Behavior and Design of Large‐Capacity Moment End Plates
Publication: Journal of Structural Engineering
Volume 116, Issue 3
Abstract
Finite element modeling is used to develop prediction equations characterizing the general behavior of extended stiffened end‐plate connections that can be used for heavier beams in steel building frames. Salient features of the finite element mesh configuration used, modeling of the nonlinear material behavior, and the analysis procedure are presented. This is followed by the details of the parametric study conducted to collect data and perform the regression analyses required to develop the prediction equations. Experimental test results are also presented that were used to validate and modify the finite element modeling, and also to confirm the results obtained from the prediction equations. Finally, a design methodology is outlined using the prediction equations.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Ahuja, V. (1982). “Analysis of stiffened end‐plate connections using the finite element method,” thesis presented to the University of Oklahoma, at Norman, Okla., in partial fulfillment of the requirements for the degree of Master of Science.
2.
Douty, R. T., and McGuire, W. (1965). “High strength bolted moment connections.” J. Struct. Div., ASCE, 91(2), 101–128.
3.
Draper, N. R., and Smith, H. (1981). Applied regression analysis. John Wiley and Sons, New York, N.Y.
4.
Fisher, J. W., and Struik, J. H. A. (1974). Guide to design criteria for bolted and riveted joints. John Wiley and Sons, New York, N.Y., 250–302.
5.
Kato, B., and McGuire, W. (1973). “Analysis of T‐stub flange‐to‐column connections.” J. Struct. Div., ASCE, 99(5), 865–888.
6.
Kennedy, N. A., Vinnakota, S., and Sherbourne, A. N. (1981). “The split‐tee analogy in bolted splices and beam‐column connections.” Joints in structural steelwork, Pentach Press, London, England, 2.138–2.157.
7.
Krishnamurthy, N. (1978a). “Analytical investigation of bolted stiffened tee stubs.” Report #CE‐MBMA‐1902, Dept. of Civil Engineering, Vanderbilt Univ., Nashville, Tenn.
8.
Krishnamurthy, N. (1978b). “Fresh look at bolted end‐plate behavior and design.” Engrg. J., Am. Inst. of Steel Constr. (AISC), 15(2), 39–49.
9.
Levy, S. (1971). “3‐D isoparametric finite element program.” Report No. 71‐C‐191, General Electric Company, Schenectady, N.Y.
10.
Mann, A. P., and Morris, L. J. (1979). “Limit design of extended end‐plate connections.” J. Struct. Div., ASCE, 105(3), 511–526.
11.
Manual of Steel Construction. (1980). 8th Ed., Amer. Inst. of Steel Constr. (AISC), Chicago, Ill.
12.
Nair, R. S., Birkemoe, P. C., and Munse, M. H. (1974). “High strength bolts subject to tension and prying.” J. Struct. Div., ASCE, 100(2), 351–372.
13.
Specification for the Design, Fabrication and Erection of Structural Steel for Buildings. (1978). Amer. Inst. of Steel Constr. (AISC), Chicago, Ill., Aug.
14.
Turner, M. J., et al. (1956). “Stiffness and deflection analysis of complex structures.” J. Aeronaut. Sci., 23, 815–824.
15.
Zoetemeijer, P. (1974). “A design method for the tension side of statically loaded, bolted beam‐to‐column connections.” Heron, 20(1), 1–59.
Information & Authors
Information
Published In
Journal of Structural Engineering
Volume 116 • Issue 3 • March 1990
Pages: 809 - 828
Copyright
Copyright © 1990 ASCE.
History
Published online: Mar 1, 1990
Published in print: Mar 1990
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.