to stress fluctuations of small amplitude.”Publ., Int. Assoc. of Bridge and Struct. Engrs., Zurich, Switzerland, 49–56.
10.
Culver, C., and Coston, R.(1961). “Tests of composite beams with stud shear connectors.”J. Struct. Div., ASCE, 87(2), 1–17.
11.
Davis, R. E., and Klein, E. G. (1987). “Localized stresses in posttensioned steel girder web—field verification.”Rep., FHWA/CA/SD-87/02, California Dept. of Transp., Div. of Struct., Sacramento, Calif.
12.
Edwards, A. D., and Picard, A. (1972). “Fatigue characteristics of prestressing strand.”Proc., Inst. of Civ. Engrs., London, England, 53 (Part 2), 325–336.
13.
Fisher, J. W., Frank, K. H., Hirt, M. A., and McNamee, B. M. (1970). “Effect of weldments on the fatigue strength of steel beams.”NCHRP Rep. No. 102, Transp. Res. Board, Nat. Res. Council, Washington, D.C.
14.
“Highway bridge replacement and rehabilitation program.” (1989). Annu. Rep. of the Secretary of Transp. to the Congr. of the U.S., Bridge Div., Ofc. of Engrg., Federal Hwy. Admin., Washington, D.C.
15.
King, D. C., Slutter, R. G., and Driscoll, G. C. (1965). “Fatigue strength of 0.5-inch diameter stud shear connectors.”Rep. No. 285.6A, Fritz Engrg. Lab., Lehigh Univ., Bethlehem, Pa.
16.
Klaiber, F. W., Dunker, K. F., and Sanders, W. W.(1982). “Strengthening of single-span steel beam bridges.”J. Struct. Engrg., ASCE, 108(12), 2766–2780.
17.
LRFD bridge design specifications—SI units, 1st Ed. (1994). Am. Assoc. of State Hwy. and Transp. Officials, Washington, D.C.
18.
Mancarti, G. D. (1984). “Strengthening California steel bridges by prestressing.”Transp. Res. Rec. 950, Transp. Res. Board, Washington, D.C., 183–187.
19.
Paulson, C., Frank, K. H., and Breen, J. E. (1983). “A fatigue study of prestressing strand.”Rep. No. CTR 3-5-80-300-1, Ctr. for Transp. Res., Univ. of Texas, Austin, Tex.
20.
Saadatmanesh, H., and Albrecht, P. (1986). “Static strength of prestressed composite steel girders.” Dept. of Civ. Engrg., Univ. of Maryland, College Park, Md.
21.
Saadatmanesh, H., Albrecht, P., and Ayyub, B. M.(1989). “Design guidelines for prestressed composite beams.”J. Struct. Engrg., ASCE, 115(11), 2944–2961.
22.
Sahli, A. H., Albrecht, P., and Vannoy, D. W.(1984). “Fatigue strength of retrofitted cover plates.”J. Struct. Engrg., ASCE, 110(6), 1374–1388.
23.
Schilling, C. G., Klippstein, K. H., Barsom, J. M., and Blake, G. T. (1978). “Fatigue of welded steel bridge members under variable-amplitude loading.”NCHRP Rep. 188, Transp. Res. Board, Nat. Res. Council, Washington, D.C.
24.
Slutter, R. G., and Fisher, J. W. (1966). “Fatigue strength of shear connectors.”Hwy. Res. Rec. 147, Transp. Res. Board, Washington, D.C., 65–68.
25.
Standard specifications for highway bridges. (1992). 15th Ed., Am. Assoc. of State Hwy. and Transp. Officials, Washington, D.C.
26.
Thurlimann, B. (1958). “Composite beams with stud shear connectors.”Bull. 174, Hwy Res. Board, Nat. Res. Council, Washington, D.C.
27.
Tide, R. H. R., and VanHorn, D. A. (1966). “A statistical study of the static and fatigue properties of high strength prestressing strand.”Rep. 309.2, Fritz Engrg. Lab., Lehigh Univ., Bethlehem, Pa.
28.
Toprac, A. A. (1965). “Fatigue strength of 3/4-inch stud shear connectors.”Hwy. Res. Rec. No. 103, Nat. Res. Council, Washington, D.C., 53–77.
29.
Troitsky, M. S. (1990). Prestressed steel bridges . Van Nostrand Reinhold, New York, N.Y.
30.
Warner, R. F., and Hulsbos, C. L. (1966). “Probable fatigue life of pre-stressed concrete beams.”J. Prestressed Concrete Inst., 11(2), 16–39.
Information & Authors
Information
Published In
Copyright
Copyright © 1995 American Society of Civil Engineers.
History
Published online: Dec 1, 1995
Published in print: Dec 1995
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.