Connections between Precast Elements—Failure Outside Connection Region
Publication: Journal of Structural Engineering
Volume 115, Issue 2
Abstract
The performance of moment‐resisting connections between precast columns and precast partially prestressed beams was investigated. The specimens represented exterior beam‐column joints. The only variable among the specimens was the type of connection used. The four connection types considered were: posttensioned (BMA); threaded rebar (BMB); composite‐post‐tensioned in the bottom of the beam with a cast‐in‐place top (BMC); and welded (BMD). The structures were designed to develop a primary plastic hinge in the beams outside of the connection region (at 35 in. from the column face) where the prestressing strands were considered fully developed. All of the structures were subjected to identical cyclic lateral load histories. The connections were evaluated based on their performance in terms of strength, ductility and energy dissipation characteristics, as well as, their fabrication feasibility. Of the connection types tested, the most promising details were the threaded rebar and composite connections.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Amu, O. O., and French, C. W. (1985). “Moment resistant connections in precast structures subjected to cyclic lateral loads.” Struc. Res. Report No. 87‐07, Dept. of Civ. and Min. Engrg., Univ. of Minnesota, Minneapolis, Minn.
2.
“Building code requirements for reinforced concrete.” (1983). (ACI318‐83). Amer. Concr. Inst., ACI Comm. 318, Detroit, Mich.
3.
Darwin, D., and Nmai, C. (1986). “Energy dissipation in RC beams under cyclic load.” J. Struct. Engrg., ASCE, 112(8), 1829–1846.
4.
Fintel, M. (1977). “Performance of precast concrete structures during Rumanian earthquake of March 4, 1977.” Prestr. Concr. Inst. J., 22(2), 10–16.
5.
Hafner, M. J., and French, C. W. (1986). “Moment resistant connections between precast elements subjected to cyclic lateral loads.” Struc. Res. Report No. 87‐09, Dept. of Civ. and Min. Engrg., Univ. of Minnesota, Minneapolis, Minn.
6.
Hognestad, E. (1951). “A study of combined bending and axial load in reinforced concrete members.” Bull. Series No. 399, Univ. of Illinois Engrg. Exp. Station, Urbana, Ill.
7.
Jayashankar, V., and French, C. W. (1987). “An interior moment resistant connection between precast elements subjected to cyclic lateral loads.” Struc. Res. Report No. 87‐10, Dept. of Civ. and Min. Engrg., Univ. of Minnesota, Minneapolis, Minn.
8.
Kunze, W. E., Sbarounis, S. A., and Amrhein, J. E. (1965). “The March 27 Alaskan earthquake—effects on structures in Anchorage.” J. Am. Concr. Inst., 62(6), 635–649.
9.
Kunze, W. E., Sbarounis, S. A., and Amrhein, J. E. (1965). “Behavior of prestressed concrete structure during the Alaskan earthquake.” Prestr. Concr. Inst. J., 10(2), 80–91.
10.
Lew, H. S., Leyendecker, E. V., and Dikkers, R. D. (1971). “Engineering aspects of the 1971 San Fernando earthquake.” Bldg. Sci. Series 40, U.S. Dept. of Cormmerce, Nat. Bureau of Standards Bldg. Res. Div., Gaithersburg, Md.
11.
Martin, L. D., and Korkosz, W. J. (1982). “Connections for precast concrete buildings including earthquake resistance.” Technical Report No. 2, Prestr. Concr. Inst., Chicago, Ill.
12.
Mattock, A. H., Kriz, L. B., and Hognestad, E. (1961). “Rectangular concrete stress distribution in ultimate strength design.” J. Am. Concr. Inst., 57(8), 875–926.
13.
Paulay, T., and Park, R. (1984). “Joints in reinforced concrete frames designed for earthquake resistance.” Res. Report No. 84‐9, Univ. of Canterbury, Christchurch, New Zealand.
14.
Post‐tensioning manual. (1985). Post‐Tens. Inst., 4th ed., Phoenix, Ariz.
15.
“Recommendations for design of beam‐column joints in monolithic reinforced concrete structures.” (1985). (ACI 352‐85). Amer. Concr. Inst., ACI‐ASCE Comm. 352, Detroit, Mich.
16.
Sutherland, W. M. (1965). “Prestressed concrete earthquake resistant structures—development, performance, and current research,” Proc., Third World Conf. on Eqke. Engrg., 3, IV463–IV494.
17.
Tarzikhan, C., and French, C. W. (1987). “Welded and composite connections between precast elements subjected to cyclic lateral loads.” Struc. Res. Report No. 87‐08, Dept. of Civ. and Min. Engrg., Univ. of Minnesota, Minneapolis, Minn.
18.
“Tentative provisions for the development of seismic regulations for buildings.” (1978). (ATC 3‐06). Appl. Tech. Council/Struct. Engrs. Assoc. of California, Palo Alto, Calif.
19.
Thompson, K. J., and Park, R. (1978). “Stress‐strain models for grade 275 reinforcing steel with cyclic loading.” Bull. New Zealand Nat. Soc. Earthquake Engrg., 11(2), 101–109.
20.
Thompson, K. J., and Park, R. (1980). “Ductility of prestressed and partially prestressed concrete beam sections.” Prestr. Concr. Inst. J., 25(2), 46–70.
Information & Authors
Information
Published In
Copyright
Copyright © 1989 ASCE.
History
Published online: Feb 1, 1989
Published in print: Feb 1989
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.