Complete Biaxial Load‐Deformation Behavior or RC Columns
Publication: Journal of Structural Engineering
Volume 118, Issue 9
Abstract
A numerical analysis is presented for the determination of complete load‐moment‐curvature‐deflection relationships for both short and slender reinforced concrete columns under combined biaxial flexure and axial load. The computer method developed can be used for any end conditions and variable section geometries such as circular and rectangular (solid and hollow), cellular, oval, channel and T‐sections. Bending of the column is assumed to take place about principal axes of the cross section. The analysis takes into account an inelastic action and addresses all stages of behavior up to and beyond maximum load and moment. The method is also applicable to cases in which the cross section of the column is made up of different materials, where the cross section varies along the length of the column, and where prestressing and residual stresses are present. A comparison of the present analysis with experimental tests of biaxially loaded columns is examined. The computer analysis appears to show good correlation with experimental results obtained in this study, as well as those of others.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Al‐Noury, S. I., and Chen, W. F. (1982). “Finite segment method for biaxially loaded RC columns,” J. Struct. Engrg., ASCE, 108(4), 780–799.
2.
Barnard, P. R. (1965). “The collapse of reinforced concrete beams.” Proc. Int. Symp., Flexural Mechanics of Reinforced Concrete, ACISP‐12, American Concrete Institute, Detroit, Mich., 501–520.
3.
Basu, A. K., and Suryanarayana, P. (1975). “Analysis of restrained concrete columns under biaxial bending.” ACI Pub. SP‐50, Reinforced Concrete Columns, American Concrete Institute, Detroit, Mich .,211–232.
4.
Chen, W. F., and Shoraka, M. T. (1975). “Tangent stiffness method for biaxial bending of reinforced concrete columns.” Int. Assoc. for Bridge and Struct. Engrg., 35‐I, 23–44.
5.
Farah, A., and Huggins, M. W. (1969). “Analysis of reinforced concrete columns subjected to longitudinal load and biaxial bending.” ACI J., 66(7), 569–575.
6.
Furlong, R. W. (1979), “Concrete columns under biaxial eccentric thrust.” ACI J., 76(10), 1093–1118.
7.
Hsu, C. T. (1974). “Behavior of structural concrete subjected to biaxial flexure and axial compression,” thesis presented to McGill University at Montreal, Canada, in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
8.
Hsu, C. T. T. (1985). “Biaxially loaded L‐shaped reinforced concrete columns.” J. Struct. Engrg., ASCE, 111(12), 2576–2595, Errata, 114(11), 2629 (1988).
9.
Hsu, C. T. T. (1987). “Channel shaped reinforced concrete compression members under biaxial bending.” ACI Struct. J., 84(3), 201–211, Errata, 85(3), 240 (1988).
10.
Hsu, C. T. T. (1989). “Tee‐shaped reinforced concrete members under biaxial bending and axial compression.” ACI Struct. J., ACI, 86(4), 460–468.
11.
Hsu, C. T., and Mirza, M. S. (1973). “Structural concrete biaxial bending and compression.” J. Struct. Div., ASCE, 99(2), 285–290.
12.
Hsu, C. T. T., and Mirza, M. S. (1980). “Non‐linear behavior and analysis of reinforced concrete columns under combined loadings.” SM Study No. 14, Nonlinear design of concrete structure, Univ. of Waterloo Press, Waterloo, Ontario, Canada, 109–135.
13.
Mattock, A. H. (1959). “Redistribution of design bending moment in reinforced concrete continuous beams.” D.30, Portland Cement Assoc., Skokie, Ill.
14.
Mavichak, V., and Furlong, R. W. (1976). “Strength and stiffness of reinforced concrete columns under biaxial bending.” Research Report 7‐2F, Center for Highway Research, The University of Texas at Austin, Austin, Tex.
15.
Poston, R. W. (1986). “Nonlinear analysis of concrete bridge piers.” J. Struct. Engrg., ASCE, 112(9), 2057–2065.
16.
Poston, R. W., Breen, J. E., and Roesset, J. M. (1985a). “Analysis of nonprismatic or hollow slender concrete bridge piers.” ACI J., 82(5), 731–739.
17.
Poston, R. W., Gilliam, T. E., Yamamoto, Y., and Breen, J. E. (1985b). “Hollow concrete bridge pier behavior.” ACI J., 82(6), 779–787.
18.
Rotter, J. M. (1985). “Rapid exact inelastic biaxial bending analysis.” J. Struct. Engrg., ASCE, 111(12), 2659–2674.
19.
Roy, H. E. H., and Sozen, M. A. (1965). “Ductility of concrete.” Proc., Int. Symp., Flexural Mechanics of Reinforced Concrete, ACI SP‐12, American Concrete Institute, Detroit, Mich., 213–236.
20.
Santathadaporn, S., and Chen, W. F. (1972). “Tangent stiffness method for biaxial bending.” J. Struct. Div., ASCE, 98(1), 152–163.
21.
Wang, G., and Hsu, C. T. T. (1990). “Complete load‐deformation behavior of biaxially loaded RC columns.” Technical Report Structural Series, No. 90‐2, Dept. of Civil and Environmental Engineering, New Jersey Institute of Technology, Newark, N.J.
22.
Yu, C. W., and Hognestad, E. (1958). “Review of limit design for structural concrete.” J. of Struct. Div., ASCE, 84(8), 1878.
Information & Authors
Information
Published In
Copyright
Copyright © 1992 ASCE.
History
Published online: Sep 1, 1992
Published in print: Sep 1992
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.