Limitations of Type II Models for Seismic Hazard
Publication: Journal of Structural Engineering
Volume 115, Issue 4
Abstract
The use of the Type II distribution of extremes for seismic hazard is examined using simple examples. The sensitivity of the predicted reliabilities are examined with respect to structural strength and limiting earthquake magnitude.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Algermissen, S. T., and Perkins, D. M. (1976). “Probabilistic estimates of maximum acceleration in rock in the contiguous United States.”, U.S. Geological Survey, Reston, Va.
2.
American national standard building code requirements for the minimum design loads in buildings and structures. ANSI-A58-82, Amer. Natl. Standards Inst., New York, N.Y.
3.
Cornell, C. A. (1977). “Engineering seismic risk analysis.” Bull. Seismol. Soc. Am, 58(5), 1583–1606.
4.
Ellingwood, B., Galambos, T. V., MacGregor, J. G., and Cornell, C. A. (1980). “Development of a probability based load criterion for American National Standard A58.” NBS Special Publication 577, Natl. Bureau of Standards, Gaithersburg, Md.
5.
Madsen, H. O. (1986). “Theoretical manual for PROBAN: The PROBabilistic ANalysis Program.” Research Report No. 86-2036, A. S. Veritas, Høvik, Norway.
6.
Madsen, H. O., Krenk, S., and Lind, N. C. (1986). Methods of Structural Safety, Prentice Hall, Englewood Cliffs, N.J.
7.
Main, I. G., and Burton, P.W. (1981). “Rates of crustal deformation inferred from seismic moment and Gumbel's third distribution of extreme magnitude values.” Proceedings, Earthquakes and Earthquake Engineering: the Eastern United States, Knoxville, Tenn.
8.
O'Connor, J. M. (1987). “Reliability of nonlinear structures with seismic loading.” J. Struct. Engrg., ASCE, 133(5), 1011–1028.
9.
Shah, H. C. (1979). “Earthquake engineering and seismic risk analysis.” The John A. Blume Earthquake Engrg. Ctr., Dept. of Civ. Engrg., Stanford, Univ.
10.
Turkstra, C. J., Tallin, A. G., and Brahimi, M. (1986). “Seismic risk analysis for codified structural design.” Proceedings, The Third U.S. Nat. Conference on Earthquake Engrg., Charleston, S.C.
Information & Authors
Information
Published In
Copyright
Copyright © 1989 ASCE.
History
Published online: Apr 1, 1989
Published in print: Apr 1989
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.