Reinforced Soil‐Metal Structures
Publication: Journal of Structural Engineering
Volume 114, Issue 6
Abstract
Many of the existing soil‐metal structures have shown signs of serious distress, including local failures. A major cause of these distress conditions is believed to be due to poor compaction of the soil backfill. To correct this shortcoming, research work was undertaken to examine the following design concept: (1) The metal structure is tied back into the surrounding granular soil; and (2) the soil cover above the metal structure is reinforced. Experimental results, obtained from tests on five models, were compared to analytical results based on the finite‐element method. The results show that adopting this new design concept: (1) Provides greater stability to the metal structure; (2) improves the stiffness of the soil; (3) activates the entire reinforced‐soil medium to assist in the transmission of the load; (4) enhances the arching effect; and (5) makes it possible to observe very large deformations in the metal structure before its collapse and thus avoid catastrophic failure. A simplified design method and an illustrated design example are presented.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Al‐Haussaini, M. M. and Johnson, L. D. (1978). “Numerical analysis of a reinforced earth wall.” Proc. Symposium on Earth Reinforcement, ASCE, 98–126.
2.
Alizadeh, A. (1977). “Evaluation of the computer program for the analysis and design of culverts (CANDE).” Report by H. G. Engineering Ltd. for the Ontario Ministry of Transportation and Communications, Downsview, Ontario.
3.
Chang, J. C., and Forsyth, R. A. (1977). “Finite element analysis of reinforced earth wall.” J. Geotech. Engrg. Div., ASCE, 103(GT7), 711–724.
4.
Clough, G. W., and Duncan, J. M. (1971). “Finite element analysis of retaining wall behaviour.” J. Soil Mech. Found. Div., ASCE, 97(SM12), 1657–1673.
5.
“Culvert failure kills five.” (1983). Engrg. News Record, Jan. 27, 12.
6.
Duncan, J. M. (1976). “Finite element analysis of buried flexible culvert structures.” Laurits Bjerrum Memorial Volume, Norwegian Geotechnical Institute, Oslo, Norway, 213–222.
7.
Hafez, H. H., and Abdel‐Sayed, G. (1983). “Finite element analysis of soil‐steel structures.” Can. J. Civ. Engrg., 10(2), 287–294.
8.
Janbu, N. (1963). “Soil‐compressibility as determined by oedometer and triaxial tests.” Proc., European Conference on Soil Mechanics and Foundation Engineering, Vol. 1, Weisbaden, Germany, 19–25.
9.
Kennedy, J. B., Laba, J. T., and Mossaad, M. (1980). “Reinforced earth retaining walls under strip loading.” Can. Geotech. J., 17(3), 382–394.
10.
Kondner, R. L., and Zelasko, J. S. (1963). “A hyperbolic stress‐strain formulation for sands.” Proc., 2nd Pan‐American Conference on Soil Mechanics and Foundation Engineering, Brazil, Vol. 1, 289–324.
11.
Laba, J. T., and Kennedy, J. B. (1986). “Reinforced earth retaining wall analysis and design.” Can. Geotech. J., 23(3), 317–326.
12.
Moore, R. G. (1986). “Observed signs of distress in soil‐steel structures.” Proc., Second International Conference on Short and Medium Span Bridges, Ottawa, Canada, 343–357.
13.
Ontario highway bridge design code. (1983). Ministry of Transportation and Communications of the Province of Ontario, Downsview, Ontario, Canada.
14.
Romstad, K. M., Herrmann, L. R., and Shen, C. K. (1976). “Integrated study of reinforced earth—I: Theoretical formulation.” J. Geotech. Engrg. Div., ASCE, 102(GT5), 457–471.
15.
Shen, C. K., Romstad, K. M., and Herrmann, L. R. (1976). “Integrated study of reinforced earth—II: Behavior and design.” J. Geotech. Engrg. Div., ASCE, 102(GT6), 577–590.
16.
Tsui, Y., and Clough, G. W. (1974). “Plane strain approximations in finite element analysis of temporary walls.” Proc. Biannual ASCE Geotechnical Conference, Austin, Tex.
17.
Wong, K. S., and Duncan, J. M. (1974). “Hyperbolic stress‐strain parameters for nonlinear finite element analyses of stresses and movements in earth masses.” Geotechnical Engineering Report TE74‐3, University of California, Berkeley, Calif.
Information & Authors
Information
Published In
Copyright
Copyright © 1988 ASCE.
History
Published online: Jun 1, 1988
Published in print: Jun 1988
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.