Buckling Fire Endurance of Steel Columns
Publication: Journal of Structural Engineering
Volume 119, Issue 6
Abstract
Basic information on a temperature collapse of a building structure in fire can be obtained after fire‐endurance tests are carried out in special furnaces. The results of fire tests alone do not give rise to formulate the general rules that govern the process of building structure collapse in fire. It is therefore necessary to make a theoretical analysis of these tests. This may also be worthwhile for economical reasons, since the preparation and performing of the fire tests lasts several days and is rather expensive. In this paper, the differential equation of buckling steel columns during fire has been both formulated and solved. Rigidities and fire resistances of the columns have been also derived. The presented analysis of columns is based on a nonelastic model of steel and considers steel creep. With the help of proposed method it is possible to predict the results of fire‐endurance tests on given steel columns and generalize these results over the columns under different static diagrams, lengths, and loadings.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Allen, D. (1978). “Merchant‐Rankine approach to member stability.” J. Struct. Div., ASCE, 104(12), 1909–1914.
2.
Anderberg, Y. (1983). “Behaviour of steel at high temperatures.” Report LUTVDG/TVBB‐3008, Div. Bldg. Fire Safety and Technology, Lund, Sweden.
3.
Aribert, J.‐M., and Abdel Azis, K. (1987). “Simulation du comportement à l'incendie de poteaux comprimés et fléchis en présence de gradients quelconques de température.” Construction Métallique, (2), 3–40 (in French).
4.
Aribert, J.‐M., and Randriantsara, C. (1983). “Sur une modélisation du flambement des poteaux métalliques dans des conditions d'incendie.” Rapport Préliminaire, CTICM, Troisième Colloque International sur la Stabilité des Structures Métalliques, Paris, France, 157–165 (in French).
5.
Cheng, W. C., and Mak, C. K. (1975). “Computer analysis of steel frame in fire.” J. Struct. Div., ASCE, 101(4), 855–867.
6.
Eggwertz, S. (1976). “Creep buckling of steel column at elevated temperatures.” 10th Congress Behaviour of Building Structures under Fire Effects, IABSE, 235–240.
7.
Eggwertz, S. (1977). “Creep buckling of a steel column in a temperature‐time history simulating a fire.” 10th Congress Behaviour of Building Structures under Fire Effects, IABSE, 189–192.
8.
Furumura, F., and Ave, T. (1984). “Creep buckling of steel columns at high temperatures. Part I: Development of creep buckling test apparatus.” J. Struct. Const. Engrg., (344), 164–173.
9.
Furumura, F., Ave, T., and Kim, W. J. (1986). “Creep buckling of steel columns at high temperatures. Part II: Creep buckling tests and numerical analysis.” J. Struct. and Constr. Engrg., (361), 142–151.
10.
Fujimoto, M., Furumura, F., and Ave, T. (1981). “Primary creep of structural steel (SM 50 A) at high temperatures.” J. Struct. Constr. Engrg., (306), 148–156.
11.
Harmathy, T. Z. (1967). “A comprehensive creep model.” J. Basic Engrg., 89, 469–502.
12.
Harmathy, T. Z. (1976). “Creep deflection of metal beams in transient heating processes, with particular reference to fire.” Canadian J. Civ. Engrg., 3(2), 219–228.
13.
Harmathy, T. Z., and Stanzak, W. W. (1970). “Elevated‐temperature tensile and creep properties of some structural and prestressing steels.” Spec. Tech. Publ. No. 464, Am. Soc. Test. Mater., Philadelphia, Pa., 186–208.
14.
Kruppa, J. (1981). “Properties and service performance. Fire‐resistance of external steel columns.” Final Rep. EUR 6731 EN, Commission of the European Communities, Brussels‐Luxembourg.
15.
Lie, T. T. (1972). Fire and Buildings. Appl. Sci. Publishers Ltd., London, England.
16.
Lie, T. T., and Macaulay, B. A. (1989). “Evaluation of the fire resistance of protected steel columns.” Internal Rep. No. 583, Institute for Research in Construction, NRCC, Ottawa, Canada.
17.
Merchant, W. (1954). “The failure load of rigidly jointed frame works as influenced by stability.” Struct. Engr., 32, 185.
18.
Murzewski, J. (1977). “Joint probability of elastic and plastic instability modes.” Proc., Regional Colloquium on Stability of Steel Structures, Budapest‐Balatonfüred, Hungary, 249–268.
19.
Murzewski, J. (1990). “Creep buckling of steel columns in fire temperatures.” Mechanika Teoretyczna i Stosowana, 28(1–2), 141–148.
20.
Rondal, J., and Maquoi, R. (1979). “Formulations d'Ayrton‐Perry pour le flambement des barres métalliques.” Construction Métallique, (4), 41–53 (in French).
21.
Skinner, D. H. (1972). “Determination of high temperature properties of steel.” BHP Tech. Bull., 16(2), 10–21.
22.
Skowroński, W. (1988). “A study of the steel beam deformation during fire.” Bldg. Envir., 23(2), 159–167.
23.
Skowroński, W. (1989). “Material characteristics in the analysis of heated steel beams.” Fire Mater., 14(3), 107–116.
24.
Skowroński, W. (1990). “Load capacity and deflection of fire‐resistant steel beams.” Fire Tech., 26(4), 310–328.
25.
“Standard methods of fire endurance tests of building constructions and materials.” (1982). CAN4‐S 101‐M82, Underwriters' Laboratories of Canada, Scarborough, Ontario, Canada.
26.
“Standard methods of fire tests of building construction and materials.” (1983). ANSI/ASTM E 199‐83, ASTM, Philadelphia, Pa. 349–375.
27.
Thor, J. (1971). “Krypningens inverkan på stälbalkars bårförmåga vid brand.” Byggmästaren, (9), 14–19 (in Swedish).
28.
Thor, J., Pettersson, O., and Magnusson, S. E. (1977). “A rational approach to fire engineering design of steel buildings.” Engrg. J., 14(3).
29.
Williams‐Leir, G. (1983). “Creep of structural steel in fire: analytical expressions.” Fire Mater., 7(2), 73–78.
Information & Authors
Information
Published In
Copyright
Copyright © 1993 American Society of Civil Engineers.
History
Received: Sep 11, 1991
Published online: Jun 1, 1993
Published in print: Jun 1993
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.