Designing Structures for Snow Loads
Publication: Journal of Structural Engineering
Volume 115, Issue 2
Abstract
Historical information, research results, and codes/standards provide the basis for a profile of snow load design practices in North America. Canada prescribes 30‐year mean recurrence interval (mri) ground snow using a Gumbel distribution, whereas the United States is adopting 50‐year mri ground snow modeled with a lognormal distribution. Ground‐to‐roof conversion factors are described with reference to the Canadian studies (1956–1967) and the nation‐wide measurements used in writing the 1982 standard for American National Standards Institute. Various field investigations revealed the effects on roof snow accumulations of roof exposure to wind and sun, roof geometry, roof cladding, and building thermal losses. We describe similarities in the three major model building codes, plus standards, in the United States, and the code of Canadian. Critical research needs on snow loads are also explained.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
American national standard—Minimum design loads for buildings and other structures. (1982). A58.1‐1982, American National Standards Inst., New York, N.Y.
2.
Depts. of the Army and the Air Force. (1986). “Load assumptions for buildings.” TM 5‐809‐ 1/AFM88‐3, Washington, D.C.
3.
Boyd, D. W. (1961). “Maximum snow depths and snow loads on roofs in Canada,” Proc. 29th Annu. Meet. West. Snow Conf., Res. Pap. 142, Div. Build. Res. NRC 6312, NRCC, Ottawa, Ont., 6–16.
4.
The BOCA basic/national building code. (1987). Building Officials & Code Administrators International, Inc., Ninth Ed., Country Club Hills, Ill.
5.
Brown, J. W. (1979). “An approach to snow load evaluation.” Proc. 38th Annu. Meet. West. Snow Conf., Sparks, Nev.
6.
Ellingwood, B., and Redfield, R. (1983). “Ground snow loads for structural design.” J. Struct. Engrg., ASCE, 109(4), 950–964.
7.
Elliott, M. (1981). “Snow load data for Arizona.” Structural Engineers Association of Arizona, Tucson, Ariz.
8.
Irwin, P. A. (1987). “Prediction of snow loading on large roofs,” Proc. 7th Intl. Conf. on Wind Engrg., Aachen, Germany.
9.
Isyumov, N., and Davenport, A. G. (1974). “A probabilistic approach to the prediction of snow loads.” Can. J. Civ. Engrg., 1, (Sept.) 28–49.
10.
Lutes, D. A., and Schriever, W. R. (1971). “Snow accumulations in Canada: Case histories: II,” Tech. Paper 339, Div. Build. Res., NRCC No. 11915, Nat. Res. Counc. Can., Ottawa, Ont., 1–17.
11.
Meehan, J. F. (1979). “Snow loads and roof failures.” Proc. Struct. Engrg. Assn. Calif., 38th Ann. Conv., San Francisco, Calif.
12.
Metal Building Manufacturers Association. (1986). Low rise building systems manual. Cleveland, Ohio.
13.
Newark, M. J. (1984). “A new look at ground snow loads in Canada.” Proc., 41st East. Snow Conf., New Carrolton, Md.
14.
O'Rourke, M. J., Koch, P., and Redfield, R. (1983). “Analysis of roof snow load case studies, uniform loads.” CRREL Rept. 83‐1, Hanover, N.H.
15.
O'Rourke, M. J., and Stiefel, U. (1983). “Roof snow loads for structural design.” J. Struct. Engrg., 109(7), 1527–1537.
16.
O'Rourke, M. J., Speck, R. S., Jr., and Stiefel, U. (1985). “Drift snow loads on multilevel roofs.” J. Struct. Engrg., ASCE, 111(2), 290–306.
17.
O'Rourke, M. J., and Wood, E. (1986). “Improved relationship for drift loads on buildings,” Can. J. Civ. Engrg., 13(6), 647–652.
18.
O'Rourke, M. J., Tobiasson, W., and Wood, E. (1986). “Proposed code provisions for drifted snow loads.” J. Struct. Engrg., ASCE, 112(9), 2080–2108.
19.
Peter, B. B. W., Dalgliesh, W. A., and Schriever, W. R. (1963). “Variation of snow loads on roofs.” Trans. Engrg. Inst. Can., 6(A‐1), 1–11.
20.
Petersen, R. L. (1986). “Simulating snow loads on fabric roofs.” Proc. Spec. Conf. Adv. in Aero., Fluid. Mech. and Hydr., EM & HY Div/ASCE, Minneapolis, Minn.
21.
Placer County, Building Division. (1985). Placer County code, Ch. 4, Sec. 4.20(v), “Snow Load Design,” Auburn, Calif.
22.
Sack, R. L., and Sheikh‐Taheri, A. (1986). Ground and roof snow loads for Idaho. Dept. of Civil Eng., Univ. of Idaho, Moscow, Idaho.
23.
Sack, R. L., Arnholtz, D., and Haldeman, J. S. (1987). “Sloped roof snow loads using simulation.” J. Struct. Engrg., ASCE, 113(8), 1820–1833.
24.
Sack, R. L. (1988). “Snow loads on sloped roofs.” J. Struct. Engrg., ASCE, 114(3). 501–517.
25.
Schriever, W. R., Faucher, Y., and Lutes, D. A. (1967). “Snow accumulations in Canada: Case histories: I, Tech. Pap. 237, Div. Build. Res. NRC No. 9287, NRCC, Ottawa, Ont., 1–29.
26.
Standard building code. (1985). Southern Building Code Congress International, Inc., Birmingham, Ala.
27.
Stenberg, P., and Videon, F. (1978). “Recommended snow loads for Montana structures.” Dept. of Civ. Eng./Eng. Mech. Montana State Univ., Bozeman, Mont.
28.
Structural Engineers Association of Colorado. (1984). “Snow load design data for Colorado.” Boulder, Colo.
29.
Structural Engineers Association of Northern California. (1964). “Snow load design data for the Lake Tahoe Area,” San Francisco, Calif.
30.
Structural Engineers Association of Oregon. (1971). “Snow load analysis for Oregon,” Portland, Oreg.
31.
Structural Engineers Association of Washington. (1981). “Snow load analysis for Washington.” Seattle, Wash.
32.
Supplement to the national building code of Canada 1985. (1985). Part 4 NRCC No. 23178, Assoc. Comm. Nat. Bldg. Code, National Resour. Council of Canada, Ottawa, Ont.
33.
Taylor, D. A. (1980). “Roof snow loads in Canada.” Can. J. Civ. Engrg., 7(1), 1–18.
34.
Taylor, D. A. (1985). “Snow loads on sloping roofs: Two pilot studies in the Ottawa area.” Can. J. Civ. Engrg., 12(2), 334–343.
35.
The uniform building code. (1985). International Conference of Building Officials, Whittier, Calif.
Information & Authors
Information
Published In
Copyright
Copyright © 1989 ASCE.
History
Published online: Feb 1, 1989
Published in print: Feb 1989
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.