Design Interaction Equations for Steel Members
Publication: Journal of Structural Engineering
Volume 115, Issue 7
Abstract
Most of the steel design specifications have two equations for stability and strength check of structural members. This approach has two weaknesses. The first weakness is that if the length of a member is reduced to zero in the stability interaction equation, it does not always reduce to the strength interaction equation. As a result, the transition from long to short members is not smooth. The non‐smooth transition makes the design equations unconservative in the transition region and overly conservative in the rest of region. Secondly, the stability equation is based on the concept of moment amplification factor. This amplification factor, by definition, should not be less than unity. However, in order to combine properly the amplification factor with the strength equation, these specifications allow the moment amplification factor to be less than unity. To eliminate these weaknesses, a single design equation for both strength and stability check is desirable. This paper presents a logical method of deriving a single design equation to satisfy both strength and stability criteria.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Austin, W. J. (1961). “Strength and design of metal beam‐columns.” J. Struct. Div., ASCE, 87(4), 1–32.
2.
Baker, L., and Heyman, J. (1980). Plasic design of frames: Fundamentals. Cambridge Univ. Press, Cambridge, U.K.
3.
Chen, W. F., and Han, D. J. (1985). Tubular members in offshore structures, Pitman, London, U.K.
4.
Chen, W. F., and Lui, E. M. (1987). Structural stability: Theory and implementation. Elsevier Sci. Publishing Co., New York, N.Y.
5.
Chen, W. F., and Ross, D. A. (1977). “Tests of fabricated tubular columns.” J. Struct. Div., ASCE, 103(3), 619–634.
6.
Chen, W. F., and Toma, S. (1979). “Effect of external pressure on the axial capacity of fabricated tubular columns.” Final Rept, submitted to Exxon Production Res., Houston, Tex., Struct. Engrg. Rept. No. CE‐STR‐79‐1, Purdue Univ., West Lafayette, Ind.
7.
Chen, W. F., and Zhou, S. (1987). “ factor in load and resistance factor design.” J. Struct. Engrg., ASCE, 113(8), 1738–1754.
8.
Duan, L., and Chen, W. F. (1989). “Design interaction equation for steel beamcolumns.” J. Struct. Engrg., ASCE, 115(5), 1225–1243.
9.
Ellis, J. S. (1958). “Plastic behavior of compression members.” Trans., Engrg. Inst. of Canada, 2(2), 49–60.
10.
Galambos, T. V., and Ketter, R. L. (1961). “Columns under combined bending and thrust.” Trans., ASCE, 126(1), 1–25.
11.
Ketter, R. L. (1961). “Further studies on the strength of beam‐columns.” J. Struct. Div., ASCE, 87(6), 135–152.
12.
Load and resistance factor design specification for structural steel buildings. (1986). Amer. Inst. of Steel Constr., Chicago, Ill.
13.
Recommended practice for planning, designing and constructing fixed offshore platforms. (1987). 17th Ed., API‐RP‐2A, Amer. Petroleum Inst., Washington, D.C.
14.
Salmon, C. G., and Johnson, J. E. (1980). Steel structures: Design and behavior. 2nd Ed., Harper & Row, New York, N.Y.
15.
Sohal, I. S., and Chen, W. F. (1987). “Local buckling and sectional behavior of fabricated tubes.” J. Struct. Engrg., ASCE, 113(3), 519–533.
16.
Specification for the design, fabrication and erection of structural steel for buildings. (1978). Amer. Inst. of Steel Constr., Chicago, Ill.
17.
Tebedge, N., and Chen, W. F. (1974). “Design criteria for H‐columns under biaxial loading.” J. Struct. Div., ASCE, 100(3), 579–598.
18.
Toma, S., and Chen, W. F. (1979). “Analysis of fabricated tubular columns.” J. Struct. Div., ASCE, 105(11), 2343–2363.
Information & Authors
Information
Published In
Copyright
Copyright © 1989 ASCE.
History
Published online: Jul 1, 1989
Published in print: Jul 1989
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.