Reliability‐Based Service‐Life Assessment of Aging Concrete Structures
Publication: Journal of Structural Engineering
Volume 119, Issue 5
Abstract
Concrete structures may be affected by aging or changes in strength and stiffness beyond the baseline conditions assumed for design. These changes may impair the safety and serviceability of the structure, and should be considered as part of the process by which a structure is evaluated for continued future service. Methods are being developed using structural reliability principles to evaluate time‐dependent reliability of reinforced or prestressed concrete structures. These methods enable the impact on safety and serviceability of uncertainties in loading conditions, structural strength, and strength degradation due to aggressive environmental Stressors to be assessed qualitatively. Parametric analyses show that the reliability is sensitive to the choice of initial component strength and strength degradation models. Less sensitivity is found to correlate component strengths within a system. Identification of the critical components before performing system reliability analysis is important in reducing the size of the analysis. The role of periodic inspection and maintenance in enabling a target reliability level to be met over a period of continued service also is considered.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Al‐Tayyib, A.‐H. J., and Khan, M. S. (1988). “Corrosion rate measurements of reinforcing steel in concrete by electrochemical techniques.” ACI Mat. J., 85(3), 172–177.
2.
“Building code requirements for reinforced concrete.” (1989). ACI Standard 318‐89, American Concrete Institute (ACI), Detroit, Mich.
3.
Clifton, J. R., and Knab, L. I. (1989). “Service life of concrete.” NUREG/CR‐5466, National Bureau of Standards, U.S. Nuclear Regulatory Commission, Washington, D.C.
4.
“Code requirements for nuclear safety related concrete structures.” (1976). ACI Standard 349‐76, American Concrete Institute (ACI), Detroit, Mich.
5.
Dhir, R. K., Hewlett, P. C., and Chan, Y. N. (1989). “Near‐surface characteristics of concrete: Prediction of carbonation resistance.” Mag. of Concrete Res., 41(148), 137–143.
6.
Ellingwood, B., and Hwang, H. (1985). “Probabilistic descriptions of resistance of safety‐related structures in nuclear plants.” Nuclear Engrg. and Design, 88(2), 169–178.
7.
Ellingwood, B., and Mori, Y. (1990). “Probabilistic methods for condition assessment and life prediction of concrete structures in nuclear power plants.” Proc., Water Reactor Safety Information Meeting; NUREG/CP‐0114, U.S. Nuclear Regulatory Commission, Washington, D.C., Vol. 3, 553–577.
8.
Ellingwood, B., and Mori, Y. (1992). “Condition assessment and reliability‐based life prediction of concrete structures in nuclear plants.” Rep. ORNL/NRC/LTR‐92/4, Oak Ridge National Laboratory, Oak Ridge, Tenn.
9.
Hwang, H., Ellingwood, B., Shinozuka, M., and Reich, M. (1987). “Probability‐based design criteria for nuclear plant structures.” J. Struct. Engrg., ASCE, 113(5),925–942.
10.
Israel, M., Ellingwood, B., and Corotis, R. B. (1987). “Reliability‐based code formulations for reinforced concrete buildings.” J. Struct. Engrg., ASCE, 113(10), 2235–2252.
11.
Kameda, H., and Koike, T. (1975). “Reliability analysis of deteriorating structures.” Reliability Approach in Struct. Engrg., Maruzen Co., Tokyo, Japan, 61–76.
12.
MacGregor, J. G., Mirza, S. A., and Ellingwood, B. (1983). “Statistical analysis of resistance of reinforced and prestressed concrete members.” ACI J., 80(3), 167–176.
13.
McKay, M. D., Conover, W. J., and Beckman, R. J. (1979). “A comparison of three methods for selecting values of input variables in the analysis of output froma computer code.” Technometrics, 21(2), 239–245.
14.
Melchers, R. E. (1987). Structural reliability; analysis and prediction. Ellis Horwood Ltd., West Sussex, England.
15.
Melchers, R. E. (1990). “Search‐based importance sampling.” Struct. Safety, 9, 117–128.
16.
Meyers, B. L., and Daye, M. A. (1987). “PWR containment aging under service environment.” Trans. 9th Int. Conf. on Struct. Mech. in Reactor Technol., D, 235–240.
17.
Mori, Y. (1992). “Reliability‐based condition assessment and life prediction of concrete structures,” PhD thesis, Johns Hopkins University, Baltimore, Md.
18.
Naus, D. J. (1986). “Concrete component aging and its significance relative to life extension of nuclear power plant.” Report No. NUREG/CR‐4652, Oak Ridge National Laboratory, Oak Ridge, Tenn.
19.
Oswald, G. F., and Schueller, G. I. (1984). “Reliability of deteriorating structures,” Engrg. Fracture Mech., 20(3), 479–488.
20.
“Prediction of service life of building materials and components.” (1987). CIB W80/RILEM 71‐SPL; Final Rep., Mat. and Struct. 20, CIB, 55–77.
21.
Rubinstein, R. Y. (1981). Simulation and the Monte Carlo method. John Wiley and Sons, Inc., New York, N.Y.
22.
Siemes, A. J. M., Vrouwenvelder, A. C. W. M., and van den Beukel, A. (1985). “Durability of buildings: A reliability analysis.” Heron, 30(3), 1–48.
23.
Taylor, H. M., and Karlin, S. (1984). An introduction to stochastic modeling. Academic Press, Orlando, Fla.
24.
Thoft‐Christensen, P., and Baker, M. J. (1982). Structural reliability theory and its application. Springer‐Verlag, New York, N.Y.
25.
Thoft‐Christensen, P., and Sorensen, J. D. (1982). “Reliability of structural systems with correlation elements.” Appl. Mathematical Modeling, 6, 171–178.
26.
Thoft‐Christensen, P., and Sorensen, J. D. (1987). “Optimal strategy for inspection and repair of structural systems.” Civ. Engrg. Syst., 4(Jun.), 94–100.
27.
Tuutti, K. (1982). Corrosion of steel in concrete. Swedish Cement and Concrete Research Institute, Stockholm, Sweden.
28.
Verma, D., Fu, G., and Moses, F. (1989). “Efficient structural system reliability assessment by Monte Carlo Methods.” Proc., ICOSSAR '89, ASCE, New York, N.Y., 895–901.
29.
Vesikari, E. (1988). “Service life of concrete structures with regard to corrosion of reinforcement.” Res. Reports, Espoo, Finland.
30.
Wen, Y. (1977). “Statistical combination of extreme loads.” J. Struct. Div., ASCE, 103(6), 1079–1093.
Information & Authors
Information
Published In
Copyright
Copyright © 1993 American Society of Civil Engineers.
History
Received: Jul 9, 1992
Published online: May 1, 1993
Published in print: May 1993
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.